Timer WP208292

Official part for Maytag

★★★★★
★★★★★
(1)

Easy 

Less than 15 mins 

11738800-1-M-Whirlpool-WP208292-Timer
Part Location Diagram of WP208292 Whirlpool Timer
See part 17 in the diagram
( Grid squares measure 1x1 inch )
11738800-1-S-Whirlpool-WP208292-Timer 11738800-2-S-Whirlpool-WP208292-Timer 11738800-3-S-Whirlpool-WP208292-Timer Part Location Diagram of WP208292 Whirlpool Timer
Proudly Canadian
OEM badge Official OEM Part
$608.41
Special Order

Part Fit Check - Make Sure it's a Match.

Where to find your model number

About This Part

What it does. Why it matters. Everything you need to know for an easy fix.

Timer Specifications

The timer controls most of the operations of the washer: water level, tub filling and emptying, length of cycles, and cycle setting sequences.
Part #WP208292
Manufactured by Whirlpool for Maytag

You May Also Need

Because heroes deserve fewer surprise re-installs.

$26.85
Special Order
$34.95
In Stock
$29.95
In Stock
$35.15
In Stock
$35.95
In Stock
$35.15
In Stock

Genuine OEM: Original Parts. Lasting Repairs.

Because quality isn't optional.

OEM stands for Original Equipment Manufacturer. This means that the company who made your appliance is also supplying the replacement part.

How Buying OEM Parts Can Save You Time and Money
Features OEM Generic
Genuine brand name
Guaranteed to fit
Superior Quality
Long term value

About this fix

Common problems and models this part fixes.

Easy 

Less than 15 mins 

Rated by verified customers

Works with the following products:
  • Washer
Part# WP208292 replaces these:
2-8292, 208292

Customer Reviews

Real ratings from other people who bought this part.

Average Rating:

★★★★★
★★★★★
1 Review
5.0

Out of 5

  • 5 Stars
    1
  • 4 Stars
    0
  • 3 Stars
    0
  • 2 Stars
    0
  • 1 Star
    0

Search reviews left by others. DIY doesn't mean you have to do it alone. Use simple keywords like "fit", "broken", "easy", or "quality" to find reviews that match!

Search filter:
Clear Filter
Your search term must have 3 or more characters.
Sort by:
  • 1
Sorry, we couldn't find any existing reviews that matched. Try using some different or simpler keywords.
★★★★★
★★★★★
Penny P - October 29, 2020
  Verified Purchase
Good Part
Great and easy fix for my washing machine. Hopefully keeps my machine running for another 26 years.
  • 1

Repair Tips

See how others fixed this model. Time, tools, difficulty, and steps that lead to victory!

Easy 

Less than 15 mins 

Average repair rating from 3 real customers like you

Sort by:
  • 1

Search repair tips from other customers using simple keywords like "replace", "fit", "remove", "inspect". DIY doesn't mean you have to do it alone!

Search filter:
Clear Filter
Your search term must have 3 or more characters.
Sorry, we couldn't find any existing installation instruction that matched.
Spin cycle would not work leaving clothes wet.
9 of 9 people found this instruction helpful.
  • Greg from Charlotte, NC
  • A Bit Difficult
  • 15 - 30 mins
  • Nutdriver, Screw drivers
Replaced the timer.

I set the arrow on the dial to "off"

Hardest part was removing and reinstalling the spring-loaded plastic knob on the dial.

Popped off the central disk, dropped the retaining spring clip with a screw driver and removed the spring assembly and dial from the timer shaft, in sequence. (Repeated this process to install, after new timer was mounted).

Two top screws hold the face plate and two hex nuts hold timer in the mointing.

the timer's lectrical plug and scocket hook up was simple.

I thought calibrating the new timer could be a problem but a permanet pin in the timer shaft points to the cycle (when installed) even when the arrow knob is removed.

Greg Jones, Charlotte N.C.
Read less
Was this helpful?
Thank you for voting!
Spin cycle did not work always on the regular cycle
6 of 6 people found this instruction helpful.
  • Dennis from Dickinson, ND
  • Easy
  • Less than 15 mins
  • Nutdriver, Screw drivers
First I unplugged the machine to prevent me from getting electricuted.
Next I snapped the control knob cap off.
Removed clip that held knob on timer shaft.
Removed 2 inside phillips screws holding the control panel located on top.
I tilted panel forward enough to get my hand on timer.
I then used a 5/16 nut driver to remove the 2 screws attaching the timer to the panel.
Next I unplugged the wire harness.
The old timer is now ready to be discarded.
I assembled the new timer in the reverse order the old one was removed.
Read less
Was this helpful?
Thank you for voting!
The timer was not working causing the washer to not cycle properly.
4 of 10 people found this instruction helpful.
  • Linda from Crestview Hills, KY
  • Really Easy
  • Less than 15 mins
  • Screw drivers, Socket set
Pulled knob off timer. Removed four screws at the top of the piece holding the timer in place. Pulled the wires out of the fitting. Then reversed procedure to put back together.
Was this helpful?
Thank you for voting!
  • 1

DIY Questions and Expert Answers

Be the first to ask our experts a question about this part!

This Part Also Fits These Models

Don't see your model? Use our Fit Checker to confirm!

Check Part Fit
Part #WP208292
Brand
Model Number
Description
Maytag
LAT7793AAL
Washer - Top Loading
Maytag
LAT7793AAW
Washer - Top Loading
Maytag
LAT7793ABL
Washer - Top Loading
Maytag
LAT7793ABW
Washer - Top Loading
Maytag
LAT9593AAL
Washer - Residential
Maytag
LAT9593AAW
Washer - Residential
Maytag
LAT9593ABL
Washer - Residential
Maytag
LAT9593ABW
Washer - Residential
Timer
$608.41
Special Order
✖
Stock Status

In Stock

Item is in stock and is estimated to be delivered in 2-3 business days via Standard Shipping.

On Order

Item is not in stock and usually ships 3-5 business days from the time you place your order.

Special Order

Item is not in stock and usually ships 10-15 business days from the time you place your order.

NLA - No Longer Available

This item is no longer being made by the manufacturer, and cannot be added to your shopping cart.