The drain pump and motor assembly may also be known as the washer drain pump and is a part for your washer. The drain pump helps expel water from the washing machine. The drain pump is activated after...
This washer hose with bellows, also known as a dispenser hose, is a genuine OEM replacement part for your washer. Replacing this part can be helpful if your washer is leaking. The dispenser hose conne...
This door boot is for washers.
Door boot forms a seal between the wash tub and the door, preventing leaks.
Unplug the washer before installing this part. Wear work gloves to protect your hands.
This is a replacement detergent dispenser for your washer. It stores the detergent, and then dispenses it into the washer at the appropriate point in the wash cycle. If the detergent dispenser is brok...
This valve is used for cold water, bleach dispenser and prewash cycles. It has a standard hose fitting inlet with 2 outlets facing 45 degrees to the right and one outlet facing 45 degrees to the left.
This drain hose plug, also known as a hose cap, is a genuine OEM part for your washing machine. This plug caps the drain hose from the pump housing, and helps prevent leaks from your washer. Before be...
This part is the replacement rear tub gasket for your washer. It is made of black plastic and is approximately 3-1/4 inches in diameter. The rear tub gasket forms a watertight seal between the rear tu...
This levelling leg is a genuine replacement part. It is used to help keep your washing machine stable and balanced. It helps support your appliance. It screws into the base of your washer, and you can...
$50.01
In Stock
Questions And Answers for WM3170CW
Ask our experts a question about this model and we'll get back to you as soon as possible!
10 questions answered by our experts.
< Prev
1
2
Next >
Sort by:
Search filter:
Clear Filter
Your search term must have 3 or more characters.
Keep searches simple. Use keywords, e.g. "leaking", "pump", "broken" or "fit".
Sorry, we couldn't find any existing answers that matched.Try using some different or simpler keywords, or submit your new question by using the "Ask a Question" button above!
George
February 10, 2020
What year is my LG wm3170cw s/no: "507pnpd53104"? How do i know when 10 year warranty is up?
For model number WM3170CW
Hello and thank you for writing.
According to the serial and model number this product may have been manufactured in China, July of 2005. We hope this helps. Please contact us anytime if you require further assistance.
4 people found this helpful.
Was this helpful?
Thank you for voting!
Zandra
February 16, 2020
Le code
For model number WM3170CW
Hi Zandra. You will need to reduce the load size and reset the washer. You do this by unplugging the washer. Hold start/pause for 5 seconds and plug the washer back in. Thank you for your question and good luck with your repair.
2 people found this helpful.
Was this helpful?
Thank you for voting!
Jesus
January 4, 2020
Why my washer vibrate to much even if is in good level
For model number WM3170CW
Hi Jesus, this could be faulty shock absorbers, PS11707466 sold individually. Thank you for your question and good luck with your repair!
Hello i have a small part that broke off the washer door and i need to replace it. It has a little spring and magnet that helps keep the door shut. I don't know what it's called. I can send a photo if i'm not being clear. Can you please tell me what i need to replace it? Thanks!
For model number WM3170CW
Hello Stephanie, Thank you for your inquiry. This may be part of the switch assembly, which the metal door lock goes into, or it could be part of the hinge. Hope this helps.
My washer has a rubber seal that helps the door shut properly and not leak I suppose. There are many crevices and generally it causes a lot of issues with the washer for cleaning. It regularity catches hair and grows mold. Is there a way to replace this part or remove it to clean it properly?
For model number WM3170CW
Hello Andrew, Thank you for contacting us. We have researched the model you have provided and have found the part you are looking for is PartSelect Number PS3535210 for the Door Boot Seal. We have included a How to Video on removing and replacing the Seal. We hope this helps, good luck with this repair!
Removed the top of the washer by removing the 4 back screws and 2 small brackets. Then I removed the front panel, this was actually the hardest part, 2 screws and 8 tabs that you pop out carefully from the top of the panel. I only disconnected the power button and was able to rest the panel on top of the washer. The rest of the washer came apart quickly just moving down the front of the washer and removing the door, latch, tub gasket, drain cover. Removing the pump was just a mater of disconnecting the drain hoses, and one clip under the drain assembly. 3 screws attach the drain to assembly to the pump and only 2 wires that are clearly marked. Reassembly is just going back through in reverse order of disassenbly. The best thing about this is that it all comes apart with a standard phillips screwdriver.
Pull washer away from wall. Unplug cord and remove drain hose from receptacle. Remove 4 screws holding panel to rear of washer. Squeeze and slide back hose clamps on each end of drain hose and loosen center clamp with screwdriver. Remove old hose. Reinstall new hose in reverse order using existing clamps. Re-install back panel.
Thank you for the very helpful YouTube video. After watching the video, I was able to diagnose the problem, buy the part from your website, and complete the repair. This is my personal machine - I am not a professional repairman.