WRR56X18FW02 Whirlpool - Instructions

The installation was just moving the higher shelf, finding the best location and clicking it in. Now for the important part - your order takers are the best I have ever dealt with. Not only are they friendly and polite, they are smart,willing to think outside the box and not give up until they are able to solve the problem. My model number wasn't on the web page but they found another data set and found my part. Give them a raise!

I unplugged the unit Frist. Then I removed the grill covering the compressor and fan from the back. I then located the rear wheel and pin. I bent down the retaining tab and removed the pin and wheel. I installed new wheel and pin and bent retaining tab back to origional location. Replaced grill and checked unit for proper operation.

I got the part....I put it in. That's about it.

remove fiber grill cover, remove large bolt holding under frame ( with a 2X4 block, place under refrigerator on outside edge so frame can drop down.) remove pin from broken wheel, replace reversing proceedure. Note: when blocking refrigerator, care must be taken not to let block extend under entire frame. it only needs to be placed approx 3/4" under edge of refrigerator.

Easily ordered the part, arrived quickly, good price, just what we needed. Easy peasy install with a screwdriver. I'll shop here, again!