This part is located at the bottom of the ice bucket.
How Buying OEM Parts Can Save You Time and Money
Part Videos
Replacing your Kenmore Refrigerator Ice Bin Coupling
Troubleshooting
This part fixes the following symptoms:
Ice maker won’t dispense ice | Ice maker not making ice
This part works with the following products:
Refrigerator.
This part works with the following products:
Kenmore, KitchenAid, Whirlpool, Maytag.
Part# WP2220457 replaces these:
AP6006686, 2198604, 2220457
Customer Reviews
Average Rating:
★★★★★
★★★★★
4 Reviews
5.0
Filter By Rating:
5 Stars
4
4 Stars
0
3 Stars
0
2 Stars
0
1 Star
0
< Prev
1
Next >
Sort by:
Search filter:
Clear Filter
Your search term must have 3 or more characters.
Keep searches simple. Use keywords, e.g. "leaking", "pump", "broken" or "fit".
Sorry, we couldn't find any existing reviews that matched. Try using some different or simpler keywords.
★★★★★
★★★★★
Jean-Noel B - March 3, 2024
Verified Purchase
Great service
The right part arrived promptly and my appliance is back in working order.
★★★★★
★★★★★
Veronica H - January 28, 2021
Verified Purchase
Quality part
Very happy the shipping was fast and the quality of my Ice Bin Coupling is excellent. I’m able to dispense ice again. The new part I received is of better quality from the original part I received with the fridge. I have saved Part Select on my home page just in case I might need them in the future. ?????????? All the way.
★★★★★
★★★★★
Stan W - February 12, 2020
Verified Purchase
Right part, right price, and quick shipping
Right part, right price, and quick shipping
★★★★★
★★★★★
David L - August 7, 2018
Verified Purchase
Super easy repair
got the part and had it installed in less than 5 minutes. just needed a Phillips screw driver.
< Prev
1
Next >
Customer Repair Stories
Average Repair Rating: 4.7 / 5.0, 31 reviews.
What's this?
< Prev
1
2
3
Next >
Sort by:
Search filter:
Clear Filter
Your search term must have 3 or more characters.
Keep searches simple. Use keywords, e.g. "leaking", "pump", "broken" or "fit".
Sorry, we couldn't find any existing installation instruction that matched.
The bin coupler broke in half
When I inspected the ice bin I noticed the bin coupler was in half. So I ordered the part. I removed the screw that held in the old part. I saved the two washers. Simply following the diagram on the website made reassembly a piece of cake. It is obvious which piece is the coupling as only it can fit the other coupling. I put the screw back in and it was done.
Remove ice maker from freezer, place on its side on table. Remove single screw securing coupling from shaft without removing shaft from housing. Remove old coupling, and attach new coupling using single screw.
This is a great time to completely clean the Ice maker bin and crusher unit.
Other Parts Used:
Stephen from Oregon City, OR
Difficulty Level:
Easy
Total Repair Time:
15 - 30 mins
Tools:
Screw drivers
10 of 11 peoplefound this instruction helpful.
Was this instruction helpful to you?
Thank you for voting!
Ice maker gear broke into pieces
It was the right part at the right time. I had ordered parts through the retailer from Whirlpool but they were not right. I found the part number on the Whirlpool website and ordered it from you. Once it came it was a thirty second fix. Thanks.
J. Keith Miller
Other Parts Used:
Joseph Keith from High Point, NC
Difficulty Level:
Really Easy
Total Repair Time:
Less than 15 mins
Tools:
Screw drivers
7 of 7 peoplefound this instruction helpful.
Was this instruction helpful to you?
Thank you for voting!
Broken ice bin coupling
Online parts detail made identifiying the correct part very easy. $10 fix instead of a $150 service call. Once the right part was identified, fixing it was very easy.
Other Parts Used:
Bradley from Woodstock, MD
Difficulty Level:
Really Easy
Total Repair Time:
Less than 15 mins
7 of 11 peoplefound this instruction helpful.
Was this instruction helpful to you?
Thank you for voting!
broken part
this site is invaluable - we searched and came upon it and the schematics for the model of fridge we have allowed us to identify exactly the part that we needed to replace. It was terrific - great site.
Other Parts Used:
Steve from San Jose, CA
Difficulty Level:
Easy
Total Repair Time:
Less than 15 mins
3 of 4 peoplefound this instruction helpful.
Was this instruction helpful to you?
Thank you for voting!
Ice would not exit the ice bin
It was so easy. I had no idea. My husband and I were directed to your site and we ordered the part with scepticism but with hope that it would solve the problem. As soon as it came in, my husband installed it in five minutes. It was working immediately. Thank you.
Other Parts Used:
Lourdes from Pembroke Pines, FL
Difficulty Level:
Really Easy
Total Repair Time:
Less than 15 mins
Tools:
Pliers
3 of 4 peoplefound this instruction helpful.
Was this instruction helpful to you?
Thank you for voting!
ice wouldn't come out
1. Tried to unscrew the bolt that held the broken coupling. 2. Had to have daughter hold on the plastic spinner on the other side so that the bolt would unscrew and not make the whole mechanism spin. 3. Screw came out. 4. Put coupling in place. 5. Put screw back in and tightened everything up. Really easy, once the screw actually began coming out.
Other Parts Used:
glen from Eugene, OR
Difficulty Level:
Easy
Total Repair Time:
Less than 15 mins
Tools:
Screw drivers, Socket set
3 of 4 peoplefound this instruction helpful.
Was this instruction helpful to you?
Thank you for voting!
In the door ice maker coupling was broken, therefore, it would not dispense ice.
Ordered the parts, three days later they arrived. Put the coupling and the washer in place and screwed the dispenser back in place. Oh yeah, also installed the new filter that I ordered. Piece of cake.
The only real difficultly I had replacing the ice door was getting the exterior trim off the freezer door. You have to push down on the bottom of the trim to release the tabs that hold it in place. After removal of the trim, the rest of the repair is pretty straight forward. The ice door kit solved the problem!
Other Parts Used:
Gary from Austin, TX
Difficulty Level:
A Bit Difficult
Total Repair Time:
15 - 30 mins
Tools:
Nutdriver, Pliers, Screw drivers
3 of 6 peoplefound this instruction helpful.
Was this instruction helpful to you?
Thank you for voting!
< Prev
1
2
3
Next >
Questions and Answers
Ask our experts a question about this part and we'll get back to you as soon as possible!
4 questions answered by our experts.
< Prev
1
Next >
Sort by:
Search filter:
Clear Filter
Your search term must have 3 or more characters.
Keep searches simple. Use keywords, e.g. "leaking", "pump", "broken" or "fit".
Sorry, we couldn't find any existing answers that matched.Try using some different or simpler keywords, or submit your new question by using the "Ask a Question" button above!
Shery
September 17, 2017
My refrigerator is not dispensing ice. It's making ice, just not dispensing. When I press the pad on the door to dispense the ice, I can hear the motor running but nothing is coming out...crushed or cube. no ice is stuck anywhere. is the coupling the problem? it does not look to be broken (haven't taken it out.)
For model number GS6NBEXRS00
Hi Shery,
Thank you for the question. I suggest removing the bin and maybe taking it apart to see if there is something broken inside. It sounds like the Auger may not be turning and pushing the ice out. Check to make sure the auger is secure and if so try looking inside the ice bin to see if anything broke or became lose.
Hope this helps!
6 people found this helpful.
Was this helpful?
Thank you for voting!
Charles
September 18, 2019
Makes ice but will not dispense ice with ice falpper
For model number ED2FHAXSBOO
Hello Charles, thank you for writing. This could be due to a faulty Ice Door, part number PS11723180 for your model. You may also want to consider this Ice Bin Coupling, part number PS11739762 as the cause. Good luck with your repair!
2 people found this helpful.
Was this helpful?
Thank you for voting!
Tim
August 19, 2019
The plastic gear on the bottom of the removeable bucket that couples with the metal coupling is worn out...where do if find this part?
Hello Tim, thank you for contacting us, In order for us to locate the correct parts and repair information we will require the model number of the unit. Once you have located the model number please feel free to resubmit the question and we will be happy to help you. Look forward to hearing from you!
1 person found this helpful.
Was this helpful?
Thank you for voting!
James
April 14, 2023
My refrigerator is not dispensing ice. The ice maker is making ice and when I hit the dispenser, the light and door opens, but no motor noise. Checked motor and it is good, but will not come on. Is there a fuse for this?
For model number GSF26C4EXY00
Hello James, thank you for contacting us. We suggest you check the wire harness for the motor. Make sure the sire connectors are not damaged and are firmly connected. If the wire harness is okay, you may need to replace the ice level control board, part number PS11769410. We hope this helps.
