This part holds the rinse aid liquid in the dispenser until the timer activates the rinse cycle.
How Buying OEM Parts Can Save You Time and Money
Part Videos
Replacing your KitchenAid Dishwasher Rinse Aid Cap
Troubleshooting
This part fixes the following symptoms:
Leaking | Will not dispense detergent | Not cleaning dishes properly | Not drying dishes properly
This part works with the following products:
Dishwasher.
This part works with the following products:
KitchenAid, Whirlpool.
Part# WPW10077881 replaces these:
AP6014865, W10077881
Customer Reviews
Average Rating:
★★★★★
★★★★★
16 Reviews
4.9
Filter By Rating:
5 Stars
15
4 Stars
1
3 Stars
0
2 Stars
0
1 Star
0
< Prev
1
2
Next >
Sort by:
Search filter:
Clear Filter
Your search term must have 3 or more characters.
Keep searches simple. Use keywords, e.g. "leaking", "pump", "broken" or "fit".
Sorry, we couldn't find any existing reviews that matched. Try using some different or simpler keywords.
★★★★★
★★★★★
Darren S - April 22, 2019
Verified Purchase
It’s a cap
it worked
★★★★★
★★★★★
Heather S - November 19, 2022
Verified Purchase
Easy replace
The part arrived quickly. It fit beautifully in my dishwasher
★★★★★
★★★★★
Silvia D - September 15, 2021
Verified Purchase
Excellent service
Thank you for your excellent service. The part is a perfect fit. A little too expensive but I still needed it for my dishes to be spotless. The shipping for a small weightless part like this is a bit too much.
★★★★★
★★★★★
Kim J - January 15, 2023
Verified Purchase
the perfect outcome!
Finding the part on your website, having it shipped in record time, receiving it in perfect condition, and installing it immediately was outstaanding! A real pleasure to find such a service driven firm. I thank you, my wife thanks you. Excellant and timely solution.
★★★★★
★★★★★
Laurel W - November 27, 2022
Verified Purchase
Perfect fit
Part is like the original , fits perfect for a dishwasher that is 14 years old
★★★★★
★★★★★
Juan C - October 17, 2019
Verified Purchase
Just what I needed
Missing this part in my dishwasher. Quick and easy order.
★★★★★
★★★★★
Deborah S - October 23, 2018
Verified Purchase
Very pleased
Delivered quickly and fit perfectly on my dishwasher
★★★★★
★★★★★
Christina S - April 4, 2020
Verified Purchase
Worked as expected
The part came very quickly and was easy to install.
★★★★★
★★★★★
Laurel S - December 27, 2019
Verified Purchase
Perfect
Exactly what was needed
★★★★★
★★★★★
Sylviane F - June 14, 2019
Verified Purchase
Easy repair
I receive the part very fast and my dishwasher is back to normal
< Prev
1
2
Next >
Customer Repair Stories
Average Repair Rating: 5.0 / 5.0, 14 reviews.
What's this?
< Prev
1
2
Next >
Sort by:
Search filter:
Clear Filter
Your search term must have 3 or more characters.
Keep searches simple. Use keywords, e.g. "leaking", "pump", "broken" or "fit".
Sorry, we couldn't find any existing installation instruction that matched.
Rinse Aid Cap was not secured and during dishwaher run the cap sat on the heating coil and melted.
This is simple, we don't know exactly how, but when we used the dishwasher the cap must not have been twisted correctly, and after the dishwasher shut down we discovered the cap was on the heating coil and melted. I know that it was easy to fix, but the reason I ordered it from PartsSelect was their price was much lower than Kitchen Aids, (the maker), Lowes (where we bought it), and other sites we searched for the part.
Other Parts Used:
James from Brandon, FL
Difficulty Level:
Really Easy
Total Repair Time:
Less than 15 mins
58 of 61 peoplefound this instruction helpful.
Was this instruction helpful to you?
Thank you for voting!
Original rinse aid cap warped by heating element
Just replaced the original cap with the new one. It fit perfectly. Thanks. P.S. - I would rate this excellent. I would give it 5-stars.
Other Parts Used:
Mary from Bellingham, WA
Difficulty Level:
Really Easy
Total Repair Time:
Less than 15 mins
11 of 12 peoplefound this instruction helpful.
Was this instruction helpful to you?
Thank you for voting!
Part melted in the d/w
screwed the new cap on, voila. just need to make sure you look and get the right cap; lots of different ones available.
Other Parts Used:
Allen from Fredericksburg, VA
Difficulty Level:
Really Easy
Total Repair Time:
Less than 15 mins
5 of 6 peoplefound this instruction helpful.
Was this instruction helpful to you?
Thank you for voting!
Previous rinse cap fell off and melted
Without the rinse cap appliance was not rinsing properly, partselect made it easy to find necessary information to find part. Had it within a couple of days, replaced the cap within seconds and works just like before.
Other Parts Used:
Jessica from Lincolnshire, IL
Difficulty Level:
Easy
Total Repair Time:
Less than 15 mins
4 of 6 peoplefound this instruction helpful.
Was this instruction helpful to you?
Thank you for voting!
a rince cap fell onto the heating element and the cap and washer was melted
I went on line to Part Select and within minutes found what I needed. When I contacted Randy, a company representitive, he was quick to respond to my questions and cleared up my concerns. I will definitely use the Part Select again. thanks
Other Parts Used:
patricia from huntington station, NY
Difficulty Level:
Really Easy
Total Repair Time:
Less than 15 mins
3 of 4 peoplefound this instruction helpful.
Was this instruction helpful to you?
Thank you for voting!
Rinse Aid Cap was melted
Replaced the cap with a new one.
Other Parts Used:
Gerald from Winfield, PA
Difficulty Level:
Really Easy
Total Repair Time:
Less than 15 mins
3 of 4 peoplefound this instruction helpful.
Was this instruction helpful to you?
Thank you for voting!
Melted the rinse aid cap
Took the new part out of the package and put it into the dishwasher--simple as that.
Other Parts Used:
Linda from Spring Hill, FL
Difficulty Level:
Really Easy
Total Repair Time:
Less than 15 mins
2 of 3 peoplefound this instruction helpful.
Was this instruction helpful to you?
Thank you for voting!
Rinse Aid cap broke
Just replaced the Rinse Aid cap, the same as if I had just refilled the Rinse Aid unit.
Other Parts Used:
Suzanne from UPLAND, CA
Difficulty Level:
Very Easy
Total Repair Time:
Less than 15 mins
1 personfound this instruction helpful.
Was this instruction helpful to you?
Thank you for voting!
Rinse Aid Cap Melted
When the Rinse Aid Cap melted, the JetDry liquid leaked into the dishwasher creating heaps of suds which resulted in water leaking from the dishwasher. The replacement cap from PartSelect was a perfect fit. I then bailed the remaining water from the dishwasher drum and wiped out the baked on coating of JetDry. Then poured in a cup of olive oil and ran a full cleaning cycle without soap. The oil keeps the suds down. Once the excess rise aid was flushed out of the dishwasher, it is working good as new.
Other Parts Used:
Thomas from GLENSHAW, PA
Difficulty Level:
Very Easy
Total Repair Time:
Less than 15 mins
1 personfound this instruction helpful.
Was this instruction helpful to you?
Thank you for voting!
Rinse aid cap fell off while washer was running.
Too easy to even discuss
Other Parts Used:
Joyce from FLORENCE, KY
Difficulty Level:
Really Easy
Total Repair Time:
15 - 30 mins
1 personfound this instruction helpful.
Was this instruction helpful to you?
Thank you for voting!
< Prev
1
2
Next >
Questions and Answers
We're sorry, but our Q&A experts are temporarily unavailable.
Please check back later if you still haven't found the answer you need.
7 questions answered by our experts.
< Prev
1
Next >
Sort by:
Search filter:
Clear Filter
Your search term must have 3 or more characters.
Keep searches simple. Use keywords, e.g. "leaking", "pump", "broken" or "fit".
Sorry, we couldn't find any existing answers that matched.Try using some different or simpler keywords, or submit your new question by using the "Ask a Question" button above!
Randall
February 3, 2018
Does this cap fit this model?
For model number KUDE70FVSS2
Hello Randall,
Thanks for your question. Yes, this part is compatible with your model.
I hope this helps.
3 people found this helpful.
Was this helpful?
Thank you for voting!
Kathy
January 3, 2018
Is this the correct part for the rinse aid compartment on the above model? Like others, ours melted. Thank you.
For model number KUDK03CTBL2
Hi Kathy, Thank you for the question. Yes, this is the correct rinse aid cap for the model number provided. Good luck with the repair!
2 people found this helpful.
Was this helpful?
Thank you for voting!
Bill
January 8, 2019
I need a rinse aid cap, but first the existing one broke and fell into its fitting. How can i remover the cap that is down in the fitting (hole). I can't get it out with a screw driver, pinch nose pliers, etc. Any known way to remove it because it is down in the fitting and i can't get a hold on it strong enough to pull it up ?
For model number MDB774(AWB2
Hello Bill, thank you for your question. It sounds like you have tried everything I can think of, as far as tools to remove the broken part. The dispenser is a sealed unit so you can't remove the back or the face of the dispenser. If the rinse aid cap is down in there and can't be removed the whole dispenser would have to be replaced, part number Part Number: PS11750167.
1 person found this helpful.
Was this helpful?
Thank you for voting!
Kathy
March 25, 2019
Hi, will this rinse cap fit my ka dishwasher?Thank you
For model number KUDC10FXSS5
Hello Kathy, thank you for inquiring. This Rinse Aid Cap is not compatible to your model. For your model it is not sold separate from the Dispenser. The Dispenser for your model is part PS11752438.
1 person found this helpful.
Was this helpful?
Thank you for voting!
Donna
January 25, 2022
will this dispenser cap fit my dishwasher
For model number ffid2423rs3b
Hi Donna,
Thank you for your question. The rinse aid cap listed for your dishwasher is only sold with the detergent dispenser. The part number listed under your model number for the detergent dispenser is PS11770487. If you would like to place an order for it, customer service is open 7 days a week and anyone will be happy to assist you. Please feel free to give us a call. We look forward to hearing from you!
Hello Travis, thank you for the question. Yes, this part will fit your model. If you need help placing an order for it, please feel free to give us a call. We look forward to hearing from you!
1 person found this helpful.
Was this helpful?
Thank you for voting!
Weaver
August 23, 2023
Is this rinse cap compatable with the whirlpool dishwasher model number above.
For model number wdf530payw5
Hi Weaver, thank you for reaching out. The rinse aid cap you are referring to is not compatible with your model. The compatible rinse aid cap for your model is part number PS11746426. Glad to be of assistance!
Fresh Flow Produce Preserver is made for your refrigerator to help keep produce fresh for longer by absorbing the chemical, ethylene, that causes your fruits and vegetables to ripen quicker. Your produce could be fresh f...
This front load washer cleaner removes odor-causing residue. Use it once a month and it will keep your machine fresh and clean. Package comes with 3 tablets.
Affresh dishwasher Cleaner is specially formulated to help remove limescale and mineral build-up that can be unsightly and could affect your dishwasher's performance. Each tablet is designed to clean inside your machine ...
Make your cooktop shine with Frigidaire ReadyClean Glass and Ceramic Cleaner. Our scratch-free, streak-free formula removes smudges, grease, burnt-on food, dirt and oil, while protecting and polishing to repel dust and d...
Affresh® Dishwasher Cleaner is the #1 recommended cleaner by Whirlpool, KitchenAid, and Maytag brands, designed to remove limescale and mineral build-up that can affect your dishwasher’s performance. These powerful table...
Model Cross Reference
This part works with the following models:
PartSelect Number: PS11748135
Manufacturer Part Number: WPW10077881
