- Home
- TRT22MRHB0
- Instructions
TRT22MRHB0 Tappan Refrigerator - Instructions
Search repair tips from other customers using simple keywords like "replace", "fit", "remove", "inspect". DIY doesn't mean you have to do it alone!
Search filter:
Clear Filter
Your search term must have 3 or more characters.
The original support was broken, tried epoxy and it only held for a few months before breaking again
2 of 3 people
found this instruction helpful.
-
Arand from Yorktown, IN
- Really Easy
- Less than 15 mins
-
Pliers
All I had to do was remove the original support that was on the inside wall of the refrigerator, which I had to use pliers since there were broken pieces, and then I just snapped the new one into the three holes provided for this support. The crisper drawer works fine now. It literally only took about 1 minute.
Was this helpful?
Thank you for voting!
first fresh food too hot, then freezer too hot
2 of 3 people
found this instruction helpful.
-
Rita from Lake Luzerne, NY
- Really Easy
- Less than 15 mins
-
Nutdriver
Based on the website I decided it was most probably the defrost timer, and that was correct. I ordered it, watched the video, and two days later the part was at my door. Took the nut driver, removed 4 screws, then removed the old defrost timer, installed the new one, re-installed the whole plastic assembly with the four screws, and done
... Read more
!!! Couldn't have been easier.
Read less
Was this helpful?
Thank you for voting!
Defrost timer was not working
2 of 4 people
found this instruction helpful.
-
Harold from Grants, NM
- Really Easy
- Less than 15 mins
-
Screw drivers
Found the part on this site ordered and received part in 3 days. Took approx. 10 min to replace. Thanks for the quick service.
Was this helpful?
Thank you for voting!
Needed the door bins to hold more items.
2 of 4 people
found this instruction helpful.
-
JoAnn from Newark, NJ
- Really Easy
- Less than 15 mins
Just took it out of the box, wash it and put it on the inside door.
Was this helpful?
Thank you for voting!
The supports for the crisper cover had broken and the draws would not open correctly
2 of 4 people
found this instruction helpful.
-
WAYNE from NOVATO, CA
- Really Easy
- Less than 15 mins
-
Pliers, Screw drivers
I watch the how to repair video on line and the repair went very quick and easy.It was just like the video,no hidden suprises.
Was this helpful?
Thank you for voting!
The refrigerator light would not work ...even after replacing the bulb.
2 of 4 people
found this instruction helpful.
-
TIM from WOODBURY, TN
- Really Easy
- Less than 15 mins
-
Screw drivers
I used a flat head screwdriver to pry open the front of the socket as I pushed the socket toward the freezer side. I unplugged the two wires connected to the socket then re-connected the two wires to the new socket and popped the new socket back in. I then put a new light bulb in and we had light again in the fridge.
Was this helpful?
Thank you for voting!
light blub blew
4 of 10 people
found this instruction helpful.
-
earl a from GIRDLER, KY
- Really Easy
- Less than 15 mins
unplug power from ref removed old light socket only difference wired a little different checked new socket compaired to old checked terminal ends small big looked at wires big,little plugged up put in new light blub plugged ref power back on work power off pushed socket bac in power on works
Was this helpful?
Thank you for voting!
Right side door was grinding on the spindal.
1 person
found this instruction helpful.
-
Donna from Palmdale, CA
- Really Easy
- Less than 15 mins
-
Wrench set
We took the door off and replaced the pastic washer. Found out that the repair people never informed us that the door itself has a bit damaged so this repair would have to be done over and over. Nice way for them to make money off us.
We were able to fix it so that it will last a LONG time. Sometimes it realy can pay to do-it-yours ... Read more elf!
We were able to fix it so that it will last a LONG time. Sometimes it realy can pay to do-it-yours ... Read more elf!
Read less
Was this helpful?
Thank you for voting!
Temperature in both freezer and fridge sections to warm!
2 of 4 people
found this instruction helpful.
-
Thomas from Spokane, WA
- Easy
- 30 - 60 mins
-
Nutdriver, Screw drivers
Dear Part-select,
I had a fridge that was not working food was melting in the freezer, Beer was warm. You get the picture anyway using your site I found the parts needed to to fix the issue in fact I ordered two parts one fixed the issue 50% and the other like 30% of the time! both parts with overnight shipping were cheaper than 1 pa ... Read more rt if purchased at our local appliance part outlet:) not to mention the cost of a repair person. Thanks again! . Keep up the good work
Tom Houck
Spokane, WA
Houck Photo
509-723-3418
[email protected]
I had a fridge that was not working food was melting in the freezer, Beer was warm. You get the picture anyway using your site I found the parts needed to to fix the issue in fact I ordered two parts one fixed the issue 50% and the other like 30% of the time! both parts with overnight shipping were cheaper than 1 pa ... Read more rt if purchased at our local appliance part outlet:) not to mention the cost of a repair person. Thanks again! . Keep up the good work
Tom Houck
Spokane, WA
Houck Photo
509-723-3418
[email protected]
Read less
Other Parts Used:
Was this helpful?
Thank you for voting!
Coils kept icing and refrigerator stopped cooling lower compartment.
5 of 14 people
found this instruction helpful.
-
Raymond from Sierra Madre, CA
- Easy
- 15 - 30 mins
-
Nutdriver, Screw drivers
Replaced defrost timer & thermostat.
Other Parts Used:
Was this helpful?
Thank you for voting!
Refer iced up and would not keep the bottom cool. It was 70 Farenheit inside.
2 of 5 people
found this instruction helpful.
-
Larry from Newton, KS
- Really Easy
- 15 - 30 mins
-
Screw drivers, Socket set
I simply removed 4 screws holding the casing and then 2 more holding the timer. It was very easy. I then replaced the timer by unplugging and plugged the new one in. I replaced all the screws and the job was done. Less than 30 minutes. I was very impressed with the shipping time. When I ordered the part, I had it the next day.
Was this helpful?
Thank you for voting!
Refrigerator keeps frosting up and not cooling
1 of 2 people
found this instruction helpful.
-
Marvin from Pima, AZ
- Really Easy
- 15 - 30 mins
-
Nutdriver
Refrigerator started frosting up and running all the time.I'd defrost it and it would frost up again in about a week.The timer seems to be work so I just guest it mite be the Defrost Thermostat.I removed the duck in the center and back panel in the freezer compartment defrosted it and switched Thermostats and replaced panel and duck, goi
... Read more
ng to lower compartment of the refrigerator.So far it seems to be working a little more time while tell.
Read less
Was this helpful?
Thank you for voting!
No freezing or cold in either freezer or refridgerator - compressor did not run.
1 of 2 people
found this instruction helpful.
-
George from Sunnyvale, CA
- Really Easy
- 15 - 30 mins
-
Nutdriver, Screw drivers
Traced issue to defrost timer ( burned compressor & element contacts). This unit is mounted next to the temperature adjustment control in the refridgerator area - right in front. Removal of plastic cover provided easy access to the timer. Unit unscrews from the mounting then unplugs. Installation is reverse of removal.
Was this helpful?
Thank you for voting!
Defroster didn't work
1 of 2 people
found this instruction helpful.
-
George from Eatonville, WA
- Really Easy
- Less than 15 mins
-
Screw drivers
Ordered a new defroster timer and replace old one. It works just fine. A $35 repair vs a $500 new appliance.
Cool.
GWE
Cool.
GWE
Was this helpful?
Thank you for voting!
Freezer door shelf retainer bar kept falling off
1 of 2 people
found this instruction helpful.
-
Jessica from Lincoln Park, MI
- Really Easy
- Less than 15 mins
I removed the retainer bar from the freezer door and unclipped the broken end cap (the clips were broken). I snapped the new one into place and snapped the retainer bar back into the freezer door.
Was this helpful?
Thank you for voting!