This 18 ml bottle of white appliance touch-up paint is used to cover scratches or marks on your appliance. The white touch-up paint can be used on refrigerators, microwaves, ranges, clothes dryers, an...
$10.20
In Stock
Order within the next 10 hrs and your part ships today!
This oven rack is chrome in color and is approximately 24.76 inches wide by 15.78 inches deep. If your old oven rack is damaged, you should consider replacing it. Many of our customers have determined...
$108.23
In Stock
Order within the next 10 hrs and your part ships today!
This is a multi-use and multi-appliance screw. It can be used on a microwave, refrigerator, range/oven, air conditioner, dehumidifier, washer, or dryer. The measurements of this screw are 8 x 1/2 inch...
$26.51
In Stock
Order within the next 10 hrs and your part ships today!
This part is the replacement door gasket for your oven. It is made of gray rubber and is sold individually. The door gasket runs along the circumference of the oven door and creates a seal that insula...
$40.94
In Stock
Order within the next 10 hrs and your part ships today!
This part ignites the gas to light the oven burner.
$115.69
In Stock
Order within the next 10 hrs and your part ships today!
Questions And Answers for GW395LEPS00
Ask our experts a question about this model and we'll get back to you as soon as possible!
3 questions answered by our experts.
< Prev
1
Next >
Sort by:
Search filter:
Clear Filter
Your search term must have 3 or more characters.
Keep searches simple. Use keywords, e.g. "leaking", "pump", "broken" or "fit".
Sorry, we couldn't find any existing answers that matched.Try using some different or simpler keywords, or submit your new question by using the "Ask a Question" button above!
Dawn
January 13, 2020
During the clean up mode, the oven lights are off and door to oven wont open. How do i get it open?
For model number GW395LEPS00
Hello Dawn, here is some information we found on door locked during clean mode.
- If power was interrupted during a Self-Clean cycle, and the cycle did not resume, select the "Self Clean" option, then select "Cancel". Wait a couple of minutes then try to start the cycle again.
-If the oven clean cycle was started by mistake: Press Cancel/Off key. The oven will need to cool to approximately 200F(95C) before the oven door will open.
-Allow the oven to cool, approximately 30-90 minutes, move the latch arm to the left to unlock the door.
Reset power to the product:
Power unit down by turning off the circuit breaker(s) or fuse(s) for one (1) minute.
Power unit up by turning on the circuit breaker(s) or fuse(s).
Check the oven to see if oven has unlocked.
1 person found this helpful.
Was this helpful?
Thank you for voting!
David
December 30, 2021
Changing from natural gas to propane
For model number GW395LEPS00
Hello David, Thank you for contacting us. We have researched the model you have provided and have found the part you are looking for is PartSelect Number PS11731192 for the Conversion Kit. If you need help placing an order, customer service is open 7 days a week. Please feel free to give us a call. We look forward to hearing from you!
When I go to run the oven it does not respond to bake or any other button except for locking the door with the start button or E1 F5 if I press and hold the cancel button. The only other response I get are to rapid beeps. Would this be the control panel?
For model number GW395LEPS00
Hello Patrick, thank you for getting in touch. We have researched and found that the error code E1 F5 indicates an issue with the oven door lock assembly. We would recommend checking the door lock assembly, part number PS11750101, to solve the problem. Glad to be of help!
I searched similar problems on the web and learned that a whole lot of people have Kitchenaid stove with the same problem. They all stated that the thermostat burns when self cleaning. Since technician wanted $190.00, I decided to change it myself. The part cost me $40.00. To instal the thermostat, I removed the panel at the back of the stove and the thermostat is attached with two wires. After I replaced the thrmostat, the screen panel came on and I was able to open the door. I am posting this to tell people that anyone can do this.
This product comes in a bottle with a brush like Liquid Paper. It goes on incredibly easy. A second coat might be needed. I wanted to prevent rust from setting in so I covered the scratches and dings. The paint is a little brighter since my washer is 10 years old but it still looks great.
I just looked at the tech sheet on the range and tested the gas valve with an ohm meter to see how much resistance I had and compared it to the tech sheet and noticed the gas valve was bad. So I replaced it with a new one from part select which arrived very fast. It was quite easy to replaced it.
