![Customer Service Representative](https://partselectca-dsfph5cffxaaesb6.z01.azurefd.net/images/csr-partdetail.jpg)
Product Description
PROBE Specifications
Note: Connector could be different than original. If so cut & splice wires together with porcelain wire nuts.
![How Buying OEM Parts Can Save You Time and Money How Buying OEM Parts Can Save You Time and Money](https://img.youtube.com/vi/d6AvOkulk_g/maxresdefault.jpg)
How Buying OEM Parts Can Save You Time and Money
Part Videos
Replacing your Frigidaire Range PROBE
![Replacing your Frigidaire Range PROBE Replacing your Frigidaire Range PROBE](https://img.youtube.com/vi/SabKIvKclnw/maxresdefault.jpg)
Troubleshooting
This part fixes the following symptoms:
Little to no heat when baking | Element will not heat | Will Not Start | Oven is too hot
This part works with the following products:
Range, Wall Oven.
This part works with the following products:
Frigidaire, Kenmore, Tappan, Crosley.
Part# 316233903 replaces these:
AP5998652, 316217008, 316233900, 316233902
Customer Reviews
Filter By Rating:
- < Prev
- 1
- Next >
Sort by:
Search filter:
Clear Filter
Your search term must have 3 or more characters.
Keep searches simple. Use keywords, e.g. "leaking", "pump", "broken" or "fit".
Sorry, we couldn't find any existing reviews that matched. Try using some different or simpler keywords.
Michael S - September 11, 2023
Verified Purchase
Part came promptly, didnt change the operation of the stove
The part was satisfactory but didnt change the problem
Tom A - May 27, 2022
Verified Purchase
Oven temp sensor
Yup! T'was gud.
Carla R - April 24, 2021
Verified Purchase
Easy to change.
Part was in great shape, arrived quickly, and super easy to change, and it fixed the problem
Ryan S - November 2, 2018
Verified Purchase
Easy repair.
Came quick and what i wanted.
- < Prev
- 1
- Next >
Customer Repair Stories
Average Repair Rating: 4.1 / 5.0, 5 reviews.
What's this?
- < Prev
- 1
- Next >
Sort by:
Search filter:
Clear Filter
Your search term must have 3 or more characters.
Keep searches simple. Use keywords, e.g. "leaking", "pump", "broken" or "fit".
Sorry, we couldn't find any existing installation instruction that matched.
Range would not come on
Turned off power, took back off stove removed old probe.
I had to splice wires since new probe ends did not match up.
the instructions were to splice the wires. I had the breaker off for about 3 hours. this is not in the instructions, but being a widow, I had to ask a few people why it would not come on after I connected the wires.
After waiting, I turned the breaker on and my range came back on.
I had to splice wires since new probe ends did not match up.
the instructions were to splice the wires. I had the breaker off for about 3 hours. this is not in the instructions, but being a widow, I had to ask a few people why it would not come on after I connected the wires.
After waiting, I turned the breaker on and my range came back on.
Other Parts Used:
-
MaryLou from Monroe, NC
-
Difficulty Level:Easy
-
Total Repair Time:30 - 60 mins
-
Tools:Pliers, Screw drivers
103 of 187 people
found this instruction helpful.
Was this instruction helpful to you?
Thank you for voting!
Error message on display ff30
Slid oven out removed one screw one plug replaced part took 5 minutes.told parts repair the error message and they sent me the correct part in two days will use them again saved me from Repair man wanted 85 dollars just to look at it my cost was 28 for probe and 8 dollars for shipping already helped neighbor with their stove they needed new ignighter 12 dollars repair place want 110 to come look at it this site walks you through repair best service!!!!
Other Parts Used:
-
Roger from CHICAGO, IL
-
Difficulty Level:Really Easy
-
Total Repair Time:Less than 15 mins
-
Tools:Pliers
6 of 7 people
found this instruction helpful.
Was this instruction helpful to you?
Thank you for voting!
Oven wasn't heating properly for a few months and then stopped altogether
The hardest part was pulling the oven away from the wall. Two bolts hold the sensor in place and a clip connects the electronics. Replacing the old one was trivial.
Other Parts Used:
-
Matt from KENNETT SQ, PA
-
Difficulty Level:Really Easy
-
Total Repair Time:15 - 30 mins
-
Tools:Socket set
4 of 4 people
found this instruction helpful.
Was this instruction helpful to you?
Thank you for voting!
Never received parts from PartSelect!!!
It went easy, I ordered the part from another vendor, received it in 3 days and it only took about 20 minutes to install.
I do not recommend ordering from PartSelect!
I do not recommend ordering from PartSelect!
Other Parts Used:
-
Ralph from SULLIGENT, AL
-
Difficulty Level:Really Easy
-
Total Repair Time:30 - 60 mins
1 person
found this instruction helpful.
Was this instruction helpful to you?
Thank you for voting!
Oven would not get up or stay up to selected temperature
Pull stove out to get behind it,unplug temperature probe plug. Remove temp probe from oven by removing the screw holding it in place on back of oven. Cut plug off temp probe unit leaving as much lead wire as possible on plug end. Strip wires on new probe and end of plug wires(one quarter inch). Then I used two small butt connectors to join the stripped wires,one for each pair of wires. Two small wire 'nuts' may also be used as the connections are outside the oven and not exposed to the heat of the oven while it is in operation. Hope this helps the inexperienced 'do it yourselfers'--:)
Other Parts Used:
-
wondell from Winnemucca, NV
-
Difficulty Level:Easy
-
Total Repair Time:Less than 15 mins
-
Tools:Nutdriver
0 of 1 people
found this instruction helpful.
Was this instruction helpful to you?
Thank you for voting!
- < Prev
- 1
- Next >
Questions and Answers
Ask our experts a question about this part and we'll get back to you as soon as possible!
- < Prev
- 1
- 2
- Next >
Sort by:
Search filter:
Clear Filter
Your search term must have 3 or more characters.
Keep searches simple. Use keywords, e.g. "leaking", "pump", "broken" or "fit".
Sorry, we couldn't find any existing answers that matched.Try using some different or simpler keywords, or submit your new question by using the "Ask a Question" button above!
Cory
September 24, 2017
How to test probe
For model number 79095042503
Hi Cory,Thank you for the great question. Testing the temperature sensor probe on your oven is easy. With the sensor at room temperature, measure the resistance between the two prongs at the end of the sensor connector. The resistance of the sensor should read approximately 1080 – 1090 ohms at room temperature. Hope this helps!
11 people found this helpful.
Was this helpful?
Thank you for voting!
Kay
October 18, 2017
Oven keeps heating. Gives error f-10. Would this be a bad probe?
For model number FFEF3011LWA
Hi Kay, Thank you for the question. Yes the F-10 Error code indicates there is an issue with the temperature onside the oven.I suggest replacing the Probe or testing it. With the sensor at room temperature, measure the resistance between the two prongs at the end of the sensor connector. The resistance of the sensor should read approximately 1080 – 1090 ohms at room temperature. Hope this helps!
4 people found this helpful.
Was this helpful?
Thank you for voting!
Taleathia
April 19, 2018
Stove timer kept beeping gave error code f10 replaced probe in 2015 local electric company said i can use range top by igniting with a lighter. Do i need probe and ps1528268
For model number CRG3150LWE
Hello Taleathia, thank you for your question. A bad temperature sensor probe is one of the causes for an F10 error code. The temperature probe is supposed to detect the exact temperature in the range cavity and relay it to the oven's main control so it knows when to shut off the heating elements. I would suggest replacing the PROBE part number 316233903. I hope this helps!
2 people found this helpful.
Was this helpful?
Thank you for voting!
Mike
November 20, 2018
My gas oven comes on (igniter should be good) usually comes up to temp correctly but lately, it looses heat and won't come back up to temp. I pulled the temp sensor out of the back of the stove and checked resistance. At room temperature, my meter showed .775 amps of resistance. Probably a bad temperature sensor, would you agree that this is the first part i should replace? Its two days before thanksgiving and if my wife cant bake...well you know what house i am going to be in...the dog house.
Hi Mike, thank you for your question. Your oven temperature sensor should be reading between 1000 - 1100 ohms. So it does sound like it is your sensor that is the issue. I hope that helps. Good luck with your repair.
1 person found this helpful.
Was this helpful?
Thank you for voting!
Nancy
February 26, 2018
My oven was on and i heard a pop and then it quit working. The electric burners on top of the stove work, the lights and clock work, but the oven and broiler do not.
For model number FEF365ASK
Hello Nancy, thank you for your question. The popping sound was probably a resistor, or capacitor on the Electronic Clock/Timer part number 316207510. You will want to replace this part. Please enter the part number into the site for current price and availability. Good luck with your repair!
1 person found this helpful.
Was this helpful?
Thank you for voting!
Mike
February 13, 2019
Oven will not heat. Elements check good got a code f30?
For model number fef326fsb
Hello mike, Thank you for the question,. I first suggest testing the Sensor Probe, Testing the temperature sensor probe on your oven is easy. With the sensor at room temperature, measure the resistance between the two prongs at the end of the sensor connector. The resistance of the sensor should read approximately 1080 – 1090 ohms at room temperature. If the probe is good you may have a defective control board, Part Number: PS1528267. Hope this help!
1 person found this helpful.
Was this helpful?
Thank you for voting!
Related Parts:
Midge
April 8, 2019
Code f1 comes up. When i turn on oven it overheats and burns everything
For model number GLEF378AQC
Hi Midge, thank you for your question. There are a few parts that could cause this issue in your appliance. First I would say test your elements with a multi meter to see if they are working correctly or not. They should be reading between 0 - 50 ohms to be working correctly. The other part you should check would be your oven temperature sensor. That can also be tested with a multi meter and should be reading between 1000 - 1100 ohms. If those three parts are fine however, then the issue may be in your control board. I hope that helps. Good luck with your repair.
1 person found this helpful.
Was this helpful?
Thank you for voting!
Related Parts:
Renee
August 7, 2019
My oven doesn’t come on right away. But after a while, if left on it eventually turns on and gets real hot. I’m assuming it’s my temp sensor. Could it be anything else?
For model number CRG4150LWE
Hello Renee, thank you for inquiring. It could be this Probe part number PS11731754 for your model causing the issue. You may also want to consider the Electronic Oven Clock/Timer part number PS1528268 for your model. I hope this helps and good luck with your repair!
1 person found this helpful.
Was this helpful?
Thank you for voting!
Eusebio Garcia
October 26, 2017
My oven turns on and then after a while turns off
For model number FGFS36FWD
Hi Eusebio,
Thank you for your inquiry. There are some parts that you will need to check to see which one is causing the issue. You will need to check the electronic oven clock/timer, the probe, the spark module, the clock overlay, the oven igniter, the oven light socket, the knobs and the safety valve. I hope this helps. Thank you and have a great day!
Was this helpful?
Thank you for voting!
Mario
February 6, 2018
Replaced the ignitor switch, control panel works, stove top works but oven won't come on.
For model number LFGF3014LBC
Hi Mario, Thank you for the question. When you turn the knob for the oven can you smell gas?If not you may need to check the Safety Valve, PartSelect Number PS446204. Hope this helps!
Was this helpful?
Thank you for voting!
- < Prev
- 1
- 2
- Next >
✖
Ask a Question
Ask our experts a question on this part and we'll respond as soon as we can.
Sorry, we couldn't find a match for "".
Here's a guide for finding your model number.
Something went wrong. Please try again later.
Your Question Has Been Submitted!
Our experts will send you an email as soon as your question has been answered.
Related Parts
Model Cross Reference
This part works with the following models:
PartSelect Number: PS11731754
Manufacturer Part Number: 316233903
Manufacturer Part Number: 316233903
Brand
Model Number
Description
![Customer Service Representative](https://partselectca-dsfph5cffxaaesb6.z01.azurefd.net/images/csr-partdetail.jpg)