All Installation Instructions for LG Washer TCWL2013CS3

h2o filled w/o stopping

removed top, removed 2 screws, replace part. did not fix problem, the real problem was the water inlet valve, works great, easy fix. thanks

Parts Used:

Pressure Switch Assembly

sherman from BROKEN ARROW, OK
Difficulty Level:
Really Easy
Total Repair Time:
Less than 15 mins
Tools:
Pliers, Screw drivers

Was this instruction helpful to you?

The bolt on the motor rotor loosened allowing the motor shaft to wallow out the plastic bushing in the rotor.

Unplugged the washer,removed the rear cover, removed the old rotor assembly & installed the new rotor with thread lock on the retaining bolt.

Parts Used:

ROTOR ASSEMBLY

william from Mobile, AL
Difficulty Level:
Really Easy
Total Repair Time:
Less than 15 mins
Tools:
Nutdriver

Was this instruction helpful to you?

My Washer was leaking

The repair went well and your parts are easy to find. This is the second time I have used your services and both times have been great. Your parts are at great prices and your delivery is a lot faster that one would think.
Thank you

Parts Used:

Tub-to-Pump Drain Hose

Bruce from West Hills, CA
Difficulty Level:
Really Easy
Total Repair Time:
Less than 15 mins
Tools:
Nutdriver, Pliers

Was this instruction helpful to you?

Very visible tear in hose. It was 1 1/2" long

Simply took hose off from inside machine and replaced it with new one. The tore one had a stopper on one end that wrapped to front machine; inside filter compartment. So I put stopper on the other end of new hose and wrapped it to it's holding spot in filter compartment.

Parts Used: