If your washer isn’t spinning properly, this motor rotor position sensor might be the solution. It keeps track of how fast and in which direction the rotor is turning, sending that information to the control board to help your machine run smoothly. Installation is simple, but be sure to unplug the washer first to stay safe.
How Buying OEM Parts Can Save You Time and Money
Troubleshooting
This part fixes the following symptoms:
Spinning Issues
This part works with the following products:
Washer.
This part works with the following products:
LG.
Part# 6501KW2001B replaces these:
AP5973402, 6501KW2001A
Customer Reviews
Average Rating:
★★★★★
★★★★★
5 Reviews
5.0
Filter By Rating:
5 Stars
5
4 Stars
0
3 Stars
0
2 Stars
0
1 Star
0
< Prev
1
Next >
Sort by:
Search filter:
Clear Filter
Your search term must have 3 or more characters.
Keep searches simple. Use keywords, e.g. "leaking", "pump", "broken" or "fit".
Sorry, we couldn't find any existing reviews that matched. Try using some different or simpler keywords.
★★★★★
★★★★★
Randy P - December 8, 2021
Verified Purchase
perfect match to old part
took less than a half hour to install part ,reassemble and have washer working like new again.
★★★★★
★★★★★
KENNETH S - May 1, 2021
Verified Purchase
CORRECT PART. CURED MY PROBLEM
FAST SERVICE. FAST DELIVERY
★★★★★
★★★★★
Alicia T - November 18, 2021
Verified Purchase
Really fast delivery!
It was the exact part we needed!
★★★★★
★★★★★
Preslava R - October 9, 2020
Verified Purchase
great service, part saved my machine
Very satisfied with this service, quick delivery. Part was exactly what was needed, fit in perfectly and our washing machine works like new. Thank you so much Partselect. Keep on doing the good job. Highly recommend.
★★★★★
★★★★★
Robert B - November 23, 2020
Verified Purchase
Worked great
The part is in and the machine back in service,Should let people know that Purolator will only deliver to Rural addresses. Not PO boxes
< Prev
1
Next >
Customer Repair Stories
Average Repair Rating: 4.0 / 5.0, 2 reviews.
What's this?
< Prev
1
Next >
Sort by:
Search filter:
Clear Filter
Your search term must have 3 or more characters.
Keep searches simple. Use keywords, e.g. "leaking", "pump", "broken" or "fit".
Sorry, we couldn't find any existing installation instruction that matched.
would drain but did not spin
followed instructions on video , when part was delivered I had washer fixed in about 1/2 hour, very easy to fix . Wife is happy and I saved a lot of money. Thank you partselect.com
Other Parts Used:
John from JUPITER, FL
Difficulty Level:
Really Easy
Total Repair Time:
15 - 30 mins
Tools:
Pliers, Screw drivers, Socket set
3 of 3 peoplefound this instruction helpful.
Was this instruction helpful to you?
Thank you for voting!
Drum would not spin, just rock back and forth
Straight forward repair when you have the correct part. Remove rear panel, Remove magnetic rotor off drum. Remove rotor, unclip sensor, replace with new sensor. Put back together in reverse order.
Drum spins !!!
Other Parts Used:
JAMES from FLAGSTAFF, AZ
Difficulty Level:
Really Easy
Total Repair Time:
30 - 60 mins
Tools:
Screw drivers, Socket set
2 of 2 peoplefound this instruction helpful.
Was this instruction helpful to you?
Thank you for voting!
< Prev
1
Next >
Questions and Answers
We're sorry, but our Q&A experts are temporarily unavailable.
Please check back later if you still haven't found the answer you need.
1 question answered by our experts.
< Prev
1
Next >
Sort by:
Search filter:
Clear Filter
Your search term must have 3 or more characters.
Keep searches simple. Use keywords, e.g. "leaking", "pump", "broken" or "fit".
Sorry, we couldn't find any existing answers that matched.Try using some different or simpler keywords, or submit your new question by using the "Ask a Question" button above!
Edwin
March 28, 2023
Display shows..."LE"
In manual, troubleshooting states..."Thermal overload protection circuit in the motor has been tripped."
Is this the solution to my problem?
For model number WM2020C
Hi Edwin, thank you for contacting us. According to our research, the LE error code indicates that the motor cannot operate properly either due to overloading or because a foreign object is stuck in the tub. To troubleshoot this, unplug the power cord, wait for 30 minutes, and then try the cycle again. Unload the clothes from the tub. If you see something stuck in the tub, remove it using a plier or tweezer. If the issue remains, we would suggest checking the stator motor assembly, part number PS3522949. We hope this helps!
Fresh Flow Produce Preserver is made for your refrigerator to help keep produce fresh for longer by absorbing the chemical, ethylene, that causes your fruits and vegetables to ripen quicker. Your produce could be fresh f...
Having a problem with a funky-smelling washing machine, or one that just doesn't seem to clean your clothes as well as it used to? Say hello to the Affresh Washing Machine Cleaner by Whirlpool. This powerful washing help...
Affresh dishwasher Cleaner is specially formulated to help remove limescale and mineral build-up that can be unsightly and could affect your dishwasher's performance. Each tablet is designed to clean inside your machine ...
Make your cooktop shine with Frigidaire ReadyClean Glass and Ceramic Cleaner. Our scratch-free, streak-free formula removes smudges, grease, burnt-on food, dirt and oil, while protecting and polishing to repel dust and d...
