T50S2 Bostitch Nailer - Parts

This is an original Bostitch replacement part manufactured for use with nailers. The thumbscrew also has a hex head and is generally used to secure the rear cover. This screw is sold individually please see model diagram for additional parts.

The pusher spring anchor goes next to the nose. This authentic item is supplied directly from the original equipment manufacturer for use with staplers made by Bostitch. This part is sold individually. A set of pliers might be helpful during the installation of this part. It will need to be replaced if it breaks or bends.

Restore your tool’s performance with this complete trigger valve repair kit for brad nailers and staplers. If your tool is leaking air or frequently misfiring, replacing the trigger valve may solve the issue. This kit includes everything needed for the repair: a valve assembly with two O-rings, lubricant, a spring pin punch, and step-by-s...Read moretep instructions. The included O-rings—also available separately—are common wear items that can cause performance issues when damaged. Installation is simple and only requires a hammer.

This is an authentic OEM sourced component which is specially made for use with Bostitch and Porter Cable mailers and staplers. It is a standard hardware which has multiple applications, please make sure to check the appropriate diagrams of your model for the correct location and application of this nut. Keep in mind this high-quality item is made of durable metal and is sold indvidually.

This authentic OEM sourced replacement part is designed for use with Bostitch nailers and staplers. The trigger provides a user with a comfortable grip to control the sequential trigger function of the tool. The sequential trip requires the operator to hold the tool against the workpiece before pulling the trigger. This makes accurate fas...Read moretener placement easier, for instance on framing, toe nailing and crating applications. The sequential trip allows exact fastener location without the possibility of driving a second fastener on recoil. The kit includes one high-quality plastic trigger and a durable metal pin to secure it.

The special spirol pin is made out of metal and attaches to the frame. This part is available as an individual replacement part. This is a genuine Bostitch replacement part used in compatible nailers. A roll pin punch might be needed during the installation process. It will need to be replaced if it becomes broken.

This is an authentic manufacturer-sourced replacement o-ring which is specially designed for use with Bostitch nailers and staplers. It helps to provide an air-tight seal for the main piston, over time the material may wear out and crack eventually requiring a replacement. It is made of high-quality rubber and it is sold individually.

It is a genuine item which is supplied directly from the original equipment manufacturer for use with Bostitch nailers and staplers. The purpose of this o-ring is to provide a tight seal between connected parts, please make sure to refer to the appropriate diagrams of your model for the correct location and application of this hardware. K...Read moreeep in mind this durable part is made of high-quality rubber and is sold individually.

This item is a genuine OEM replacement part by Bostitch. It is a part of the trigger valve assembly. These parts may need replacement if air is leaking through the trigger. An O-ring is a bendable piece that acts as a seal between rigid parts, designed to retain pressure. This piece is sold individually. Also sold with Trigger Valve Kit, part # TVA5.