TC407W Jenn-Air Trash Compactor - Instructions

All Instructions for the TC407W
106 - 110 of 110

Search repair tips from other customers using simple keywords like "replace", "fit", "remove", "inspect". DIY doesn't mean you have to do it alone!

Search filter:
Clear Filter
Your search term must have 3 or more characters.
compactor wouldn't compact
  • Tena from Parker, CO
  • Easy
  • 15 - 30 mins
  • Screw drivers
bought new gears, pulled it out and replaced the gears. wasn't very hard. I did expect a jenn-air to be better built (plastic gears really!) but for 30 bucks it is all better.
Was this helpful?
Thank you for voting!
the compactor was stuck in the down position
  • Rod from Quincy, IL
  • Easy
  • 15 - 30 mins
  • Screw drivers, Socket set
Had to first raise the screw plate that compacts the garbage. Then had to turn the compactor over and remove screws holding the bottom plate on in order to get to the gears. Once that was done I removed the worn gears and the chain drive and replaced with the new gears and the chain. Put the unit back together and works like a new one. A $35 dollar fix for a unit that sells for around $900 today. Thanks to partslect for being able to help me with the parts needed. Not only did I save on a new unit but by doing this myself I saved around $100 in labor charges.
Was this helpful?
Thank you for voting!
Ram stuck in down poaition
  • Candace from Ocala, FL
  • Really Easy
  • 15 - 30 mins
  • Wrench set
Replaced drive gears.They arrived in a kit from Parts Select with instructions.They fit perfectly and the compactor works like new.
Was this helpful?
Thank you for voting!
Ram was stuck in the down position
  • Joseph N from Wheaton, IL
  • Really Easy
  • 15 - 30 mins
  • Nutdriver
changed out the big gear that was broken
Was this helpful?
Thank you for voting!
Unit cycled when on switch operated and would not stop until Off switch was activated.
  • Gerald from Wickenburg, AZ
  • Really Easy
  • 15 - 30 mins
  • Nutdriver, Pliers, Wrench (Adjustable)
Replaced the limit switch. This did not alter the problem. Took off the On/Off/Start switch and dissasembled. I found the the Start switch was stuck in the on position. I reassembled the switch mechanism assuring that the Red "ON" indicator moldings were correctly positioned and reassembled everything. The Compactor now works properl y. Need to add "Check the Start switch" to diagnosis.
Was this helpful?
Thank you for voting!
All Instructions for the TC407W
106 - 110 of 110