WFMC3200UC-01 Bosch Washer - Instructions
Keep searches simple. Use keywords, e.g. "leaking", "pump", "broken" or "fit".
Replacement of drain pump and shock absobers (Dampers), and drive belt.
The repair was simple.
I removed the front door, hinges, front metal panel, door rubber seal, top control panel, and rear panel of machine. Removed the existing drain pump and replaced with a new one. Removed both existing shocks and installed new ones, Reassembled the machine and everything worked just perfectly.
Frank
I removed the front door, hinges, front metal panel, door rubber seal, top control panel, and rear panel of machine. Removed the existing drain pump and replaced with a new one. Removed both existing shocks and installed new ones, Reassembled the machine and everything worked just perfectly.
Frank
Parts Used:
-
Francis from TEANECK, NJ
-
Difficulty Level:Really Easy
-
Total Repair Time:More than 2 hours
-
Tools:Nutdriver, Pliers, Socket set
2 of 5 people
found this instruction helpful.
Was this instruction helpful to you?
Thank you for voting!
Drain pump quit working
Took small door off front of machine pulled pump and unhooked wires. Hooked wires back up to new pump and installed
Parts Used:
-
mike from gothenburg, NE
-
Difficulty Level:Really Easy
-
Total Repair Time:Less than 15 mins
-
Tools:Screw drivers
Was this instruction helpful to you?
Thank you for voting!
washer would not drain
Took off top and back panels. Secured tub. Laid on side. Removed old pump. Cleaned up excess water with shopvac. Installed new pump. Tilt upright. Remove material used to secure tub. Reinstalled panels. Unplug everything before repair and use gloves. I cut up my hands on the panel to access pump.
Parts Used:
-
KEVIN from FORT MYERS, FL
-
Difficulty Level:A Bit Difficult
-
Total Repair Time:1- 2 hours
-
Tools:Pliers, Screw drivers
Was this instruction helpful to you?
Thank you for voting!