Models > WFW70HEBW1 > Instructions

WFW70HEBW1 Whirlpool Washer - Instructions

All Instructions for the WFW70HEBW1
31 - 32 of 32
Keep searches simple. Use keywords, e.g. "leaking", "pump", "broken" or "fit".
Had to install shipping bolts so we could move the washer
Really was not a repair
Parts Used:
Shipping Bolt Kit
  • Gary from Ardmore, AL
  • Difficulty Level:
    Easy
  • Total Repair Time:
    30 - 60 mins
  • Tools:
    Socket set
0 of 1 people found this instruction helpful.
Was this instruction helpful to you?
Thank you for voting!
Washer Would Drain But Not Spin
Removed rear cover (6 screws) unpluged harness from motor control and removed same. Replaced motor control reinstalled harness. Replaced rear cover. Parts used motor control board.
Parts Used:
STACK KIT FOR LONG VENT DRYER
  • Nelson from Middletown, NY
  • Difficulty Level:
    Easy
  • Total Repair Time:
    30 - 60 mins
  • Tools:
    Pliers, Screw drivers, Wrench (Adjustable)
0 of 26 people found this instruction helpful.
Was this instruction helpful to you?
Thank you for voting!
All Instructions for the WFW70HEBW1
31 - 32 of 32
Back to Top