UT-10934 Homelite Chainsaw - Parts

This is a genuine replacement part manufactured for use with outdoor power equipment. The duckbill valve is a one-way valve allowing air into a fuel or oil tank to prevent a vacuum within the tank, also the valve prevents oil or fuel from backing up through the valve and leaking. There is a filter that is used with the valve to prevent co...Read morentaminants from entering the fuel or oil tank. The filter varies depending on the model of equipment, please note the valve is sold individually.

This is an authentic replacement part manufactured for use with chainsaws. The oil outlet grommet is commonly used to form a seal between the oil pump and oil tank. This oil outlet grommet is available as an individual replacement part, please see model diagram for associative parts.

This is an original Homelite replacement part. The split grommet is designed by the manufacturer for use in chainsaws. This part is made of pliable rubber, and is used to protect the rubber tube for the air purge bulb as it passes through the control panel. When replacing this item, you may require a flathead screwdriver to pry the old...Read more part loose. The new part can then be snapped into place. The split grommet is sold individually.

This is a genuine replacement part sourced from the original manufacturer for use with outdoor power equipment. The special screw is used with a variety of equipment and its application can vary based on the model. This screw is sold individually, please see diagram for part location and usage.

This replacement screw is an authentic item which is supplied by the original equipment manufacturer for use with handheld lawn and garden equipment. It is a standard hardware which has multiple applications depending on the model of your unit, please make sure to check appropriate diagrams for correct location and use of this item. This high-quality screw is made of durable metal and it is sold individually.

This rope is part of the pull starter system on Homelite and Ryobi gas powered lawn and garden equipment. It is an authentic manufacturer sourced replacement part, not an aftermarket equivalent. When the rope is pulled to start the engine, it is returned back into the starter pulley by means of the starter spring which is sold separately....Read more Please note, this rope is made out of strong fabric and it is sold individually. Replacing this starter rope you will need a screwdriver. • Remove the housing-cover • Remove the carburetor • Disconnect the clutch housing • Bind the engine • Remove the clutch drum • Remove the clutch • Remove the starter • Remove the starter handle • Remove the recoil pulley • Remove the old rope • Install the new starter rope • Reassemble and test the unit

This is an authentic replacement screw which is supplied by the original equipment manufacturer for use with handheld lawn and garden equipment. It is a standard hardware which has multiple applications depending on the model of your unit, please make sure to check appropriate diagrams for correct location and use of this item. This high-quality Torx screw is made of durable metal and it is sold individually.

This is an authentic OEM component from Homelite. The fuel line (carburetor to purge bulb 4") is designed for use with many chain saw devices. The flexible plastic line is fitted onto the carburetor, delivering fuel from the tank into the carburetor. The fuel line is sold individually. A screwdriver, pliers and socket set are needed for the repair.

It is a genuine OEM item that is made for Ryobi and Homelite chainsaws. This is a special component which helps to provide a tight fit for the hand guard. Unfortunately, over time it may wear out, get damaged or lost eventually requiring a replacement. This high-quality right-hand pivot is made of durable material and is sold as an indivi...Read moredual item. To ensure the proper repair procedure, check the parts diagrams for your specific model.