Whirlpool WP9761958 - Terminal Block | PartSelect.ca
Terminal Block – Part Number: WP9761958
( Grid squares measure 1x1 inch )
Terminal Block – Part Number: WP9761958 Terminal Block – Part Number: WP9761958 https://partselectca.azureedge.net/Schematics/Maytag/HSDIUUU9.gif

Terminal Block

Your Price

CAD$35.32
In Stock

PartSelect Number PS11747341
Manufacturer Part Number WP9761958
Manufactured by Whirlpool

This is the terminal block for the power cord on an electric range.

This part works with the following brands: Whirlpool, KitchenAid, Kenmore, Estate, Roper, Maytag, Inglis, Amana, Jenn-Air, Admiral.

This part works with the following products: Range.

This part fixes the following symptoms: Will Not Start | Element will not heat

Questions & Answers
We're sorry, but our Q&A experts are temporarily unavailable.
Please check back later if you still haven't found the answer you need.
Sort by:
Keep searches simple. Use keywords, e.g. "leaking", "pump", "broken" or "fit".
Olga
November 26, 2017
The control panel is only lighting when the element knob is turned. The elements and the oven are not heating. I changed the cable and control panel is working now but nothing else. Can you help?
For model number GR478LXPS0
Hello Olga, Thanks for your question. Be sure the oven is unplugged prior to any repairs or tests. We would recommend testing the oven sensor, part number PS11749737, with a multimeter to see if it shows continuity. If it shows no continuity, replace it. I hope this helps.

1 person found this helpful.

Was this helpful?
Related Parts

Oven Sensor

CAD$107.54
In Stock
Jacqueline
January 4, 2018
Why does the oven only work with the door open? Once I close the door the oven and clock shuts off
For model number Rf364pxpb1
Hi Jacqueline, Thank you for the question. It sounds like there is a short in the wiring. I suggest testing the electrical outlet where the wiring comes into the appliance from the wall. Turn on the appliance, and test with the door closed across each wire to the ground wire of the house wiring and make sure there is 120 volts on both hot wires. If there is not, the problem is in the house wiring. If there is, then you will need to test and see where you are loosing the neutral in the unit. This can be a very hard thing to find and repair. You will need to test the wiring at the control board and sensor in the oven and where the door light switch plugs into ect. You will be able to test these with a Multi Meter. Hope this helps!

Was this helpful?
Schelley
November 15, 2018
My oven will not heat above 275. It stopped working all together so i ordered a temperature sensor and both elements installing them one at a time. Now it will heat to 275 and stops. The broiler element will not heat up at all. I need help finding out what other part that may fix this problem. Please advise, thank you!
For model number WFE364LVQ0
Hello Schelley, thank you for your question. If the elements and sensor were replaced the only other part that could be affecting the heating of the oven is the electronic control board. I hope this helps!

Was this helpful?
Doyle
May 30, 2019
Control panel went out & stove will not work. Burners on top work fine. What could be done to fix this? Could it be fuse or the control panel? Stove was only used a few times.
For model number TES325MQ4
Hello Doyle, Thank you for the question. This woudl be an issue with a defective Electric Control, PartSelect Number PS11743398. The defective control will need to be replaced. Hope this helps!

Was this helpful?
Related Parts

Electronic Control Board

CAD$439.58
Special Order
Linda
February 5, 2020
Will this work for my Whirlpool range, and does it come the the screws to mount it?
For model number whirlpool rf 114pxsb3
Hello Linda, thank you for your question. Yes, the PartSelect Number: PS11747341 is correct for that unit. It does not come with the screws to mount it. They are Part #: PS11741515. I hope this helps.

Was this helpful?
Related Parts

Screw

CAD$7.06
In Stock

Customer Repair Stories

Average Repair Rating: 4.0 / 5.0, 6 reviews What's this?
Sort by:
Keep searches simple. Use keywords, e.g. "leaking", "pump", "broken" or "fit".
Wesley from Spring Hill, FL
Difficulty Level:
Easy
Total Repair Time:
30 - 60 mins
Tools:
Screw drivers, Socket set
Parts Used:
WP9761958, WP8273992
stove/oven started popping like the 4th of July while on
Terminal block burned up along with 220 cord & front burner. With breaker off, disconnected the block & cord....and assembled new parts. Next, took 2 screws out of stove top and lifed stovetop up. Disconnected bracket holding burner-took off old burner & reattached new burner. Reattached bracket and put back screws..turn on breaker and everything is like new. Do not recommend service companies to do these repairs. Excellent service with this company on receiving parts within 24 hours. Original manufacturers mark up their prices 30-40% more...Part Select is the way to go. Thank you for your execellent service.
51 of 66 people found this instruction helpful.
Was this instruction helpful to you?
larry from alexandria, IN
Difficulty Level:
Easy
Total Repair Time:
15 - 30 mins
Tools:
Nutdriver, Screw drivers, Socket set
Parts Used:
WP9761958
bought floor model with loose cord that melted block terminal
Safety first always shut breaker off at box.
I unplugged stove, disconnected wires keeping in mind the color placement. Unscrewed one ground screw and removed terminal block. Attached new block with ground screw, replaced wires in correct order, re-attached plug. Then reattached safety cover. Pretty simple for d.i.y.
17 of 18 people found this instruction helpful.
Was this instruction helpful to you?
Jeffrey from Davie, FL
Difficulty Level:
Easy
Total Repair Time:
15 - 30 mins
Tools:
Pliers, Screw drivers, Socket set
Parts Used:
WP9761958
Burned Out Termincal Block
I discoverd my switch box locked with my stove electrical port and stove stopped functioning. Pulled my stove back and saw that the "terminal block" was melted on one side; hence, switch box locked in place to avoid a fire, thank goodness. Looked up part on internet, unplugged stove, took off terminal box, ordered part and replaced. BTW - PART SELECT is awesome; I received my part the very next day!!! :-) Very happy with their service.
15 of 17 people found this instruction helpful.
Was this instruction helpful to you?
Richard from Daytona Beach, AL
Difficulty Level:
Easy
Total Repair Time:
15 - 30 mins
Tools:
Nutdriver, Screw drivers
Parts Used:
WP9761958
someone did not install cord properly! they left a strong strain on one of the 3 wires, with a loose nut connection that caused it to heat and melt the plastic that poped out toward the rear metal cover and short circuited.
I cut the ends of the cord and went with direct wire (no round eye clip) to the back side of the terminal block and tightened firmly. It took about 20 Minutes.
15 of 20 people found this instruction helpful.
Was this instruction helpful to you?
Vincent from SHILOH, IL
Difficulty Level:
Very Easy
Total Repair Time:
15 - 30 mins
Tools:
Nutdriver, Screw drivers
Parts Used:
WP9761958
Electric contact connection melted, shorting out the range.
After unplugging electric service, loosened 3 Philips-head screws holding 3 wires from range and loosened 3 nuts holding wires from electric cord. Also removed 1 Philips-head screw holding grounding tab. Removed 2 Philips-head screws and removed the old block. Mounted new block with those screws and replaced and tightened all 6 wires.
4 of 4 people found this instruction helpful.
Was this instruction helpful to you?
Thomas H. from COCOA, FL
Difficulty Level:
Very Easy
Total Repair Time:
30 - 60 mins
Tools:
Nutdriver, Screw drivers, Socket set
Parts Used:
WP9761958
Block had melted.R
Removed old terminal block & replaced with new one. Very simple. Did NOT have to replace cover as stated you should. Shipping could have been a little faster. Will definetly try this site again.
3 of 3 people found this instruction helpful.
Was this instruction helpful to you?

Model Cross Reference

Brand
Model Number
Description
Kenmore
22-98002
Range - Kenmore Range/Stove/Oven Model 22-.98002 (2298002, 22 98002) Parts
Kenmore
22-98009
Range - Kenmore Range/Stove/Oven Model 22-.98009 (2298009, 22 98009) Parts
Whirlpool
4RF302BXKQ1
Range - Freestanding, Electric
Whirlpool
4RF315PXMQ0
Range - Freestanding, Electric
Kenmore
66495272502
Range
Kenmore
66495273502
Range
Kenmore
66495274502
Range
Kenmore
66495279502
Range
Kenmore
66575962300
Range
Kenmore
66575963300
Range
Kenmore
66575964300
Range
Kenmore
66575969300
Range
Kenmore
66592142300
Range
Kenmore
66592143300
Range
Kenmore
66592144300
Range
Kenmore
66592152300
Range
Kenmore
66592153300
Range
Kenmore
66592154300
Range
Kenmore
66592162300
Range
Kenmore
66592163300
Range
Kenmore
66592164300
Range
Kenmore
66592169300
Range
Kenmore
66592172300
Range
Kenmore
66592172301
Range
Kenmore
66592173300
Range
Kenmore
66592173301
Range
Kenmore
66592174300
Range
Kenmore
66592174301
Range
Kenmore
66592179300
Range
Kenmore
66592179301
Range

All brand logos are trademarks of their respective owners.

The PartSelect logo is a Registered Trademark of Atlantic Laundry Centres, Ltd.

Copyright © 1999-2021, Eldis Group Partnership. All rights reserved.