Dispenser Control Board
$400.32
On Order
PartSelect Number
PS11743224
Manufacturer Part Number
WP61005274
Manufactured by
Whirlpool
Troubleshooting
This part fixes the following symptoms:
Not dispensing water
This part works with the following products:
Refrigerator.
This part works with the following products:
Maytag, Jenn-Air.
Part# WP61005274 replaces these:
AP6010048, 61005274
Customer Repair Stories
Average Repair Rating: 4.0 / 5.0, 6 reviews.
What's this?
- < Prev
- 1
- Next >
Sort by:
Search filter:
Clear Filter
Your search term must have 3 or more characters.
Keep searches simple. Use keywords, e.g. "leaking", "pump", "broken" or "fit".
Sorry, we couldn't find any existing installation instruction that matched.
The Ice and Water Dispenser Would Run on After the Glass Was Removed
I am going to be completely honest here. This problem had persisted for months. I finally decided that I would buy all the associated parts and repair the unit hoping to cover the problem. Much to my surprise, after carrying out the repair, using the instructions provided by PartSelect, I still had the problem. I decided to remove and LUBRICATE the button which depresses the Limit Switch when you push a glass against the rubber membrane. Low and behold the problem was solved. The frig is nine years old, so I feel I may have prevented other problems in the future by replacing the three parts. It was a follow the directions sort of repair. I was very pleased with PartSelect response to my order (received it next day) with standard shipping.
Other Parts Used:
-
Doug from Berkeley Springs, WV
-
Difficulty Level:Easy
-
Total Repair Time:30 - 60 mins
-
Tools:Screw drivers
23 of 26 people
found this instruction helpful.
Was this instruction helpful to you?
Thank you for voting!
Ice dispenser acting irradically
Simple to fix. Watched the video and noted what to do.
Replaced the control board, solenoid, and limit switch. Woks like new!
Replaced the control board, solenoid, and limit switch. Woks like new!
Other Parts Used:
-
Greg from Highland Village, TX
-
Difficulty Level:Easy
-
Total Repair Time:30 - 60 mins
-
Tools:Pliers, Screw drivers
15 of 21 people
found this instruction helpful.
Was this instruction helpful to you?
Thank you for voting!
Ice maker light stayed on.
Replaced the control board.
Other Parts Used:
-
Phillip from Minneapolis, MN
-
Difficulty Level:Really Easy
-
Total Repair Time:Less than 15 mins
-
Tools:Screw drivers
3 of 15 people
found this instruction helpful.
Was this instruction helpful to you?
Thank you for voting!
nothing would dispense. indicator lights behaved eratically.
unplug refrigerator. pull off bottom tray. remove 2 cover screws. lift and pull cover. remove remove switch bd. screws. remove remove ribbon cable , top right. remove connector top left. reassemble in reverse.
Other Parts Used:
-
rudy from furlong, PA
-
Difficulty Level:Really Easy
-
Total Repair Time:15 - 30 mins
-
Tools:Screw drivers
2 of 5 people
found this instruction helpful.
Was this instruction helpful to you?
Thank you for voting!
icemaker would not energize water solenoids, after it was replaced. icemaker had hung keeping water on. micro switch in fountain door had shorted out. I thought this may have ruined the control board.
after replacing control board, the water for ice maker still did not work. Took solenoid asy. out and the two cils for ice maker side were open. could not move wires to fountain solenoids because the fountain outlet to front was 3/8 inch and every thing else was 1/4 inch, so i had to order the solenoid assy. which is for coils. They
have also changed the tubing connections on the solenoids from compression screw on to insert
type once you push tubing in, there is no way
to remove it. reminds me of old electrical insert
connections which is a rip off.
have also changed the tubing connections on the solenoids from compression screw on to insert
type once you push tubing in, there is no way
to remove it. reminds me of old electrical insert
connections which is a rip off.
Other Parts Used:
-
W. J. from Linden, AL
-
Difficulty Level:Easy
-
Total Repair Time:15 - 30 mins
-
Tools:Nutdriver
2 of 3 people
found this instruction helpful.
Was this instruction helpful to you?
Thank you for voting!
Light wouln't go out in ice dispencer section
Extremely easy as I had alread taken the unit apart before except for the removal of the multipin connector from old board. Necessary to break the old board connector in order to get it off.
Might be nice for you to supply simple replacement instructions with the more expensive parts.
Might be nice for you to supply simple replacement instructions with the more expensive parts.
Other Parts Used:
-
David from Nesconset, NY
-
Difficulty Level:Really Easy
-
Total Repair Time:15 - 30 mins
-
Tools:Screw drivers
1 person
found this instruction helpful.
Was this instruction helpful to you?
Thank you for voting!
- < Prev
- 1
- Next >
Questions and Answers
We're sorry, but our Q&A experts are temporarily unavailable.
Please check back later if you still haven't found the answer you need.
- < Prev
- 1
- Next >
Sort by:
Search filter:
Clear Filter
Your search term must have 3 or more characters.
Keep searches simple. Use keywords, e.g. "leaking", "pump", "broken" or "fit".
Sorry, we couldn't find any existing answers that matched.Try using some different or simpler keywords, or submit your new question by using the "Ask a Question" button above!
Ollie
February 4, 2019
My ice dispenser won't dispense ice. Switch checks ok dispense board ckecks , this is front panel. Please help
For model number mzd2766geb
Hello Ollie, Thank you for contacting us! I suggest checking the following parts: PS2121513 Replacement Ice Maker, PS2003478 Ice Dispenser Solenoid and Door Kit, and PS2059882 Ice Chute Door Return Spring. Good luck with your repair!
2 people found this helpful.
Was this helpful?
Thank you for voting!
Gregory
July 27, 2021
Ice maker not making ice. I replaced the ice maker and dual water inlet valve. I also replace the water filter. The water dispenser will intermittently not shut off when dispensing water. A Jenn Air technician manually caused the ice maker to to cycle. Some water was brought to the tray but has not produced any ice in 24 hours. The thermostat is at the 3/4 mark toward the Max side. The icemaker is not getting water to flow. I have not had good ice for about six months before the unit failed and I replaced the parts. What am I missing?
For model number JCD2389GES
Hello Gregory, Thank you for the question. if both Valves were tested or replaced, we suggest checking the Water tubing for a clog or build up preventing enough water to flow through to the Ice Maker. You can also test the Cycling thermostat for continuity. We hope this helps!
Was this helpful?
Thank you for voting!
Related Parts:
Mike
November 24, 2022
Ice dispenser will not change from crushed ice to cubed. water works fine and crushed ice works fine.
For model number MZD2766GES
Hi Mike, thank you for reaching out. We would recommend checking the following parts to fix the issue: Fountain Switch Board, part number PS11743225, and Dispenser Control Board, part number PS11743224. We hope this helps! If you need help placing an order, customer service is open 7 days a week. Thanks again for your great question.
Was this helpful?
Thank you for voting!
Related Parts:
Ken
March 28, 2023
Refrigerator is not dispensing ice or water. Ice maker works OK, Once in a while after power outage all ice cubes are dispensed onto the floor when power comes back on.
For model number JCD2389DES
Hello Ken, thank you for contacting us. The issue appears to be due to the faulty dispenser control board. You may need to replace the control board, part number PS11743225, to fix your issue. We hope this helps.
Was this helpful?
Thank you for voting!
Related Parts:
- < Prev
- 1
- Next >
Related Parts
Model Cross Reference
This part works with the following models:
PartSelect Number: PS11743224
Manufacturer Part Number: WP61005274
Manufacturer Part Number: WP61005274
Brand
Model Number
Description