Replacing your Maytag Refrigerator Water Filter Head
Troubleshooting
This part fixes the following symptoms:
Not dispensing water | Leaking
This part works with the following products:
Refrigerator.
This part works with the following products:
Maytag, Amana, Jenn-Air, KitchenAid.
Part# WP67004106 replaces these:
AP6010395, 67004089, 67004106, 8171248
Customer Reviews
Average Rating:
★★★★★
★★★★★
4 Reviews
4.8
Filter By Rating:
5 Stars
3
4 Stars
1
3 Stars
0
2 Stars
0
1 Star
0
< Prev
1
Next >
Sort by:
Search filter:
Clear Filter
Your search term must have 3 or more characters.
Keep searches simple. Use keywords, e.g. "leaking", "pump", "broken" or "fit".
Sorry, we couldn't find any existing reviews that matched. Try using some different or simpler keywords.
★★★★★
★★★★★
Howard G - December 6, 2018
Verified Purchase
Repair went perfectly, water pressure is back!
Part arrived quickly and as expected. Had lost significant pressure in water dispenser. Replacing the head assembly did the trick!
★★★★★
★★★★★
Dennis O - August 29, 2019
Verified Purchase
Wins best overall service!
I spend a lot of time purchasing on line and PartSelect wins as far as service! They even automatically sent me the video to install the part! My daughter and I installed the parts without a problem at all!! Thanks!
★★★★★
★★★★★
Val D - April 29, 2020
Verified Purchase
Worked as expected
Quick delivery and part was exactly what was ordered
★★★★★
★★★★★
Alex S - May 17, 2020
Verified Purchase
Fixed Our Problem
We found that the water line was slightly short. We improvised to make it work. Our issues with our broken problem was fixed. We looked up your online help twice and found that one of your service assistants was way better in direction than the other. Didn’t write the names down. We will always return to your company for repair parts. The part came SO quickly as always!
< Prev
1
Next >
Customer Repair Stories
Average Repair Rating: 4.3 / 5.0, 6 reviews.
What's this?
< Prev
1
Next >
Sort by:
Search filter:
Clear Filter
Your search term must have 3 or more characters.
Keep searches simple. Use keywords, e.g. "leaking", "pump", "broken" or "fit".
Sorry, we couldn't find any existing installation instruction that matched.
The water filter inlet tube cracked
Begin by turning off the water source from the wall, next using a line wrench, remove the brass water line fitting nut from the copper water line from the wall. Next remove the second water line from the plastic push fitting by depressing the fitting to release the water line. Remove the Styrofoam insulation piece that resides between the water lines that run into the refrigerator, then pull the old filter head out. Reverse steps for installation.
Other Parts Used:
wade from Waterford, VA
Difficulty Level:
Easy
Total Repair Time:
15 - 30 mins
Tools:
Nutdriver, Screw drivers
29 of 51 peoplefound this instruction helpful.
Was this instruction helpful to you?
Thank you for voting!
No ice or water at door
Removed the filter from inside the ref then disconneted the water line to filter and to ice maker on blue line just push line down then up to remove. Then pull whole assb. thru refreg. and install new one. very easy 2nd time mine went bad 1st time it coast almost $300.00 this time less than $50.00. Take your time and its fool proof.
Other Parts Used:
Harvey O. from Venice, FL
Difficulty Level:
Really Easy
Total Repair Time:
15 - 30 mins
Tools:
Nutdriver, Screw drivers, Wrench (Adjustable)
19 of 32 peoplefound this instruction helpful.
Was this instruction helpful to you?
Thank you for voting!
Water head filter was leaking
Followed the first set of instructions from the parts select website. It worked perfectly. Just note that the way to remove the "blue" tube is by pushing down on the fitting and then pull the tube out. Be careful with the styrofoam piece around the hole for the tubes as it can crumble around the edges.
Other Parts Used:
Lee from Yarmouth, ME
Difficulty Level:
Really Easy
Total Repair Time:
15 - 30 mins
Tools:
Wrench (Adjustable)
17 of 26 peoplefound this instruction helpful.
Was this instruction helpful to you?
Thank you for voting!
Hammer sound in head
Went great watch instruction on youtube but also have 40 years experience as a contractor which made it little easier to understand steps and procedures , but it solved the problem all working well now replace the head also water inlet valve same time, should be good to go on our fridge
Other Parts Used:
Wayne from ANGIER, NC
Difficulty Level:
Very Easy
Total Repair Time:
15 - 30 mins
Tools:
Nutdriver, Pliers, Wrench (Adjustable)
1 personfound this instruction helpful.
Was this instruction helpful to you?
Thank you for voting!
Low stream and knocking when filling water
Removed the fridge waterline from the main line using the adjustable wrench, pulled the waterlines from their brackets and removed the water filter cover. Once that was done just pulled out the old filter head and waterlines and reinstalled. Hardest part was putting the filter cover back on. Needed smaller hands.
Ask our experts a question about this part and we'll get back to you as soon as possible!
4 questions answered by our experts.
< Prev
1
Next >
Sort by:
Search filter:
Clear Filter
Your search term must have 3 or more characters.
Keep searches simple. Use keywords, e.g. "leaking", "pump", "broken" or "fit".
Sorry, we couldn't find any existing answers that matched.Try using some different or simpler keywords, or submit your new question by using the "Ask a Question" button above!
Doug
March 20, 2018
In door water dispenser will not work with filter installed. Changed out unit pump. Water will dispense with bypass cap installed.
For model number MFC2061HEW
Hello Doug, thank you for your question. There are a few things you can check to try and fix the issue. If you still have the original filter, you can reinstall it to see if the water flows. If it does, the issue could be with the new filter itself; is it an OEM filter, the right filter for the model? Double check to be sure the filter is made for your unit and is an OEM part. Was the filter soaked in water before installation? Sometimes if you don't wet the filter first, once they are installed the water pressure has a hard time soaking the inside of the filter. Soak the filter in water and reinstall to see if that will fix your problem. Also, you may have air trapped in the lines. The air creates a gap or pressure issue and the water does not flow out of the dispenser. You might get a slight trickle or nothing at all from the dispenser. Install the bypass plug and run water for 3-4 minutes to clear any air or pressure issues in the water lines. I hope this information helps!
2 people found this helpful.
Was this helpful?
Thank you for voting!
Paul Marks
November 12, 2017
The water dispenser is leaking you push the button and it doesn't shut off completely ,, is there a solenoid that turns it on and off or is part number wp67004106 the correct unit for our refrig, it was bought in 2006-7 time frame.
For model number JFC2089HES
Hi Paul,
Thank you for your inquiry. If the water dispenser is leaking, you will need to check the water filter head, the dual water inlet valve, the water filter and the limit switch. I hope this helps. Thank you and have a great day!
1 person found this helpful.
Was this helpful?
Thank you for voting!
Paul
January 17, 2019
What is on the end of the red capped water line? My existing part has what appears to be a factory installed metal male threaded fitting that would not fit through the existing foam seal into the fridge.
For model number psd262lhew
Hello Paul, Thank you for the question. The red cap is just there for protect the end. You will need to remove it before the head is installed into the appliance. Thank you for your inquiry, good luck with this repair!
Was this helpful?
Thank you for voting!
Greg Glass
March 12, 2020
The water dispense & ice maker does not get water. Have replaced water filter,pump,and head water assembly.When button on dispenser is pushed it does make a noise that pump works. Any more suggestions. Thanks greg glass
For model number afd2535dew
Hello Greg, thank you for your question. We would recommend testing/replacing the switch PartSelect Number PS11738544. I hope this helps.
Fresh Flow Produce Preserver is made for your refrigerator to help keep produce fresh for longer by absorbing the chemical, ethylene, that causes your fruits and vegetables to ripen quicker. Your produce could be fresh f...
This front load washer cleaner removes odor-causing residue. Use it once a month and it will keep your machine fresh and clean. Package comes with 3 tablets.
This solid element restorer is for ranges and cooktops. Solid element restorer restores and protects solid elements from rusting and spotting. Follow the instructions on the label when using this product.
This low-odor gel, easily cleans away tough burnt-on deposits at room temperature. Apply the gel evenly on the cooled oven surface. Leave the gel to set overnight then wipe away with a clean cloth.
Make your cooktop shine with Frigidaire ReadyClean Glass and Ceramic Cleaner. Our scratch-free, streak-free formula removes smudges, grease, burnt-on food, dirt and oil, while protecting and polishing to repel dust and d...
Model Cross Reference
This part works with the following models:
PartSelect Number: PS11743574
Manufacturer Part Number: WP67004106
