XRH11Z Makita Hammer - Parts

Included in Part Number 516306-1. rnThis Ball Bearing is sealed on both sides. This genuine Makita replacement part is sold individually. rnrn • Ball bearings minimize friction between rotating parts in your tool. The balls or rollers bear the load and spin, distributing the weight evenly, while the minimal contact area of the balls re...Read moreduces friction. This reduces wear on the tool, allowing it to run smoothly. rn • Bearings experience constant wear when the tool is in operation from pressure, heat, vibration and friction. Because of this, many Bearings need periodic maintenance or replacement.

This is an authentic Makita replacement part, sourced from the original manufacturer for use with screwdrivers, plate joiners, and pneumatic nailers. The special o-ring is used with several different types of equipment and the application of the o-ring can vary based on the model of the power tool. This o-ring is available as an individual replacement part, please see model diagram for associative parts.

This O-ring seal helps maintain proper internal pressure within rotary and demolition hammer mechanisms, supporting efficient operation and preventing leaks of air, oil, or grease. Made from durable elastomer material and measuring approximately 0.63 × 0.63 × 0.63 inches, it is designed to withstand heat and high-pressure conditions durin...Read moreg heavy use. Replacing a worn or damaged O-ring helps restore compression, improve hammering performance, and ensure smooth, reliable tool operation.

This is an OEM part sourced directly from the manufacturer. The steel ball is commonly found in Makita drills and screwdrivers. This part may be found in different locations in the machine, depending on model. Please be aware that there are different steel balls used in the machine. Refer to the parts diagram to be sure of ordering th...Read moree correct part. You may require a screwdriver when replacing this part. It is advisable when removing multiple parts to keep careful track of their order so they can be reassembled correctly. This item is sold individually.

This steel ball is an authentic OEM component which is specially designed for use with Makita rotary hammers. The ball is fitted within the tool holder, providing the ability to secure a drill bit. It is an identical replacement for a faulty or a missing hardware that was installed on a new unit. Note, this high-quality steel ball is sold...Read more individually. You will need a screwdriver to remove the old part and secure the new one. Refer to the owners manual and the diagrams for your model for the exact location and the correct application.

This is a genuine manufacturer-sourced hardware. It is specially designed for use with Makita rotary hammers. This is the spring that is secured under the chuck cover. The purpose of a spring is to apply tension on connected components. Unfortunately, over time it may wear out, lose some of its tension or simply get lost eventually requir...Read moreing a replacement. To ensure the exact location and the correct installation, make sure to check the owners manual and the diagrams of your model. One durable metal spring is included.

This tapping screw is an authentic hardware that is supplied by original tool manufacturer for use with a variety of Makita power tools. It has multiple uses depending on the model of your unit, please make sure to check appropriate diagrams for correct location and use of this screw. Note this durable metal screw is sold individually.