Product Description
Range Gas Valve Assembly Specifications
This part controls the gas supply for both the bake and broil burners.
How Buying OEM Parts Can Save You Time and Money
Troubleshooting
This part fixes the following symptoms:
Little to no heat when baking | Will Not Start
This part works with the following products:
Range.
This part works with the following products:
KitchenAid, Whirlpool.
Part# WP9763716 replaces these:
AP6014168, 4453999, 9763716
Customer Reviews
Filter By Rating:
- < Prev
- 1
- Next >
Sort by:
Search filter:
Clear Filter
Your search term must have 3 or more characters.
Keep searches simple. Use keywords, e.g. "leaking", "pump", "broken" or "fit".
Sorry, we couldn't find any existing reviews that matched. Try using some different or simpler keywords.
Stuart A - April 5, 2023
Verified Purchase
Easy Repair, part was a perfect match.
Very easy to install and oven is now working perfectly. Just wish I had replaced this part first instead of last of three tries.
- < Prev
- 1
- Next >
Customer Repair Stories
Average Repair Rating: 4.6 / 5.0, 3 reviews.
What's this?
- < Prev
- 1
- Next >
Sort by:
Search filter:
Clear Filter
Your search term must have 3 or more characters.
Keep searches simple. Use keywords, e.g. "leaking", "pump", "broken" or "fit".
Sorry, we couldn't find any existing installation instruction that matched.
oven and broiler not working
I just looked at the tech sheet on the range and tested the gas valve with an ohm meter to see how much resistance I had and compared it to the tech sheet and noticed the gas valve was bad. So I replaced it with a new one from part select which arrived very fast. It was quite easy to replaced it.
Other Parts Used:
-
Pamela from chicago, IL
-
Difficulty Level:Really Easy
-
Total Repair Time:Less than 15 mins
-
Tools:Screw drivers, Wrench (Adjustable)
34 of 45 people
found this instruction helpful.
Was this instruction helpful to you?
Thank you for voting!
Oven not preheating
I called the place that I ordered the range from and set up a repair date. The repairman came out and diagnosed the problem and had to order the part (Valve). I noticed on the repair ticket the cost of $172.00. I checked out this site and found it a whole lot cheaper. I called the repairman and advised that I found the part cheaper and expected them to tell me they would adjust the price of the repair. They told me to order the part and let them know when it came in. I got it two days after I ordered it. I called the repairman who came out and installed it.
Other Parts Used:
-
James from Bel Air, MD
-
Difficulty Level:Easy
-
Total Repair Time:15 - 30 mins
13 of 16 people
found this instruction helpful.
Was this instruction helpful to you?
Thank you for voting!
Kitchen Aid Oven (gas range) will not preheat
My Kitchen Aid (Model KGR1801) gas range would not preheat. I did some online research and found that the gas range valve regulator is most likely the problem. I spoke to someone from a local appliance repair shop and he informed me that the gas valve is known to fail on this particular Kitchen Aid oven. I ordered the part from PartsSelect.com for a very reasonable price, received it the next morning by 10AM. In about 10 minutes I installed the gas valve and fired up the oven. I highly recommend PartsSelect.com.
Other Parts Used:
-
Catherine from Old Bethpage, NY
-
Difficulty Level:Really Easy
-
Total Repair Time:Less than 15 mins
-
Tools:Screw drivers, Wrench set
9 of 14 people
found this instruction helpful.
Was this instruction helpful to you?
Thank you for voting!
- < Prev
- 1
- Next >
Questions and Answers
Ask our experts a question about this part and we'll get back to you as soon as possible!
- < Prev
- 1
- Next >
Sort by:
Search filter:
Clear Filter
Your search term must have 3 or more characters.
Keep searches simple. Use keywords, e.g. "leaking", "pump", "broken" or "fit".
Sorry, we couldn't find any existing answers that matched.Try using some different or simpler keywords, or submit your new question by using the "Ask a Question" button above!
Frank Preciado
August 4, 2018
Is the way to change over to natural gas from propane.
For model number KGSS907SSS00
Hi Frank,
Thank you for your question. In order to switch back to natural gas, you will need to purchase 2 of the surface burner base orifice holder - left rear and right front, part number PS11748689. 1 of the surface burner base orifice holder - right rear, part number PS11748694. And you will need to purchase the triple crown burner assembly, part number PS11747334. I hope this helps. Thank you and have a great day!
3 people found this helpful.
Was this helpful?
Thank you for voting!
Dana
May 2, 2018
When installing the gas regulator, there are two wires that were already off the posts when i was able to see the posts. They are blue and red. The orange was the only larger one, so it was easy to match. Can you tell me which color is top post and which color is bottom
For model number KGSS907SSS00
Hi Dana,
Thank you for your question. For information on how to install the wires, please consult your owner's manual or you will need to contact Whirlpool. Their telephone number is 1-866-698-2538. I hope this helps. Thank you and have a great day!
1 person found this helpful.
Was this helpful?
Thank you for voting!
- < Prev
- 1
- Next >
✖
Ask a Question
Ask our experts a question on this part and we'll respond as soon as we can.
Sorry, we couldn't find a match for "".
Here's a guide for finding your model number.
Something went wrong. Please try again later.
Your Question Has Been Submitted!
Our experts will send you an email as soon as your question has been answered.
Related Parts
Model Cross Reference
This part works with the following models:
PartSelect Number: PS11747403
Manufacturer Part Number: WP9763716
Manufacturer Part Number: WP9763716
Brand
Model Number
Description