Ask our experts a question about this part and we'll get back to you as soon as possible!
1 question answered by our experts.
< Prev
1
Next >
Sort by:
Search filter:
Clear Filter
Your search term must have 3 or more characters.
Keep searches simple. Use keywords, e.g. "leaking", "pump", "broken" or "fit".
Sorry, we couldn't find any existing answers that matched.Try using some different or simpler keywords, or submit your new question by using the "Ask a Question" button above!
Jack
February 13, 2020
B4 it went out completely.. the washer would come on to select. hit start it would go out.. sometimes it start goes to wash then out.. now it will not turn on at all.. could this be circuit board
For model number 700 series Kenmore washer. Top load
Hi Jack,
Thank you for your question. Depending on your model, there are some parts that you will need to check to see which one is causing the issue. You will need to check the lid switch and actuator, the door switch and strike, the start switch or timer, the knobs, the drive motor and the electronic control board. For information specific to your washer, we would need the complete model number from it. Here is a link from our website that you may reference on where to find the model number on your appliance, https://www.partselect.com/Find-Your-Washer-Model-Number.aspx. We hope this helps. Thank you and have a great day.
1 person found this helpful.
Was this helpful?
Thank you for voting!
< Prev
1
Next >
✖
Ask a Question
Ask our experts a question on this part and we'll respond as soon as we can.