This an authentic OEM 40-Watt replacement light bulb, used in a number of household appliances. It is specially designed to withstand extreme temperatures, which is why these replacement bulbs are mos...
$24.14
In Stock
Order within the next 3 hrs and your part ships today!
This control switch controls the stove top 8" surface burner. 8.9- 11.0 amp. This surface burner element switch is for an 8-inch surface burner on an oven, stove, or range. The element switch control...
$69.25
In Stock
Order within the next 3 hrs and your part ships today!
This 18 ml bottle of white appliance touch-up paint is used to cover scratches or marks on your appliance. The white touch-up paint can be used on refrigerators, microwaves, ranges, clothes dryers, an...
$17.95
In Stock
Order within the next 3 hrs and your part ships today!
This temperature sensor detects the temperature within the oven cavity. This oven temperature sensor, for ranges, works together with the oven control board to measure and regulate the oven temperatur...
$111.52
In Stock
Order within the next 3 hrs and your part ships today!
If your range’s burner isn’t heating properly or the temperature seems off, this dual element control switch could be the fix. It’s designed to manage heat for dual surface elements and fits a variety...
$119.97
In Stock
Order within the next 3 hrs and your part ships today!
This is a door hinge active with spring, for your range. The hinge controls the opening and closing of the oven door. If your oven door seems to be sticking, you may want to consider replacing this pa...
$77.84
In Stock
Order within the next 3 hrs and your part ships today!
This is a multi-use and multi-appliance screw. It can be used on a microwave, refrigerator, range/oven, air conditioner, dehumidifier, washer, or dryer. The measurements of this screw are 8 x 1/2 inch...
$28.95
In Stock
Order within the next 3 hrs and your part ships today!
The light socket on your electric range connects the power source to the light bulb. If your oven light is malfunctioning, you may need to replace the light socket. The light socket is located in the ...
$92.59
In Stock
Order within the next 3 hrs and your part ships today!
If your stove burner won’t heat up, stays on high, or won’t adjust, this switch might be the fix. It controls the heat for 6-inch electric burners and fits many Whirlpool, Maytag, and KitchenAid range...
$63.75
In Stock
Order within the next 3 hrs and your part ships today!
This oven rack offers a sturdy, chrome-finished surface for baking, roasting, and broiling in your range. It fits a wide selection of compatible ovens and is built to handle high heat and frequent use...
$65.39
In Stock
Order within the next 3 hrs and your part ships today!
Questions And Answers for WFE515S0EW0
Ask our experts a question about this model and we'll get back to you as soon as possible!
5 questions answered by our experts.
< Prev
1
Next >
Sort by:
Search filter:
Clear Filter
Your search term must have 3 or more characters.
Keep searches simple. Use keywords, e.g. "leaking", "pump", "broken" or "fit".
Sorry, we couldn't find any existing answers that matched.Try using some different or simpler keywords, or submit your new question by using the "Ask a Question" button above!
Rick
November 2, 2022
Oven will not cook throughout
For model number WFE515S0EW0
Hello Rick, thank you for contacting us. This issue is mostly caused by a faulty heating system of the oven. We would recommend checking the temperature sensor, part number PS11749737, the bake element, part number PS11747168, and the broil element, part number PS11731333. Customer service is always available to help you place an order if you are having trouble doing so. Good luck with your repair.
HAD A POWER OUTAGE. AFTERWARDS THERE WAS AN ERROR CODE ON MY RANGE F9E0. WHAT DOES THIS ERROR MEAN?
For model number WFE515S0EW0
Hello Judy, thank you for contacting us. During a power outage, if there was a surprising amount of power supply line "noise" that the control detected as an incorrect voltage amount, the control could display the F9, F9 E0, or PF Error Code. We would recommend performing a hard reset on the range by unplugging it for 5 minutes. If this does not help, the issue is probably related to the control board, part number PS12114366. Customer service is available 7 days a week if you require assistance placing an order. Thanks again for reaching out!
I need an infinite switch for my whirlpool stove large front burner . It’s an 8” but the wonky one I see it say for 6” ??
For model number WFE515S0EW0
Hello Debbie, thank you for getting in touch. The surface element switch you are looking for is part number PS11754687. If you need help placing an order, customer service is open 7 days a week!
Hi, can you please help me find the burner element control switch replacement that's compatible with my stove? Serial number R72336899. Thank you!
For model number WFE515S0EW0
Hi Shanta, thank you for contacting us. The left front dual element control switch for your model is part number PS11754687. The right rear and left rear infinite switches are part number PS11740785. Right front infinite switch is part number PS11740783. We hope that helps!
We had to take the class front off to clean and this pat Gell off and we are having lots of difficulties gettin this side mount back on
For model number WFE515S0EW0
Hello Richard, Thank you for your inquiry. We have provided links to our videos on replacing the front oven door glass and side trim pieces to assist you with your repair. There are also additional videos listed under the part information. We hope this helps you.
I numbered every part. ex: 1 L., for first part removed left side. I used a magic marker to circle the holes and wrote the number of screws used on the part, set the srews in a separete place, so that I new where these screws went to. The cleanup was pretty time consuming, but I was able to keep my stove, when every repairman I called to fix my stove told me I was better off buying a new stove. ($600.00 stove 2 years old)Please Note: The insulation blanket needed for the entire stove is two pieces, the sides and top are one part # and the bottom and back, are another part #. I did not know this. I just purchased the top and sides. I got lucky, the back and bottom were still in good shape. So I guess I should have read the description of the part more carefully to see what it covers, before I ordered it. It took two people two hours to do the work, it was really nice to have an extra set of eyes, to remember what direction pieces of metal from the stove went. I would do it all over in a heart beat instead of buying a new stove.
Opened up the back of the stove. Unpluged the sensor. Replaced the sensor. Replace the back of the stove.
The sensor that has been replaced is not what is expected. After reading all of the instructions for adjusting the temperatures, the only temp that stays steady is when we first turn on the oven to 350 degrees. That stays steady but when I turn it to 400 it slowly goes up to 425 degrees.
removed the screws holding the back metal panel, this exposed the wires to the switch. tested the wires to find that they were live when the switch was in the off position. ordered a new switch. UNPLUGED THE STOVE. removed the knob on the front of the stove. this exposed 2 screws, removed screws and the switch came away from the stove. removed each wire from the old switch and replaced them in the same position on the new switch. inserted new switch into the stove and attached the 2 screws. replaced back panel and pluged in stove. all tested well
![Replacing the Infinite Control Switch, 6"](https://img.youtube.com/vi/Iiozm-ZzeRw/maxresdefault.jpg "Replacing the Infinite Control Switch, 6"")
