Ask our experts a question about this part and we'll get back to you as soon as possible!
2 questions answered by our experts.
< Prev
1
Next >
Sort by:
Search filter:
Clear Filter
Your search term must have 3 or more characters.
Keep searches simple. Use keywords, e.g. "leaking", "pump", "broken" or "fit".
Sorry, we couldn't find any existing answers that matched.Try using some different or simpler keywords, or submit your new question by using the "Ask a Question" button above!
Mike
January 8, 2018
Is this the on/off for the icemaker
For model number KSRI25FNBL00
Hi Mike,
Thank you for your question. Yes, this is the slide that turns the ice maker on and off. I hope this helps. Thank you and have a great day!
2 people found this helpful.
Was this helpful?
Thank you for voting!
Kay
December 4, 2019
There is a "filter" light indicator on the box where you can turn the ice maker on or off. That light is red indicating a filter change. The filter light on the refrigerator side is Green indicating it is ok.. so are there two filters on the refrigerator? if there are two, i need to replace the one that goes to the ice machine.. can you tell me the part number?
For model number 106.53332300
Hello Kay and thanks for writing.
There is only 1 filter.
It seems the filter you are looking for has been discontinued for your model and is no longer available. We have no known replacement information in our system. We recommend you contact the manufacturer of the part to see if they have recently released a new substitute.
Kenmore 888-536-6673 We do carry different spare parts for units such as yours, for example, Part Number: PS11728084 Good Luck with your repair.
This set of two electronic control boards contains both the emitter and the receiver. These boards tells the icemaker when it's full and that it has to dump the ice, and it also tells the icemaker when to refill with wat...
This part is a replacement flipper or emitter cover for your refrigerator. It is made of white plastic and is approximately 3 inches by 2 inches. The flipper shields the emitter control board and houses the flipper cover...