The rack track stop on your dishwasher is designed to stop the dish rack at the appropriate place when opening and closing the rack. If your dishwasher is not cleaning your dishes properly, the rack s...
$5.99
In Stock
Order within the next 4 hrs and your part ships today!
Sold individually. This part secures the upper side of the dishwasher to the underside of the counter or cabinet to prevent the dishwasher from moving, shaking, or tilting forward.
$13.99
In Stock
Order within the next 4 hrs and your part ships today!
This manufacturer-certified heating element is used to create heat during the dry cycle and increase water temperature during portions of the wash cycle when certain options are selected. If your dish...
$60.99
In Stock
Order within the next 4 hrs and your part ships today!
This 18 ml bottle of white appliance touch-up paint is used to cover scratches or marks on your appliance. The white touch-up paint can be used on refrigerators, microwaves, ranges, clothes dryers, an...
$8.99
In Stock
Order within the next 4 hrs and your part ships today!
This water inlet valve should be located behind the lower kick plate panel in either the right or left corner. The attaching solenoids on the valve open and close according to the desired amount of water needed.
$86.99
In Stock
Order within the next 4 hrs and your part ships today!
This filter works with the water pump in your dishwasher. It prevents debris from entering the pump and causing damage. As a result, the filter can occasionally become clogged or damaged, and will nee...
$63.99
In Stock
Order within the next 4 hrs and your part ships today!
This part acts as as safety mechanism that keeps the dryer from overheating. Once the dryer temperature reaches a certain point, this part will shut down power to the heating element.
$34.99
In Stock
Order within the next 4 hrs and your part ships today!
Order within the next 4 hrs and your part ships today!
Questions And Answers for WDF520PADM7
Ask our experts a question about this model and we'll get back to you as soon as possible!
32 questions answered by our experts.
< Prev
1
2
3
Next >
Sort by:
Search filter:
Clear Filter
Your search term must have 3 or more characters.
Keep searches simple. Use keywords, e.g. "leaking", "pump", "broken" or "fit".
Sorry, we couldn't find any existing answers that matched.Try using some different or simpler keywords, or submit your new question by using the "Ask a Question" button above!
Jon
February 26, 2020
Our Whirlpool is not even 18 mos. Old and stopped working. It will start the cycle, fill the tub with water, then just stall. The lights stay on, but nothing happens. There's no blockage with the drain hose, because it drains fine. Thanks in advance!
For model number WDF520PADM7
Hello Jon, thank you for your question. There are a few parts we would reocmmend testing first to determine if they have failed. They are the PartSelect Number PS11743423 Thermostat, PartSelect Number PS8260087 heating element, PartSelect Number: PS11770231 pump and motor and the sensor PartSelect Number PS12070543. If those parts are tested and are fine, the issue would most likely be with the electronic board. I hope this helps.
Even on high heat my dishwasher will not dry dishes at all. Dishes are dripping wet at end of cycle.
For model number WDF520PADM7
Hello Susan, Thank you for your inquiry. We have researched the model you have provided and we would recommend checking the following parts to fix your issue: the heating element, the high limit thermostat, and the door vent. You can test the parts with a multimeter. If you are unfamiliar with how a multimeter functions, we have videos available to assist you. Also if you don't already use a rinse aid, we would recommend using one to facilitate drying. We hope this helps.
Hi Michael, thank you for contacting us. We would recommend checking the door latch, part number PS11756967, to fix the issue. It is at the top of the dishwasher door and keeps the door closed when the dishwasher is running. If this is faulty, the dishwasher may not start the cycle. We hope this sorts out your problem!
My dishwasher is not getting hot while washing dishes or drying. I have replaced the control panel. I have tested and replaced the heating element and also the switch. What else could it possibly be?
For model number WDF520PADM7
Hi Jason, thank you for your inquiry. We would recommend taking a look at the high-limit thermostat, part number PS11743423, to see if it is working or not. We hope that helps!
I purchased this dishwasher 3 yrs ago and the water pump is bad. The repair man says it’s not worth repairing. What ur was this model built?
For model number WDF520PADM7
Hi Steve, thank you for the question. Based on our research, your model was manufactured most probably in 2014. To provide you with the exact age, we will require the serial number of the unit. Please contact us anytime if you require further assistance!
1 person found this helpful.
Was this helpful?
Thank you for voting!
< Prev
1
2
3
Next >
✖
Ask a Question
Ask our experts a question on this model and we'll respond as soon as we can.
I called an experienced plumber, who balanced and installed my new dishwasher properly, using the brackets I ordered from Parts Select, after an INEXPERIENCED plumber had tossed the factory-provided mounting brackets out with the shipping carton. Relief!
unscrewed dishwasher from cabinet ...,moved out slightly....while door closed ...reached with long nosed pliers door spring pulled forward...and allowing white plastic part that fits through sleeve and fit new sleeve over it...pulled spring attaching white plastic part and pushed unit back to cabinet and replaced screws DONE.
