WM45B Bostitch Nailer - Parts

This is an authentic OEM part. The spring pin (m3x12mm) is compatible with several nailers and staplers. The metal component assists with fastening the magazine toggle, and is sold individually. Pliers and a wrench set may be helpful in making the replacement.

This o-ring is a high quality item designed for Bostitch nailers and staplers. It is an authentic part that is supplied directly from original equipment manufacturer. This o-ring is generally used to provide a seal for the trigger valve. Over time these rubber parts tend to shrink, become brittle and crack allowing for air leaks. Keep an ...Read moreeye on the tools performance and replace o-rings as needed to maintain optimum performance. Please note, one rubber o-ring is included per order. Replacing this item you will need hex key also known as an allen wrench.

The metal compression spring is made of metal and goes between the check pawl and the door. This part is available as an individual replacement and is an OEM replacement part from the manufacturer Bostitch for use in nailers. Springs can lose their tension over time and will need to be replaced. A set of pliers and a socket set may be needed when replacing this spring.

This is an authentic replacement pin which is sourced from the original equipment manufacturer for use with Bostitch nailers and staplers. It is a standard hardware which may have multiple applications, please make sure to refer to the appropriate diagrams of your model for the correct location and application of this hardware. Keep in mi...Read morend this high-quality spiral pin is made of durable metal and is sold individually.

This is an original Bostitch replacement part. The washer is designed by the manufacturer for use in staplers and nailers. This part is made of metal, and may be found in various locations in the machine, depending on model. Please be aware that there are different washers used in the machine. Refer to the parts diagram to be sure of ...Read moreordering the correct part. You may require an Allen wrench or hex key when replacing this item. This part is sold individually.

This is an original Bostitch replacement part manufactured for use with nailers. The thumbscrew also has a hex head and is generally used to secure the rear cover. This screw is sold individually please see model diagram for additional parts.

This genuine manufacturer-sourced part is specially designed for Bostitch pneumatic nailers. It is an important component which provides an air-tight seal between connected components. Unfortunately, over time it will wear out and it may begin to crack eventually requiring a replacement. To ensure the correct repair procedure, refer to th...Read moree appropriate diagrams for your model. Note, this high-quality O-ring is made of durable rubber material and is sold as an individual item. A screwdriver will be needed to take apart and reassemble the tool.

This part is used in various Bostitch nailers and staplers. It is a genuine part made by original manufacturer. An O-ring is a flexible circle used to create a tight seal between rigid parts while preventing leaks. There are multiple sizes of O-rings used in each tool. See manual for correct O-ring needs and placement. Sold individually. • Size: 1.638" x .118"

This is an original Bostitch replacement part manufactured for use with pneumatic nailers. Washers are used to disperse pressure from a nut or bolt across a wider surface area against a part assembly. This washer has multiple applications, please see model diagram for part location and usage. The special washer is sold individually.

Restore your tool’s performance with this complete trigger valve repair kit for brad nailers and staplers. If your tool is leaking air or frequently misfiring, replacing the trigger valve may solve the issue. This kit includes everything needed for the repair: a valve assembly with two O-rings, lubricant, a spring pin punch, and step-by-s...Read moretep instructions. The included O-rings—also available separately—are common wear items that can cause performance issues when damaged. Installation is simple and only requires a hammer.

This is a genuine replacement part manufactured for use with pneumatic nailers. This special metal nut is compatible with several types of nailers, and is typically used to secure the magazine bracket, to the slot at the base of the handle body. There is other hardware required to secure the magazine bracket, please see model diagram for additional associative parts. This nut is sold individually.