Models > TLD1840CGD > Instructions

TLD1840CGD (ASSEELC) LG Dryer - Instructions

All Instructions for the TLD1840CGD
16 - 18 of 18
Keep searches simple. Use keywords, e.g. "leaking", "pump", "broken" or "fit".
Dryer wasn't getting hot enough
Removed the exhaust duct screw and removed the duct. Hardest part of the repair was reaching in one-handed to remove the screws for the parts. Make sure that the screwdriver is magnetic. Changed parts and dryer working better than it has in months.
Parts Used:
Blower Thermostat Dryer Thermistor
  • Richard from Houston, TX
  • Difficulty Level:
    Easy
  • Total Repair Time:
    15 - 30 mins
  • Tools:
    Screw drivers
Was this instruction helpful to you?
Thank you for voting!
I broke the igniter while adapting from Natural gas to LPG
This was a repair from a repair. It started as a conversion to LPG, in the process the igniter broke. The parts arrived quickly and we were able to get it back together and the wife is happy. Thanks.
Parts Used:
Gas Igniter
  • Nathan from Mount Vernon, WA
  • Difficulty Level:
    A Bit Difficult
  • Total Repair Time:
    30 - 60 mins
  • Tools:
    Screw drivers, Wrench set
Was this instruction helpful to you?
Thank you for voting!
Shutting off a while after starting. Burning smell.
Seemed to be shutting off on the safety thermostat so I replaced them all. Works.
Parts Used:
PARTS ASSEMBLY,MOTOR High Limit Thermostat and Thermistor Kit High Limit Thermostat and Thermistor Kit
  • Dennisd from Waco, TX
  • Difficulty Level:
    A Bit Difficult
  • Total Repair Time:
    1- 2 hours
  • Tools:
    Nutdriver, Screw drivers, Socket set
Was this instruction helpful to you?
Thank you for voting!
All Instructions for the TLD1840CGD
16 - 18 of 18