Lower Fill Injector WP22001186

Official part for Maytag, International, Jenn-Air

★★★★★
★★★★★
(1)

Easy 

30 - 60 mins 

11739270-1-M-Whirlpool-WP22001186-Lower Fill Injector
Part Location Diagram of WP22001186 Whirlpool Lower Fill Injector
See part 22 in the diagram
( Grid squares measure 1x1 inch )
11739270-1-S-Whirlpool-WP22001186-Lower Fill Injector 11739270-2-S-Whirlpool-WP22001186-Lower Fill Injector 11739270-3-S-Whirlpool-WP22001186-Lower Fill Injector Part Location Diagram of WP22001186 Whirlpool Lower Fill Injector
Proudly Canadian
OEM badge Official OEM Part
$75.22
In Stock

Part Fit Check - Make Sure it's a Match.

Where to find your model number

About This Part

What it does. Why it matters. Everything you need to know for an easy fix.

Lower Fill Injector Specifications

This lower fill injector is just over five inches long. It is white, made of plastic and is used on some washing machines.
Part #WP22001186
Manufactured by Whirlpool for Maytag, International, Jenn-Air

You May Also Need

Because heroes deserve fewer surprise re-installs.

$58.95
Special Order
$26.85
Special Order
$34.95
In Stock
$29.95
In Stock
$35.15
In Stock
$35.95
In Stock
$35.15
In Stock

Genuine OEM: Original Parts. Lasting Repairs.

Because quality isn't optional.

OEM stands for Original Equipment Manufacturer. This means that the company who made your appliance is also supplying the replacement part.

How Buying OEM Parts Can Save You Time and Money
Features OEM Generic
Genuine brand name
Guaranteed to fit
Superior Quality
Long term value

About this fix

Common problems and models this part fixes.

Easy 

30 - 60 mins 

Rated by verified customers

What this part fixes:
  • Leaking
Works with the following products:
  • Washer
  • Washer Dryer Combo
Part# WP22001186 replaces these:
AP6006204, 22001186

Customer Reviews

Real ratings from other people who bought this part.

Average Rating:

★★★★★
★★★★★
1 Review
5.0

Out of 5

  • 5 Stars
    1
  • 4 Stars
    0
  • 3 Stars
    0
  • 2 Stars
    0
  • 1 Star
    0

Search reviews left by others. DIY doesn't mean you have to do it alone. Use simple keywords like "fit", "broken", "easy", or "quality" to find reviews that match!

Search filter:
Clear Filter
Your search term must have 3 or more characters.
Sort by:
  • 1
Sorry, we couldn't find any existing reviews that matched. Try using some different or simpler keywords.
★★★★★
★★★★★
Bill L - July 31, 2021
  Verified Purchase
Great Part
Part came in quickly and fit perfectly
  • 1

Repair Tips

See how others fixed this model. Time, tools, difficulty, and steps that lead to victory!

Easy 

30 - 60 mins 

Average repair rating from 8 real customers like you

Sort by:
  • 1

Search repair tips from other customers using simple keywords like "replace", "fit", "remove", "inspect". DIY doesn't mean you have to do it alone!

Search filter:
Clear Filter
Your search term must have 3 or more characters.
Sorry, we couldn't find any existing installation instruction that matched.
Plastic thing (Fill Injector) that puts water in the washer broke
19 of 20 people found this instruction helpful.
  • AMY from Mount Kisco, NY
  • Easy
  • 30 - 60 mins
  • Pliers, Socket set
Unfortunately, I couldn't find instructions for removing the top for exactly this model. First step was to remove the front panel by removing the two lower screws, grabbing the bottom of the panel, and lifting up until the clips on top of the panel let go. Next was removing from underneath the two screws towards the front that held the top of the washer on. This gives you easy access to the Fill Injector, but if working alone you'll need something to prop up the front of the top lid while you work on it. There is one screw that hold on the Fill Injector assembly (top and bottom). This screw is removed from the top, via the control panel. To get inside the control panel you need to remove the back of the control panel (very easy), just unscrew the 5 screws on the back of it. Then remove the one screw that holds the Fill Injector assembly in place. From under the front panel, use your pliers to remove the hose clamp and then remove the Fill Injector from the hose. ONE IMPORTANT ITEM, YOU'LL DEFINITELY NEED A REPLACEMENT HOSE CLAMP. The one you remove to take off the old, broken fill injector cannot be put back on. Put the new clamp loosely on the hose, then connect the hose to the new Fill Injector Assembly. Put the Fill Injector Assembly in place and use a piece of duct tape to hold it there. Then reinstall the screw that holds it in place from the top, inside the control panel. Reinstall everything in reverse, give it a test and then have a beer. You've just "given it to the man" and saved yourself $100+ on a repair bill.
Read less
Was this helpful?
Thank you for voting!
leaking water under back left of washer
15 of 21 people found this instruction helpful.
  • Gregory from Louisville, KY
  • Really Easy
  • 30 - 60 mins
  • Nutdriver, Pliers, Screw drivers
The first thing I did was look at the diagrams for my specific appliance on the parts select web site to locate fastners. I removed the front panel(2 screws 4" from floor on front panel), then removed the corner bolts of top panel(found under in front). Next I removed the 4 screws on the control panel (on top). I located the screw holdling the fill injector to the top Lid. Then I removed the clamp holding the unit to the regulator. Assembled the unit and placed it in position. First attaching the fill injector to top panel, then clamping the hose to regulator, then replacing 4 screws in control panel. Next the two corner screws in corners under the top panel. Replaced front panel and 2 screws. Then had a trail run and no water leaks any where.
Read less
Was this helpful?
Thank you for voting!
Upper and lower filler injectors broken
6 of 7 people found this instruction helpful.
  • Henry from Southside, AL
  • Really Easy
  • 15 - 30 mins
  • Screw drivers, Socket set
Power cord out, of course.Popped off the front panel, swinging bottom outward. Wedge shaped protrusions on top of front panel work as a hinge until the bottom is swung out and the entire front lowered. Unscrewed the top--one screw in each front corner accessed from the front opening (removed panel). Panel behind control panel must be removed (5 hex head screws). Tilted front of top up revealing broken injector. Retaining screw for injector accessible from behind control panel loosened and broken injector assembly removed. New (easily assembled--snap together) injector slid into holding slot on one side and screwed down with previously removed hex screw. Reassemble in reverse.
Read less
Was this helpful?
Thank you for voting!
Upper and Lower Fill Injector snapped off and water was leaking out of the back of the machine
5 of 9 people found this instruction helpful.
  • Daryl from Newton, NJ
  • Easy
  • 15 - 30 mins
  • Screw drivers, Socket set
I looked at the machine diagram on the website and removed the screw on the bottom and lifted up the from panel which allowed me to have easier access to the fill injector. Then I removed the back panel off of the control panel on the top of the machine and removed the screw that held the fill injector in place, attached the new fill injector using the hose clamp I ordered with the part ( you need a new hose clamp because the other one is useless after you remove the old injector). Tightend up the screw to hold the injector in place and replaced the back panel and front panel. It was an easy repair and only cost $28.00 with shipping. I easily saved $150.
Read less
Was this helpful?
Thank you for voting!
Overloaded my washer and broke the water-injector!
4 of 6 people found this instruction helpful.
  • Richard from Coudersport, PA
  • Easy
  • 30 - 60 mins
  • Nutdriver, Screw drivers
Had to look up how to pop the front panel off the washing machine - that was the hardest part. Once that was off, the top unbolted and the cover came off the back of the control panel with a few screws. Tilting the washer-top back, I was able to clip the new upper and lower injector (attached to each other in advance) to the washing machine. Then I realized that I needed to clamp the water line to the injector FIRST - so I found a small screw clamp and attached the water line. One screw and one plastic tab hold the injector in place. Everything went back together fine and worked great! Maytag washer keeps on truckin for another ten years!
Read less
Was this helpful?
Thank you for voting!
Fill Injector Broke - A mouse may have contributed
1 person found this instruction helpful.
  • Todd from Evansville, WI
  • Easy
  • 30 - 60 mins
  • Nutdriver, Screw drivers, Socket set
I opend up the housing, found the broken part, ordered it, installed it, and had the washer working within 4 days of the initial break down.
Saved a lot of money over a service call, as well as time, and trips to the laundramat.
Was this helpful?
Thank you for voting!
Timer not functioning properly
1 of 2 people found this instruction helpful.
  • Jim from The Woodlands, TX
  • Easy
  • 30 - 60 mins
  • Nutdriver, Screw drivers
Turned power off, unscrewed back panel with nut driver, disconnected wiring harness and removed old timer and replaced. Reversed process.
Was this helpful?
Thank you for voting!
Plastic Fill injector broke. Water was leaking.
1 of 2 people found this instruction helpful.
  • Jason from Palm Harbor, FL
  • Easy
  • 30 - 60 mins
  • Pliers, Screw drivers, Socket set
Used the Butter knife to push in the clips on the front panel of the washing machine. Remove the two screws from the top. Remove the metal plate on the back. Lifted up the top and unscrewed the old Fill Injector and removed hose. Connected new Fill Injector to hose with new hose clamp. Attached Fill injector with screw to top of washer lid. Replaced all screws. Checked for leaks. Good to go!
Read less
Was this helpful?
Thank you for voting!
  • 1

DIY Questions and Expert Answers

Be the first to ask our experts a question about this part!

This Part Also Fits These Models

Don't see your model? Use our Fit Checker to confirm!

Check Part Fit
Part #WP22001186
Brand
Model Number
Description
Maytag
6329
Washer - MAYTAG AUTOMATIC WASHER
Maytag
6349
Washer - MAYTAG AUTOMATIC WASHER
Maytag
6359
Washer - MAYTAG AUTOMATIC WASHER
Maytag
LAT1916AAE
Washer - Residential
Maytag
LAT1916ABE
Washer - Residential
Maytag
LAT2200AAE
Washer - Residential
Maytag
LAT2300AAE
Washer - Residential
Maytag
LAT2300AWW
Washer - Residential
Maytag
LAT2500AAE
Washer - Residential
Maytag
LAT2914AAE
Washer - Residential
Maytag
LAT2914AAL
Washer - Residential
Maytag
LAT2914AAM
Washer - Residential
Maytag
LAT2915AAE
Washer - Residential
Maytag
LAT2915AAM
Washer - Residential
Maytag
LAT2916AAE
Washer - Residential
Maytag
LAT2916AAM
Washer - Residential
Maytag
LAT2916ABE
Washer - Residential
Maytag
LAT3500AAE
Washer - Residential
Maytag
LAT3500AAQ
Washer - Residential
Maytag
LAT3914AAE
Washer - Residential
Maytag
LAT3914AAL
Washer - Residential
Maytag
LAT3914AAM
Washer - Residential
Maytag
LAT4000AAW
Washer - Residential
Maytag
LAT4914AAE
Washer - Residential
Maytag
LAT4914AAL
Washer - Residential
Maytag
LAT4914AAM
Washer - Residential
Maytag
LAT4915AAE
Washer - Residential
Maytag
LAT4915AAM
Washer - Residential
Maytag
LAT4916AAE
Washer - Residential
Maytag
LAT4916AAM
Washer - Residential
Lower Fill Injector
$75.22
In Stock
✖
Stock Status

In Stock

Item is in stock and is estimated to be delivered in 2-3 business days via Standard Shipping.

On Order

Item is not in stock and usually ships 3-5 business days from the time you place your order.

Special Order

Item is not in stock and usually ships 10-15 business days from the time you place your order.

NLA - No Longer Available

This item is no longer being made by the manufacturer, and cannot be added to your shopping cart.