Part Location Diagram of WP22003989 Whirlpool Timer Cap
See part 11 in the diagram
( Grid squares measure 1x1 inch )
Customer Service Representative

Get in touch, we're here to help!

Daily 8am - 9pm EST

customerservice@partselect.ca

Timer Cap

$55.27
  In Stock

Get this part fast! Average delivery time for in-stock parts via standard shipping: 1.8 days.

PartSelect Number PS11739485
Manufacturer Part Number WP22003989
Manufactured by Whirlpool
Product Description

Timer Cap Specifications

This timer cap is chrome in color.
How Buying OEM Parts Can Save You Time and Money

How Buying OEM Parts Can Save You Time and Money

Troubleshooting
This part works with the following products:
Washer, Dryer.
This part works with the following products:
Maytag.
Part# WP22003989 replaces these:
22003989, 22003990
Back to Top
Customer Repair Stories
 Average Repair Rating: 4.1 / 5.0, 10 reviews. What's this?
  • 1
Sort by:
Sorry, we couldn't find any existing installation instruction that matched.
Knob pulled off and I had been turning it on with pliers
removed the 3 screws holding the front cover on to the timer, unsnapped the timer, unpluged it and plugged in the new one then snapped it back in place. put the front cover back and placed the timer cap back on it works like new now and saved me $140 dollars. Very happy to not look like I am trying to extract a tooth when turning on the dryer
Other Parts Used:
Timer
  • Nancy from Seminole, FL
  • Difficulty Level:
    Really Easy
  • Total Repair Time:
    Less than 15 mins
  • Tools:
    Screw drivers
12 of 14 people found this instruction helpful.
Was this instruction helpful to you?
Thank you for voting!
Drying timer won't advance
Remove the timer control knob cap with a small flat head screw driver on either side of the cap, between the cap and the rubber ring (this took a while to figure out, but it's easy once you do) then remove the knob. Remove 3 T15 hex screws on top of control panel, tilt top of panel toward you and lift up. Remove the electrical connector (this was difficult, you have to release the lock and rock the connector at the same time). Push down on the locking tabs at the feet of the timer assembly and slide to remove. Reverse these directions to install new timer. Unfortunately this did not fix my problem because the timer still won't advance. I'm replacing the sensor assembly next. I'll let you know if that works.
Other Parts Used:
Timer
  • Albert from Alger, MI
  • Difficulty Level:
    A Bit Difficult
  • Total Repair Time:
    30 - 60 mins
  • Tools:
    Screw drivers
10 of 14 people found this instruction helpful.
Was this instruction helpful to you?
Thank you for voting!
Broken Plastic twirl knob shaft on timer assembly and chrome timer cap
0. Disconnected the dryer power supply
1. Removed the control panel (3 screws, star bit)
2. Detached the electric power supply cords from the timer assembly (took a bit of easing back and forth - do not pull by the electric cords, pull the socket itself)
3. Timer assembly eased off subsequently (held in place by three unscrewed receptacles)
4. Installed the new timer assembly, plugged back the supply cords, and installed the new timer knob, skirt and chrome cap.

They don't build Maytag equipment as they used to. We bought a fridge, washer and dryer 6 years ago - all three of them have had component, part stress and/or electronic sensor failures :-(
Other Parts Used:
Timer Timer Dial Skirt Timer Knob - light gray and white
  • Sudeepto from San Diego, CA
  • Difficulty Level:
    Easy
  • Total Repair Time:
    Less than 15 mins
  • Tools:
    Screw drivers
9 of 17 people found this instruction helpful.
Was this instruction helpful to you?
Thank you for voting!
Knob broke off dryer timer
The two parts purchased were the corrects parts needed to do the job. (There's always a first time for everything!) When the plastic timer knob broke away from the timer stem, it left the silver timer cap's locking pin embedded in the timer stem. I could not remove the broken remains of the knob while the broken off pin was still in place. And it was impossible to grip the pin with pliers or tweezers without damaging the timer stem. As a solution I grabbed my whole-house vacuum cleaner hose and sucked the broken pin out of the timer stem. Total time of repair was about 20 minutes not including the two-hour brainstorming time-out that led me to the vacuum cleaner solution.
Other Parts Used:
Timer Knob - light gray and white
  • John from Sterling Heights, MI
  • Difficulty Level:
    A Bit Difficult
  • Total Repair Time:
    15 - 30 mins
  • Tools:
    Pliers, Screw drivers
5 of 9 people found this instruction helpful.
Was this instruction helpful to you?
Thank you for voting!
Timer Knob was broken so the knob would not stay on
I removed the silver cap and then removed the knob itself. I replaced the knob with the new part and also the silver cap with the part. The job was complete.
Other Parts Used:
Timer Knob - light gray and white
  • Andrew from Beaver Falls, PA
  • Difficulty Level:
    Really Easy
  • Total Repair Time:
    15 - 30 mins
  • Tools:
    Pliers, Screw drivers
3 of 5 people found this instruction helpful.
Was this instruction helpful to you?
Thank you for voting!
dryer would not run=bad timer
simply replaced the timer.thank you for perfect service
Other Parts Used:
Timer Dial Skirt Timer Knob - light gray and white
  • Bobby from Ridgely, TN
  • Difficulty Level:
    Really Easy
  • Total Repair Time:
    15 - 30 mins
  • Tools:
    Nutdriver, Screw drivers
2 of 4 people found this instruction helpful.
Was this instruction helpful to you?
Thank you for voting!
Timer and timer knob were broken.
Watched video from on YouTube. Disasembled dryer by removing cap from timer knob. Pulling timer knob off the shaft. Removed three # 15 torx screws from the top of the dryer. Top panel rolled forward. Depressed plastic tab removed timer and unplugged wiring harness. Ordered parts from this site online. Parts arrived in 2 to 3 days. Parts were installed following reverse order from above.
Other Parts Used:
  • Randy from CONNEAUT, OH
  • Difficulty Level:
    Really Easy
  • Total Repair Time:
    30 - 60 mins
  • Tools:
    Nutdriver
2 of 2 people found this instruction helpful.
Was this instruction helpful to you?
Thank you for voting!
Dryer Timer has broken gears.
My dryer timer's internal gears were broken. Timer Cap also was broken. I opened the front face plate by removing the three screws on top and disconnecting the wiring harness. Took me 10 minutes to replace. I do very very little shopping online, I am VERY impressed with the availability of parts from partselect and am also impressed with the shipping turnaround. I thought I needed a timer knob but then realized I didn't need it and canceled the order, and I was refunded in two days. I am so happy with the way the process went I wish partselect dealt with other products besides appliances.
Other Parts Used:
Timer
  • Ra from Saugus, MA
  • Difficulty Level:
    Easy
  • Total Repair Time:
    15 - 30 mins
  • Tools:
    Screw drivers
2 of 2 people found this instruction helpful.
Was this instruction helpful to you?
Thank you for voting!
Time Cap broke away from Timer
Removed Screws on panel, pluged new timer into wire replace panel, but on new knob and cap and it was ready to go.
Other Parts Used:
Timer Timer Knob - light gray and white
  • Nancy from Fairfield, NJ
  • Difficulty Level:
    Really Easy
  • Total Repair Time:
    Less than 15 mins
  • Tools:
    Screw drivers
1 of 5 people found this instruction helpful.
Was this instruction helpful to you?
Thank you for voting!
cap broke
pop cap on knob
Other Parts Used:
  • james from wilmington, NC
  • Difficulty Level:
    Really Easy
  • Total Repair Time:
    Less than 15 mins
0 of 1 people found this instruction helpful.
Was this instruction helpful to you?
Thank you for voting!
  • 1
Questions and Answers

Ask our experts a question about this part and we'll get back to you as soon as possible!

2 questions answered by our experts.
  • 1
Sort by:
Sorry, we couldn't find any existing answers that matched.Try using some different or simpler keywords, or submit your new question by using the "Ask a Question" button above!
Dennis
June 19, 2019
Dryer pull knob to start has to be jiggled to get started.
For model number MDE7400AYQ
PartSelect logo
Hello Dennis, thank you for writing. For this you will want to consider either the Timer Knob part PS11739482 or the Timer part PS11741133 for your model. We hope this helps.

1 person found this helpful.

Was this helpful?
Thank you for voting!
Masood
November 18, 2019
My washer does not start. When I turn the knob and pull to start it, there is no action. When I move the knob to the spin position, the spinner moves and complete its cycle. Can you please help to identify the problem. Thanks.
For model number MAV9501EWW
PartSelect logo
Hi Masood, Thank you for your question. If the washer will not start, it sounds like the issue is with either the timer or the knob. There are some parts that you will need to check as well to see which one is causing the issue. Here is a link from our website that you may reference on what parts to check, https://www.partselect.com/AdvancedModelSymptoms.aspx?ModelNum=MAV9501EWW&mfgModelNum=&fkMfgID=1&ModelMasterID=142305&PID=40. I hope this helps. Thank you and have a great day!

Was this helpful?
Thank you for voting!
  • 1
Related Parts
Model Cross Reference
This part works with the following models:
PartSelect Number: PS11739485
Manufacturer Part Number: WP22003989
Brand
Model Number
Description
Maytag
MAV6260AWW
Washer - Residential
Maytag
MAV6451AGW
Washer - Residential
Maytag
MAV6451AWQ
Washer - Residential
Maytag
MAV6451AWW
Washer - Residential
Maytag
MAV6457AWW
Washer - Residential
Maytag
MAV6458AWW
Washer - Residential
Maytag
MAV6548AWQ
Washer - Residential
Maytag
MAV6548AWW
Washer - Residential
Maytag
MAV6601AWQ
Washer - Residential
Maytag
MAV6601AWW
Washer - Residential
Maytag
MAV7260AWW
Washer - Residential
Maytag
MAV7260BWW
Washer - Residential
Maytag
MAV7501EWW
Washer - Residential
Maytag
MAV7504EWW
Washer - Residential
Maytag
MAV7551AWQ
Washer - Residential
Maytag
MAV7551AWW
Washer - Residential
Maytag
MAV7557EWQ
Washer - Residential
Maytag
MAV7557EWW
Washer - Residential
Maytag
MAV7657EWQ
Washer - Residential
Maytag
MAV7657EWW
Washer - Residential
Maytag
MAV8260AWQ
Washer - Residential
Maytag
MAV8260AWW
Washer - Residential
Maytag
MAV8551AWQ
Washer - Residential
Maytag
MAV8551AWW
Washer - Residential
Maytag
MAV8557AWQ
Washer - Residential
Maytag
MAV8557AWW
Washer - Residential
Maytag
MAV8601AWQ
Washer - Residential
Maytag
MAV8601AWW
Washer - Residential
Maytag
MAV9501EWQ
Washer - Residential
Maytag
MAV9501EWW
Washer - Residential
Customer Service Representative

Get in touch, we're here to help!

Daily 8am - 9pm EST

Contact Customer Service