Rinse Aid Cap WP3378134

Official part for Whirlpool, Kenmore, Roper, Estate

★★★★★
★★★★★
(15)

Really Easy 

30 - 60 mins 

Install video
11741341-1-M-Whirlpool-WP3378134-Rinse Aid Cap
Part Location Diagram of WP3378134 Whirlpool Rinse Aid Cap
See part 13 in the diagram
Replacing your Whirlpool Dishwasher Rinse Aid Cap
( Grid squares measure 1x1 inch )
11741341-1-S-Whirlpool-WP3378134-Rinse Aid Cap 11741341-2-S-Whirlpool-WP3378134-Rinse Aid Cap 11741341-3-S-Whirlpool-WP3378134-Rinse Aid Cap Part Location Diagram of WP3378134 Whirlpool Rinse Aid Cap Replacing your Whirlpool Dishwasher Rinse Aid Cap
Proudly Canadian
OEM badge Official OEM Part
$15.35
In Stock
Order within the next 7 hrs and your part ships today!

Part Fit Check - Make Sure it's a Match.

Where to find your model number

About This Part

What it does. Why it matters. Everything you need to know for an easy fix.

Rinse Aid Cap Specifications

This cap does not require the use of a o-ring seal.
Part #WP3378134
Manufactured by Whirlpool for Whirlpool, Kenmore, Roper, Estate

You May Also Need

Because heroes deserve fewer surprise re-installs.

$26.85
Special Order
$34.95
In Stock
$29.95
In Stock
$35.15
In Stock
$35.95
In Stock
$35.15
In Stock

Genuine OEM: Original Parts. Lasting Repairs.

Because quality isn't optional.

OEM stands for Original Equipment Manufacturer. This means that the company who made your appliance is also supplying the replacement part.

How Buying OEM Parts Can Save You Time and Money
Features OEM Generic
Genuine brand name
Guaranteed to fit
Superior Quality
Long term value

Part Videos

Watch our pros, then fix it yourself.

Replacing your Whirlpool Dishwasher Rinse Aid Cap

Replacing your Whirlpool Dishwasher Rinse Aid Cap

About this fix

Common problems and models this part fixes.

Really Easy 

30 - 60 mins 

Rated by verified customers

What this part fixes:
  • Will not dispense detergent
  • Not cleaning dishes properly
  • Leaking
  • Not drying dishes properly
Works with the following products:
  • Dishwasher
Part# WP3378134 replaces these:
AP6008208, 3369155, 3369200, 3369512, 3378134

Customer Reviews

Real ratings from other people who bought this part.

Average Rating:

★★★★★
★★★★★
15 Reviews
5.0

Out of 5

  • 5 Stars
    15
  • 4 Stars
    0
  • 3 Stars
    0
  • 2 Stars
    0
  • 1 Star
    0

Search reviews left by others. DIY doesn't mean you have to do it alone. Use simple keywords like "fit", "broken", "easy", or "quality" to find reviews that match!

Search filter:
Clear Filter
Your search term must have 3 or more characters.
Sort by:
  • 1
  • 2
Sorry, we couldn't find any existing reviews that matched. Try using some different or simpler keywords.
★★★★★
★★★★★
Philip T - May 2, 2023
  Verified Purchase
Worked great
No problems, fast delivery
★★★★★
★★★★★
Annette K - February 15, 2022
  Verified Purchase
As expected
This website makes it so easy to keep our appliances going. Ordering this rinse aid cap was as simple as can be. Came in the condition we expected (brand new) and was delivered pronto. Like a few days! (We are in Alberta)
★★★★★
★★★★★
Louise B - May 13, 2024
  Verified Purchase
Received
Exactly what I wanted
★★★★★
★★★★★
Jack W - October 5, 2025
  Verified Purchase
Replace rinse solution cap
Perfect match for the one the heating element melted.
★★★★★
★★★★★
Kathy H - January 22, 2019
  Verified Purchase
Easy repair, worked like a charm
The part was exactly the correct one. Delivery was fast no hasstle. I have to remember not to tighten the rinse aid cap too much.
★★★★★
★★★★★
Matthew M - September 6, 2018
  Verified Purchase
Fast service
Part recieved two dsys after request. Thank you for msking it easy.
★★★★★
★★★★★
Khalid M - June 26, 2020
  Verified Purchase
Good part
Good part. Arrived in time. Worked as expected.
★★★★★
★★★★★
Micheal P - November 25, 2021
  Verified Purchase
Perfect part
Was told at several places part was to old not available. part in stock, fast shipping now working great
★★★★★
★★★★★
Carl G - April 16, 2020
  Verified Purchase
Excellent Replacement
Great customer service and super fast shipment! My dishwasher is in working order again. Thanks! Partselect is A+++ and highly recommended.
★★★★★
★★★★★
Marilou B - November 14, 2018
  Verified Purchase
Worked perfect
The part was just what I ordered. And works perfect.
  • 1
  • 2

Repair Tips

See how others fixed this model. Time, tools, difficulty, and steps that lead to victory!

Really Easy 

30 - 60 mins 

Average repair rating from 10 real customers like you

Sort by:
  • 1

Search repair tips from other customers using simple keywords like "replace", "fit", "remove", "inspect". DIY doesn't mean you have to do it alone!

Search filter:
Clear Filter
Your search term must have 3 or more characters.
Sorry, we couldn't find any existing installation instruction that matched.
Water dripped out from the bottom of door.
25 of 41 people found this instruction helpful.
  • Louis from Niceville, FL
  • A Bit Difficult
  • 30 - 60 mins
  • Screw drivers
Diagnosing the problem, i.e. finding the source of the leak, was the hardest part. The best clue was the leak only occurred well into the cycle when the water was hot and steam was coming out the vent. I then assumed there was a bad seal and steam & condensed water was leaking down into the door. I replaced the vent duct & seal, a broken drip cover (an internal part in the door), and replaced a missing rinse aid cap. This stopped the leak.
Read less
Was this helpful?
Thank you for voting!
soap lid missing
9 of 26 people found this instruction helpful.
  • Jim from Oktaha, OK
  • A Bit Difficult
  • 15 - 30 mins
  • Screw drivers
Replacing the pin with the spring is a little tricky, it was hard to hold it. And the little plastic pin breaks real easy too, its hard to get the lid to snap in place without breaking the pin.
Was this helpful?
Thank you for voting!
MY RINSE AID CAP WAS MISSING
3 of 3 people found this instruction helpful.
  • carol from BATESVILLE, IN
  • Easy
  • More than 2 hours
  • Screw drivers
I ORDERED THE PART THAT WAS EASY BUT WHILE THE MACHINE WAS USED FOR HOW LONG I DON'T KNOW WITH OUT THE CAP IT GOT FILLED WITH FOOD AND JUNK. FIRST THING I HAD TO DO WAS EXAMIN THE DOOR AS TO HOW I COULD CLEAN THIS THING OUT. I REMOVED 6 SCREWS THAT HELD THE DOOR TOGETHER AND PULLED EASY CAUSE I DIDN'T KNOW WHAT I WAS GETTING INTO. NO PROBLEM THERE WAS NO ELECTRIC PLUGS HOOKED TO THE DOOR. I TOOK IT OUT SIDE AND STARTED USING VINIGAR AND POURING IT INTO THE HOLE AND SHAKING THEN TRYING TO GET IT BACK OUT. WELL THERE IS ONLY ONE POSITION THAT WILL LET THE VINEGAR BACK OUT. I HAD TO HOLD IT SIDEWAYS THEN TILT FORWARD AND IT WOULD RUN OUT AND BRING SOME JUNK WITH IT. THIS WAS A TIME CONSUMING PROCESS BEING YOU COULD NOT SEE INSIDE TO KNOW HOW MUCH JUNK WAS IN THERE. JUST POUR AND DUMP. AND DON'T FOR GET TO SHAKE TO LOOSEN ANY THING LEFT INSIDE.LOL I WAS VERY PROUD OF MYSELF NOT KNOWING FOR SURE IF I FIXED IT OR NOT BUT I TOOK A SHOT I HAD. I DID SOME SCRUBBING AND DEGREASING ON THE UNDERSIDE OF THE BOTTOM OF THE DOOR BEFORE I REASSEMBLED IT. THAT WAS EASY AND I CROSSED MY FINGERS ANY WAY. I GOT OUT MY NEW PART AND THE JET DRY I BOUGHT AND STATED TO FILL THE DISPENSER AND IT TOOK HALF THE BOTTLE.YEA !!! I PUT THE CAP ON AND COULDN'T WAIT TO DO A LOAD OF DISHES. EVERY THING IS LOOKING GOOD NOW. THANK YOU PART SELECT FOR MAKING GETTING THE PARTS I NEEDED SO EASY AND SHOWING DIAGRAMS SO I HAD THE RIGHT PART. I COULDN'T HAVE DONE IT WITH OUT YOU.
Read less
Was this helpful?
Thank you for voting!
Cap was missing/lost.
2 of 2 people found this instruction helpful.
  • Jose from Coolidge, AZ
  • Very Easy
  • Less than 15 mins
Easy fix. It’s a screw on by hand piece.
Was this helpful?
Thank you for voting!
The hose that connected to the middle spray arm was worn and had deteriorated
2 of 2 people found this instruction helpful.
  • Denise from BRONX, NY
  • Really Easy
  • 30 - 60 mins
  • Screw drivers
Easily installed the hose and replaced the middle spray arm with the help of my brother the savior! Lol. It was very easy for him to install.
Was this helpful?
Thank you for voting!
Cap did not stay in the hole any longer.....was melted
2 of 6 people found this instruction helpful.
  • Debra from York, PA
  • Really Easy
  • Less than 15 mins
Just screwed the new cap in. This PartSelect was AWESOME. So easy. Lighting fast shipping !!!!
Was this helpful?
Thank you for voting!
Upper spray arm mount cracked and rinse aid cap broke
1 person found this instruction helpful.
  • Jeffrey from MEXICO, NY
  • Really Easy
  • Less than 15 mins
  • Screw drivers
Unlatch the rail clips on upper rack slides, slide rack off the rails. Flip rack upside down, use a philip screwdriver and remove screw that holds propeller to upper spray arm mount. Remove clamp of broken spray arm mount with philip screw driver. Replace with new upper spray arm mount (different design) and no tools needed. Just snap it in place where old one was. Put propeller over the spray arm mount and reuse screw with washer to tighten. Return rack back in the dishwasher and reattach the rail clips. For the rinse aid cap, the cap broke off. I used a nose plier to remove (unscrew) the remaining piece. Replace with new rinse aid cap. Dishwasher is running normal again.
Read less
Was this helpful?
Thank you for voting!
Lost the cap to the Rinse aid container in door
1 person found this instruction helpful.
  • Bruce W from WESTERLY, RI
  • Very Easy
  • Less than 15 mins
Ordered part, recieved part package, opened package, inserted screw cap rinse aid tank cover, twisted to close. Job completed. Time required about 15 seconds from opening package. Service was excellent and accurate. Thank you.
Was this helpful?
Thank you for voting!
Wash arm retainer nut snapped in half
0 of 5 people found this instruction helpful.
  • Melissa from The Colony, TX
  • Really Easy
  • Less than 15 mins
  • Pliers
First I pulled the top half of the broken retainer nut out of the lower wash arm assembly. Then I took the was arm assembly off, removed the other half of the screw, set the lower spray arm seal into the lower wash arm assembly and screwed the wash arm retainer nut back in. As a bonus, I decided to replace the broken Wet agent cap. Had to use needle nose pliers to unscrew the broken bottom stuck in the well... That was the toughest part and it wasn't critical to the dishwasher functioning.
Read less
Was this helpful?
Thank you for voting!
Replaced broken/worn parts
0 of 6 people found this instruction helpful.
  • Nicholas from Pleasanton, CA
  • Really Easy
  • Less than 15 mins
Simple replacement
Was this helpful?
Thank you for voting!
  • 1

DIY Questions and Expert Answers

Be the first to ask our experts a question about this part!

This Part Also Fits These Models

Don't see your model? Use our Fit Checker to confirm!

Check Part Fit
Part #WP3378134
Brand
Model Number
Description
Kenmore
110723120
Dishwasher
Kenmore
110773811
Dishwasher
Kenmore
110773812
Dishwasher
Kenmore
110773813
Dishwasher
Kenmore
110773881
Dishwasher
Kenmore
110773882
Dishwasher
Kenmore
110773883
Dishwasher
Kenmore
65715755791
Dishwasher - Kenmore Dishwasher Model 657.15755791 (65715755791, 657 15755791) Parts
Kenmore
66513402K900
Dishwasher
Kenmore
66513402K901
Dishwasher
Kenmore
66513409K900
Dishwasher
Kenmore
66513409K901
Dishwasher
Kenmore
66513442K900
Dishwasher
Kenmore
66513442K901
Dishwasher
Kenmore
66513443K900
Dishwasher
Kenmore
66513443K901
Dishwasher
Kenmore
66513444K900
Dishwasher
Kenmore
66513444K901
Dishwasher
Kenmore
66513449K900
Dishwasher
Kenmore
66513449K901
Dishwasher
Kenmore
66513492K600
Dishwasher
Kenmore
66513499K600
Dishwasher
Kenmore
66513592K600
Dishwasher
Kenmore
66513593K600
Dishwasher
Kenmore
66513594K600
Dishwasher
Kenmore
66513599K600
Dishwasher
Kenmore
66513692K600
Dishwasher
Kenmore
66513699K600
Dishwasher
Kenmore
66514212K900
Dishwasher
Kenmore
66514212K901
Dishwasher
Rinse Aid Cap
$15.35
In Stock
✖
Stock Status

In Stock

Item is in stock and is estimated to be delivered in 2-3 business days via Standard Shipping.

On Order

Item is not in stock and usually ships 3-5 business days from the time you place your order.

Special Order

Item is not in stock and usually ships 10-15 business days from the time you place your order.

NLA - No Longer Available

This item is no longer being made by the manufacturer, and cannot be added to your shopping cart.