This part acts as as safety mechanism that keeps the dryer from overheating. Once the dryer temperature reaches a certain point, this part will shut down power to the heating element.
How Buying OEM Parts Can Save You Time and Money
Part Videos
Replacing your Kenmore Dishwasher High Limit Thermostat
Troubleshooting
This part fixes the following symptoms:
Not drying dishes properly | Will Not Start | Not cleaning dishes properly
Keep searches simple. Use keywords, e.g. "leaking", "pump", "broken" or "fit".
Sorry, we couldn't find any existing reviews that matched. Try using some different or simpler keywords.
★★★★★
★★★★★
Rod J - May 13, 2022
Verified Purchase
Working great
The is working great. The video on your website on how to replace it was very helpful. Delivery was fast. Thanks.
★★★★★
★★★★★
Kevin C - November 30, 2021
Verified Purchase
Exact part
Plugged part in and dish washer is working as normal
★★★★★
★★★★★
Shelley B - March 20, 2021
Verified Purchase
Exactly what i needed
It got here quicker and for less $ than ordering from a local parts supplier. Unfortunately due to COVID and Christmas/ New Year holidays it still took nearly 2 weeks. Not Partselect's fault. I'll use them again.
★★★★★
★★★★★
John Russell B - December 3, 2019
Verified Purchase
Very Happy! This was the exact replacement part needed!
This came very quickly, and was the proper spec part for the model as the site indicated. The fact that this site will give you a ballpark percentage of if replacing this part fixes the problem was very helpful. As well, the linked tutorial videos were invaluable.Second time I used this site and it's resources and both times really facilitated in fixing the issue cheaply and quickly.
★★★★★
★★★★★
Shannon S - March 16, 2019
Verified Purchase
Easy
Easy to find part with drawings. Great for diy
★★★★★
★★★★★
Danny Y - October 3, 2018
Verified Purchase
Frustrated
Put part on and still dont work frustrated
★★★★★
★★★★★
Ami C - August 15, 2018
Verified Purchase
Easy repair and exact fit with original part
Changing that and the element fixed my problem where the cleaning cycle would just stop midway from time to time and the "clean" light would start blinking.
< Prev
1
Next >
Customer Repair Stories
Average Repair Rating: 3.2 / 5.0, 10 reviews.
What's this?
< Prev
1
Next >
Sort by:
Search filter:
Clear Filter
Your search term must have 3 or more characters.
Keep searches simple. Use keywords, e.g. "leaking", "pump", "broken" or "fit".
Sorry, we couldn't find any existing installation instruction that matched.
Unit Wouldn't Work. "Clean" Light Blinking
The unit had power, but the controls would not work. The "clean" light was blinking. I first replaced the control unit, no help. I then used the "just ask" and was told the problem was the heating element and/or the hi-temp thermostat. I replaced both those and used the re-set code pushing the "hi-temp/air dry, hi-temp/air dry" buttons. That did it. Easy parts to locate and replace. It took longer pulling the unit out and putting it back than it did to replace the parts.
dishwasher did not completed the drying cicle. heated dry button blinking
I just changed all parts that could make any effect in temperature control. even the thermal fuse. this was easy,looking in details all the drawings you have in your page. so I pulled out the dishwasher changed the parts and ready!! it work great now . thanks for your guide and help.
I shut off the power to the dishwasher, then I removed the front panel under the door. On the right side just behind the electrical box there are two wires going up to the hi-limit thermostat, (you may need a small mirror to see it), remove one screw that is holding the thermostat bracket, unplug the wires from the old thermostat and install new one. Screw bracket and thermostat back to the underside of the dishwasher, reinstall the front panel, turn on the power, done.
Other Parts Used:
George from Lisbon, CT
Difficulty Level:
Really Easy
Total Repair Time:
15 - 30 mins
Tools:
Screw drivers
33 of 45 peoplefound this instruction helpful.
Was this instruction helpful to you?
Thank you for voting!
No heat. Replaced thermostat
Was able to replace and repair without taking the dishwasher out. Thermostat is behind and to the left of the power junction box. Has 2 wires going to it. It is up against the bottom of tub. I used an angled mirror to see what I was doing. 1 small screw to detach and pull down thermostat. Be sure power is off before you start. Also reprogrammed defaults. Hit any button 1-2-3, 1-2-3, 1-2-3, fast and close door. Let it sit 15 min to run and re-set defaults. Now I have heat and dry dishes.
Other Parts Used:
Tim from BURTONSVILLE, MD
Difficulty Level:
Really Easy
Total Repair Time:
30 - 60 mins
Tools:
Screw drivers, Socket set
10 of 10 peoplefound this instruction helpful.
Was this instruction helpful to you?
Thank you for voting!
My dishwasher's heated dry cycle wasn't heating up
After pulling the dishwasher out from under the cabinet, I found it underneath near the back right side. I disconnected the old thermostat, unscrewed the clamp holding it into place, put the new thermostat in, screwed it back in and replaced the two plugs. Then I pushed the dishwasher back into place, and it initially didn't work until I found an online forum that was able to identify the reset command for my dishwasher (for the WDT710PAYM4, press any three buttons in a sequence of 1 2 3 1 2 3 1 2 3. After completing that all the lights lit up, and I shut the door leaving it for half an hour) Once the reset finished, the heated dry worked like it was suppose to.
Easily replaced motor and pump per video. Located high limit thermostat looking up from bottom and held on with two screw bracket. Reset code: push "Hi temp scour" then push "Air dry" then repeat push of "Hi temp scour" / "Air dry". Works like new - thanks.
Heating element not heating for both wash and dry.
Put in both a new element and thermostat. Did not fix problem. Using an ohm meter I did not measure any voltage to the thermostat. Suspect it’s a problem in the control unit, and decided to replace dishwasher.
Other Parts Used:
Thomas from SEATTLE, WA
Difficulty Level:
Really Easy
Total Repair Time:
30 - 60 mins
Tools:
Screw drivers
2 of 2 peoplefound this instruction helpful.
Was this instruction helpful to you?
Thank you for voting!
The light on the option panel "Hi-Temp Scour" is on.
I spent $290 in parts (4 in total). I replaced all of them. I resetted clicking 1,2,3 and 1,2,3 and 1,2 3 and then click the button normal. But The diswasher is still not working. The "hi-temp Scour" is still on. I would like to ask to the dishwasher technitian, why the diswasher is not working even I replaced the 4 parts related to the temperature? I followed all videos to replace the 4 parts and resett the dishwasher, but the dishwasher is not working. Thanks.
Clean light was flashing and washer would not start
Replaced heating element and high limit thermostat. Was suppose to fix the problem but did not. Replaced the control board and works now. All of these are easy to replace.
Other Parts Used:
Raymond from Beach, ND
Difficulty Level:
Easy
Total Repair Time:
15 - 30 mins
Tools:
Screw drivers
0 of 2 peoplefound this instruction helpful.
Was this instruction helpful to you?
Thank you for voting!
My dishwasher quietpartner ii was not cleaning my dishes. It seemed it was not heating correctly that the Hi temp wash or the heated dry.
I loooked up the main problems associated with that model which is provided on the website and ended up ordering a heating element and a thermostat. I replaced both parts it took me about 30 minutes. The dishwasher is working again and my wife is very happy. Thanks guys!!!
Ask our experts a question about this part and we'll get back to you as soon as possible!
49 questions answered by our experts.
< Prev
1
2
3
Next >
Sort by:
Search filter:
Clear Filter
Your search term must have 3 or more characters.
Keep searches simple. Use keywords, e.g. "leaking", "pump", "broken" or "fit".
Sorry, we couldn't find any existing answers that matched.Try using some different or simpler keywords, or submit your new question by using the "Ask a Question" button above!
Ashley
October 1, 2017
My dishwasher is not getting hot. The water going in is hot but it doesn't seem to be hot inside during the running cycle. I put it on high temp and heat dry to no avail. Heating element? Also, the little red button on the back of hose that connects to the faucet, when i draw water from it while dishwasher is running, it isn't hot water either.Thank you!
For model number WDP350PAAW1
Hello Ashley, thank you for contacting us. It could be the high limit thermostat, it could also be the heating element. You can test these with a multi meter. Good luck with the repair!
How can you tell if the high limit thermostat is not working and how can you check it to see if it is bad thanks
For model number Adb1100aww5
Hello Frank, Thank you for the question. The thermostat should read closed at room temp. You can test this with a multi-meter. Hope this helps!
13 people found this helpful.
Was this helpful?
Thank you for voting!
Brad
November 9, 2017
I have water to the machine and it starts and seems to run ok but is not cleaning well. I do not seem to have good cleaning pressure. I have cleaned all the filters and spray arms and changed the water inlet valve.
For model number WDF540PADT1
Hi Brad, Thank you for the question. The drain hose may not have a loop in it. The fill water may be draining out of the dishwasher by going straight out the drain hose. Be sure that your drain hose is not simply laying straight. It must have a loop in it or be off the ground so the water is not gravity fed out via the drain hose. You can also try to empty the dishwasher, set it to run a wash cycle. Let it fill with water as normal. When the dishwasher begins the cycle, open the door and see if the water level is just under the heating elements.If there is not enough water there may be a clog in your water fill line. Remove the fill hose where it attaches to the fill valve. Check to be sure there is nothing clogging the screen on the inlet fill valve. Also check the water fill line for blockage. You can also check the Overfill Control Switch if it is not filling with water at the correct level. If it is defective it can shut the water flow off too soon. Hope this helps!
5 people found this helpful.
Was this helpful?
Thank you for voting!
Drew
January 14, 2018
My dishwasher water does not get hot. We have tested the heating element and the high limit thermostat with a multimeter and they are both functional. What else could it be?
For model number Kenmore 665.13123k703
Hello Drew, Thank you for your inquiry. I would also check the bi-metal fuse/thermal fuse, door switch-and wires going from it to the control board, and the control board itself. Hope this helps!
4 people found this helpful.
Was this helpful?
Thank you for voting!
Josey
August 8, 2017
Sanitize light blinking at end of wash cycle. Heating element bad? Thermostat? Water entering machine is above 120f prior to start.
For model number WDF530PAY0
Hi Josey,
Thank you for the question, the flashing sanitize light indicates it did reach the sanitize temperature of 140-155 degrees in the final rinse. You can try running the hot water in the adjoining sink to get the hot water up to max temperature before starting the dishwasher. If this does not help try opening the door a bit during the wash cycle to see if there is steam indicating the water is hot. If the water is not getting hot then you may need to replace the heating element.
Hope this helps!
2 people found this helpful.
Was this helpful?
Thank you for voting!
Richard
January 10, 2019
I've replace the high limit theromastad and the door lock control. It wants to start you can hear water going into machine but then nothing happens. Any ideas of the possible problem.
For model number wdt720padm2
Hello Richard, thank you for your question. If there is water getting into the unit but the appliance will not start the cycle you will want to test the motor to see if it has failed. If the motor is fine, the issue would be with the electronic board which would have to be replaced. I hope this helps!
2 people found this helpful.
Was this helpful?
Thank you for voting!
Bahman
May 4, 2018
Thank you for the respond, are you referring to thermal fuse part #: W10344801? Isn't this part to shut the dishwasher off if the dishwasher shorts out or overheats? Regards
Hi Bahman, Thank you for the question. This part is used as a safety device to protect the dishwasher circuit from overload. If the temperature gets to high it will shut off the electrical current to the heating unit in the appliance. Hope this helps!
2 people found this helpful.
Was this helpful?
Thank you for voting!
Anthony
November 29, 2019
Whirlpool wdf320padb3 dishwasher will not run a complete cycle. It will start, fill up with water and seem to get hot, but stalls from there. It will drain completely if select the button. I’ve checked the drain lines, cleaned out filter, but no luck.Any idea what might be wrong?
For model number WDF320PADB3
Hello Anthony, thank you for inquiring. This sounds like a faulty Electronic Control, part number PS12704672 for your model dishwasher. Good luck with your repair!
1 person found this helpful.
Was this helpful?
Thank you for voting!
Jonathan
December 23, 2019
Is a heat element and high temp thermostat the answer? Our dishwasher starts to bring in water but won't cycle in any setting and then partially drains. When I open the door in the midst of operating, the water is partially warm and heating element is cool to the touch. I doubt this is a faulty latch or control board.Happy holidays :( hahaha.
For model number WDF520PADM0
Hi Jonathan, I would test the control board with a multimeter, you may not want to hear it but this well be the fault with your dishwasher. It could also be a faulty pump, you can test the pumps continuity as well. Thank you for your question and good luck with your repair!
Amana - fills with water, then doesn't do anything. I hear a series of 5 'pulses' of a low hum down inside. Periodic clicking up behind the control buttons in the door. Lights stay steady lit. No blinking. When I hit 'cancel, it drains fine. I shut off breaker for 15 min, but no help. Heating element was replaced 3 years ago. Thanks.
For model number ADB1100AWW3
Hello Joe, thank you for your inquiry. According to our research, the circulation pump, part number PS12347645, is faulty and will need to be replaced. We would recommend checking it to fix the issue. We hope this solves your problem!
This manufacturer-certified heating element is used to create heat during the dry cycle and increase water temperature during portions of the wash cycle when certain options are selected. If your dishes are not drying or...
Fresh Flow Produce Preserver is made for your refrigerator to help keep produce fresh for longer by absorbing the chemical, ethylene, that causes your fruits and vegetables to ripen quicker. Your produce could be fresh f...
This solid element restorer is for ranges and cooktops. Solid element restorer restores and protects solid elements from rusting and spotting. Follow the instructions on the label when using this product.
This front load washer cleaner removes odor-causing residue. Use it once a month and it will keep your machine fresh and clean. Package comes with 3 tablets.
This low-odor gel, easily cleans away tough burnt-on deposits at room temperature. Apply the gel evenly on the cooled oven surface. Leave the gel to set overnight then wipe away with a clean cloth.
Make your cooktop shine with Frigidaire ReadyClean Glass and Ceramic Cleaner. Our scratch-free, streak-free formula removes smudges, grease, burnt-on food, dirt and oil, while protecting and polishing to repel dust and d...
Our scratch-free, streak-free formula removes fingerprints, smudges, grease, dirt and oil, while protecting and polishing to repel dust and dirt. Use on all stainless steel appliance brands and surfaces. Stainless Steel ...
Model Cross Reference
This part works with the following models:
PartSelect Number: PS11743423
Manufacturer Part Number: WP661566
