Keep searches simple. Use keywords, e.g. "leaking", "pump", "broken" or "fit".
Sorry, we couldn't find any existing reviews that matched. Try using some different or simpler keywords.
★★★★★
★★★★★
Bob E - April 24, 2020
Verified Purchase
Easy ordering and prompt delivery!
When our dishwasher suddenly was without power we googled possible causes. Replacing the thermal fuse was the suggested fix. I looked up the part number in our manual and searched online for a Canadian supplier. I called the PartSelect 800# to be sure the warehouse was shipping as we were in the midst of the COVID lockdown. I was assured that the part was in stock and would be shipped immediately. I was advised that if it was not the correct part it could be returned for a full refund. We received the part within 2 business days and an email was sent with a helpful video to guide installation!. It worked! We saved a couple of hundred bucks I am sure by tackling this ourselves!
★★★★★
★★★★★
Brandon C - December 30, 2020
Verified Purchase
Works
Fast shipping easy to change same process as video
★★★★★
★★★★★
Michael M - October 16, 2019
Verified Purchase
Easy Repair of Thermal Switch
Don't be intimidated as this repair was super easy to perform. Reviewed on line the potential problem, and the part corrected the problem. Shipping was as promised.
★★★★★
★★★★★
Martin L - January 1, 2022
Verified Purchase
Exact part to fix my dishwasher
This part fit perfectly and fixed the issue. Quick delivery to Quebec Canada.
★★★★★
★★★★★
Timothee C - September 7, 2019
Verified Purchase
Easy peasy !
The fuse was just what i needed. a few minutes of easy work and my dishwasher was back on !
★★★★★
★★★★★
Normand T - August 26, 2020
Verified Purchase
Easy repair - Worked as expected
Fast shipping !
★★★★★
★★★★★
Russell B - October 8, 2019
Verified Purchase
Easy install
A++++++
★★★★★
★★★★★
Wei Ming Michael H - January 13, 2021
Verified Purchase
Right part and quick delivery
The part matched. After replacing the old part with the new part, my dishwasher worked again.
★★★★★
★★★★★
Jay N - March 7, 2021
Verified Purchase
Works like a charm
Part works. Installation video was very helpful. Thank you
★★★★★
★★★★★
Julie P - October 18, 2018
Verified Purchase
Perfect
Fast delivery, good packaging again perfect.
< Prev
1
2
Next >
Customer Repair Stories
Average Repair Rating: 4.2 / 5.0, 4 reviews.
What's this?
< Prev
1
Next >
Sort by:
Search filter:
Clear Filter
Your search term must have 3 or more characters.
Keep searches simple. Use keywords, e.g. "leaking", "pump", "broken" or "fit".
Sorry, we couldn't find any existing installation instruction that matched.
Touch pad on dishwasher dead
1. Remove the two screws that attach the bottom cover. 2. Remove the 2 screws that attach the door outer cover. 3. Remove the 8 screws that attache the door inner cover. 4. Remove the plastic cover over the electronic controller. 5. Remove the two connections to the thermal fuse. 6. Remove the thermal fuse. 7. Install the new thermal fuse. Reverse the above steps.
Other Parts Used:
Jeff from Boaz, KY
Difficulty Level:
Easy
Total Repair Time:
Less than 15 mins
Tools:
Screw drivers
113 of 132 peoplefound this instruction helpful.
Was this instruction helpful to you?
Thank you for voting!
dishwasher did not completed the drying cicle. heated dry button blinking
I just changed all parts that could make any effect in temperature control. even the thermal fuse. this was easy,looking in details all the drawings you have in your page. so I pulled out the dishwasher changed the parts and ready!! it work great now . thanks for your guide and help.
Unplug the dishwasher. Simply removed 8 screws on the inside of the door, removed the interior door panel. Next popped of the plastic protective electrical panel cover. Locate the Thermal fuse that had simple instructions provided. Removed the fuse and replaced the harness. Put everything back together. Plugged dishwasher back into electrical outlet...Dishwasher resumed with the cycle that the dishwasher was in when the fuse blew. Simple, Fast AND Reliable!!!
Other Parts Used:
Brad from Woodbury, MN
Difficulty Level:
Really Easy
Total Repair Time:
Less than 15 mins
36 of 43 peoplefound this instruction helpful.
Was this instruction helpful to you?
Thank you for voting!
The machine just quit in the middle of a cycle and there were no lights on the control panel
There were eight of the star head screws to remove to take the front off the dishwasher, then just followed the instructions that came with the part, which was a thermal fuse and the new wiring that accompanied the fuse in the order. The hardest part was getting the old wire out of the harness with the other three, but once I figured that out just slid the new wire into place and made the connections. I reinserted the screws, turned the power on and knock on wood shes still working.
Other Parts Used:
Ronald from Garland, TX
Difficulty Level:
Easy
Total Repair Time:
15 - 30 mins
Tools:
Nutdriver
30 of 39 peoplefound this instruction helpful.
Was this instruction helpful to you?
Thank you for voting!
< Prev
1
Next >
Questions and Answers
We're sorry, but our Q&A experts are temporarily unavailable.
Please check back later if you still haven't found the answer you need.
6 questions answered by our experts.
< Prev
1
Next >
Sort by:
Search filter:
Clear Filter
Your search term must have 3 or more characters.
Keep searches simple. Use keywords, e.g. "leaking", "pump", "broken" or "fit".
Sorry, we couldn't find any existing answers that matched.Try using some different or simpler keywords, or submit your new question by using the "Ask a Question" button above!
Dan
November 18, 2017
When we push any button the light comes on for that selection, but when we the push start button it will not start the dishwasher. Any suggestions?
For model number 66515762000
Hello Dan,
The thermal fuse and harness should be tested with a multimeter for continuity and replaced if it is not showing continuity, as that is the most common reason for the dishwasher not starting.
It is also worth testing the door switch (part number PS358749) for continuity and replacing it if it is not showing continuity, as that can prevent the dishwasher from starting as well.
Only if the prior two parts are testing for continuity should consider replacing the electronic control board itself, part number PS11746115.
I hope this helps.
Replaced the fuse and it worked and finished cycle. The second wash it stopped again. Got another fuse and it worked for half of the cycle. What would cause a thermal fuse to continue to blow?
For model number DU945PWPQ0
Hi Mary Beth, Thank you for the question. When changing the fuse always use a new wiring harness.If the harness is not changed it will blow the fuse again. Hope this helps!
2 people found this helpful.
Was this helpful?
Thank you for voting!
Richard
September 29, 2017
Kenmore dishwasher......select option on control panel....push on button....immediately shuts off panel. is this the thermal fuse problem? or control panel?
For model number 66515822000
Hi Richard, Thank you for the question. In this case I suggest replacing the Electronic Control Board,PartSelect Number PS11746115. The thermal fuse would need to be replaced if the appliance worked but had no display. Hope this helps!
The only lights that come on are cancel, and heavy and normal. The heavy and normal come on at times and blink when i press and hold cancel for a few seconds. Then when i press cancel again they all go off. I press normal then both normal and heavy come on and stay lit (doesn't happen when just heavy is pressed). When i press start the lights go off. Press and hold cancel and heavy and normal start blinking, and when i let go they all stay lit. Press start and the cancel button stays lit and the heavy and normal turn off. Then hold cancel and the heavy and normal start blinking again, as in the second sentence. I replaced the main control board with a new one and get the exact same sequence of events.
For model number DU945PWSQ0
Hello David, Thank you for your inquiry. If you've already replaced the main control board, I would check the control panel and touchpad assembly. Hope this helps!
1 person found this helpful.
Was this helpful?
Thank you for voting!
Jim
May 13, 2019
Unit shows lights on control panel push button for normal wash hear click to start but won't.Check thermal fuse it is black on top blown,can fuse just blow or possible thermostat cause this, so i should replace that also
For model number DU940QWDQ6
Hello Jim, Thank you for the question. We suggest replacing both parts at the same time. Normally if one blows it is an indication there is a issue with the other. Hope this helps!
1 person found this helpful.
Was this helpful?
Thank you for voting!
Mary
December 8, 2017
My husband replaced fuse a few months ago. It quick working again and now replaced a fuse and it worked for one load but second load it stopped before dispensing detergent. Water not drained. He didn’t replace the electrical that came with it. Could that be the problem?
For model number DU945PWPQO
Hello Mary, Thank you for the question. Yes, the electrical should also be replaced for proper operation of the fuse. Good luck with the repair!
Fresh Flow Produce Preserver is made for your refrigerator to help keep produce fresh for longer by absorbing the chemical, ethylene, that causes your fruits and vegetables to ripen quicker. Your produce could be fresh f...
Having a problem with a funky-smelling washing machine, or one that just doesn't seem to clean your clothes as well as it used to? Say hello to the Affresh Washing Machine Cleaner by Whirlpool. This powerful washing help...
Affresh dishwasher Cleaner is specially formulated to help remove limescale and mineral build-up that can be unsightly and could affect your dishwasher's performance. Each tablet is designed to clean inside your machine ...
Make your cooktop shine with Frigidaire ReadyClean Glass and Ceramic Cleaner. Our scratch-free, streak-free formula removes smudges, grease, burnt-on food, dirt and oil, while protecting and polishing to repel dust and d...
