Whirlpool WP31001535 - Motor Pulley | PartSelect.ca
Motor Pulley – Part Number: WP31001535
( Grid squares measure 1x1 inch )
Motor Pulley – Part Number: WP31001535 Motor Pulley – Part Number: WP31001535 https://partselectca.azureedge.net/Schematics/Maytag/35792.gif

Motor Pulley

Your Price

CAD$60.00

PartSelect Number PS11740721
Manufacturer Part Number WP31001535
Manufactured by Whirlpool

This is the replacement motor pulley for your dryer. The motor pulley transfers momentum from the drive motor to the drum via the drive belt. If the motor pulley cracks or is no longer staying on the drive shaft, you will need to replace it. You will need to access the dryer motor for this repair, by removing the front panel. The motor pulley is approximately 1 inch in diameter and is sold individually. This is an OEM part sourced directly from the manufacturer.

This part works with the following brands: Maytag, Magic Chef, Crosley, Admiral, Norge, Amana, Hoover.

This part works with the following products: Dryer.

This part fixes the following symptoms: Will not tumble

Questions & Answers
We're sorry, but our Q&A experts are temporarily unavailable.
Please check back later if you still haven't found the answer you need.
Sort by:
Keep searches simple. Use keywords, e.g. "leaking", "pump", "broken" or "fit".

Customer Repair Stories

Average Repair Rating: 3.9 / 5.0, 3 reviews What's this?
Sort by:
Keep searches simple. Use keywords, e.g. "leaking", "pump", "broken" or "fit".
Don from Elma, IA
Difficulty Level:
Easy
Total Repair Time:
30 - 60 mins
Tools:
Nutdriver, Pliers, Screw drivers, Wrench (Adjustable)
Parts Used:
W10410996, WP31001535, 35-4196, WP35-2045, W11497304
Dryer would'nt start / drum wouldn't turn
Unplugged Dryer; used screwdriver to push in and release two clips that hold top to front, tilted top back and removed two screws holding front to sides. Disconnected door switch and removed front .
Reached in above motor to remove belt from around pulley and tensioner wheel, Pulled drum and belt out of machine.
Removed approximately 10 screws around perimeter of blower housing and removed cover to access blower wheel. Removed outer lock ring from shaft and clamp from blower wheel hub, and removed blower wheel.
Took out tensioner assembly.
Disconnected wiring connector from motor.
Removed three screws that held blower housing to bottom and removed retainer around rubber motor mount at pulley end of motor. Lifted out motor, blower housing and vent pipe as one unit.
Removed 2nd outer lock ring from motor shaft.
Rotated motor frame 45 degrees to free the rubber mount from the blower housing.
Screwed new pulley onto new motor shaft and cleaned blower housing and vent pipe.
Assembly is reverse of disassembly.
Inspected and lightly greased the glides and inspected the idler wheels before reinstalling drum.

Dryer works perfectly.

Five to ten minutes also spent unscrewing and replacing timer knob and hinge pins on lid of matching washer Crosley cw22b5v.

Very simple repair.
52 of 77 people found this instruction helpful.
Was this instruction helpful to you?
Raul from cypress, CA
Difficulty Level:
Really Easy
Total Repair Time:
Less than 15 mins
Tools:
Screw drivers, Wrench (Adjustable)
Parts Used:
WP31001535, 341241
broken pulley and belt
Before anything else, I would like to thank your company for a quick response and fast delivery of the parts that I ordered. Ordering parts from your company saved me a lot of money. The repair took me about 15 min. First I removed the two screws that hold the front cover and then I pulled out the drum and replaced the broken pulley, then I put back the drum and the belt in place and then I put the cover and screwed back in and now I'm back washing and drying pile of clothes.
14 of 32 people found this instruction helpful.
Was this instruction helpful to you?
Tom from FIRTH, NE
Difficulty Level:
Really Easy
Total Repair Time:
30 - 60 mins
Tools:
Nutdriver, Pliers, Screw drivers, Socket set
Parts Used:
WP31001535
Drive pulley wore out
Item # PS11740721 motor drive pulley. This has a 3/8-24 reverse thread inner bore. Fit my Maytag model MDE508DAYW dryer made by Whirlpool, with drive motor on the lower right below the counterclockwise rotating drum and exhaust blower at the front of the machine. It might work with a number of brands of dryers made by Whirlpool with that configuration. Check the motor shaft thread and the drive belt which is a 5 rib belt 5/16ths inch or 8 mm wide. For Joe Blow the local appliance repair places only quote replacing the motor and pulley as a unit. At $170.
1 person found this instruction helpful.
Was this instruction helpful to you?
Customer Reviews
Average Rating:
1 Review
5
out of 5
Filter By Rating:
  • 5 Stars
    1
  • 4 Stars
    0
  • 3 Stars
    0
  • 2 Stars
    0
  • 1 Stars
    0
Sort by:
Keep searches simple. Use keywords, e.g. "leaking", "pump", "broken" or "fit".

Model Cross Reference

Brand
Model Number
Description
Admiral
ADE20L1A
Dryer - Residential
Admiral
ADE20L1H
Dryer - Residential
Admiral
ADE20L1W
Dryer - Residential
Admiral
ADE20N3V
Dryer - Residential
Admiral
ADE7000AYW
Dryer - Residential
Admiral
ADE9000AYW
Dryer - Residential
Admiral
ADG20N3V
Dryer - Residential
Admiral
ADG7000AWW
Dryer - Residential
Admiral
ADG9000AWW
Dryer - Residential
Admiral
AYE1000AYW
Dryer - Residential
Maytag
AYE1200AKW
Dryer
Admiral
AYE2250AYA
Dryer - Residential
Admiral
AYE2250AYW
Dryer - Residential
Admiral
AYG1000AWW
Dryer - Residential
Admiral
AYG1200AWA
Dryer - Residential
Admiral
AYG1200AWW
Dryer - Residential
Crosley
CDE22B6M
Dryer - Residential
Crosley
CDE22B6V
Dryer - Residential
Crosley
CDE22B8VC
Dryer - Residential
Crosley
CDE6000A
Dryer - Residential
Crosley
CDE6000AZW
Dryer - Residential
Crosley
CDE6000Q
Dryer - Residential
Crosley
CDE6000W
Dryer - Residential
Crosley
CDE6500AZW
Dryer - Residential
Crosley
CDE6500Q
Dryer - Residential
Crosley
CDE6500W
Dryer - Residential
Crosley
CDE7000W
Dryer - Residential
Crosley
CDE7500AZW
Dryer - Residential
Crosley
CDE7500Q
Dryer - Residential
Crosley
CDE7500W
Dryer - Residential