WFMC3201BR Bosch Washer - Instructions

Look up how to repair on you tube. Removed control panel door and front panel as shown to expose water pump. Removed both hose. Showed how to release water pump from under machine ( I use vibrating cutter to cut rubber feet that held in place) this was much easier than way shown in video. Caution when putting hose clamp Bach on make sure it is all the way on. If not you will have water leak drain hose come off. But panels on . Be careful not to damage door lock 124 dollars if you do. Over all very easy to replace

we watched a thorough you tube video which described each step and showed it being done, he made it look pretty easy but unforeseen elements such as rust etc took time but not obscenely so, just keep screws from each step separate and it's difficult just takes patience and a little time to get to the actual part, in fact that is the easy part taking it out and replacing it.

I followed the video and it was an easy repair. I took my time and it was an incredibly simple repair. The new part fit perfectly.

Took small door off front of machine pulled pump and unhooked wires. Hooked wires back up to new pump and installed

Took off top and back panels. Secured tub. Laid on side. Removed old pump. Cleaned up excess water with shopvac. Installed new pump. Tilt upright. Remove material used to secure tub. Reinstalled panels. Unplug everything before repair and use gloves. I cut up my hands on the panel to access pump.