TDDP5013ES2P Midea Dehumidifier - Parts

Continuous drainage depends on a clear and properly fitted pump hose. Replace the hose if it is split, blocked, leaking, or too stiff to seal well. First inspect the pump outlet and make sure the drain path is open. Confirm the correct hose using the complete dehumidifier model number. Disconnect power and remove any stored water before i...Read morenstallation. Do not pinch or twist the new hose. After reconnecting it, run a short test and check every fitting for leaks.

Steady moisture control depends on a working humidity sensor. A damaged sensor may cause the dehumidifier to run too long, stop too soon, or show the wrong humidity level. First check the room temperature, air filter, airflow, and control settings. Confirm the replacement with the complete appliance model number. Disconnect power and empt...Read morey the water bucket before service. Handle the sensor and wires gently. If the readings remain incorrect after replacement, the control board may need testing.

When the fan runs but the compressor does not start, the run capacitor may need testing. A failed capacitor can be swollen, leaking, or unable to hold the correct charge. Do not touch its case or terminals. It may store dangerous electricity even after the appliance is unplugged. Check the model number and all ratings before ordering a re...Read moreplacement. Other starting parts and the compressor should also be tested. Ask a qualified repair technician to discharge, remove, and install the capacitor safely.