All Installation Instructions for Bosch Dishwasher SHP65T56UC

Filter-Micro was clogged with lime from hard water.

Replacement was fast and very simple. Was completed in less than 5 minutes.

Parts Used:

FILTER-MICRO

Peter from LEXINGTON, KY
Difficulty Level:
Very Easy
Total Repair Time:
Less than 15 mins

5 of 6 people found this instruction helpful.

Was this instruction helpful to you?

Thank you for voting!

dishwasher door would not close properly, spray arm would not engage plug

popped off old spray arm from under the rack and put on new spray arm,
couldn't be any easier, 5 minute job, door closes easily now!

Parts Used:

Dishwasher Spray Arm

Brian from MADISON, CT
Difficulty Level:
Really Easy
Total Repair Time:
Less than 15 mins

5 of 6 people found this instruction helpful.

Was this instruction helpful to you?

Thank you for voting!

error code e 24 not draining

have had same problem many times under extended warranty pump was changed by factory and installed wrong it was jammed in so take out there is a realest lever and twist clockwise install buy twisting counter clockwize

Parts Used:

PUMP-DRAIN

Jody from OCEANSIDE, NY
Difficulty Level:
Really Easy
Total Repair Time:
30 - 60 mins
Tools:
Screw drivers

5 of 6 people found this instruction helpful.

Was this instruction helpful to you?

Thank you for voting!

The vinyl coating on one post on the upper dishwasher rack was damaged, which made the post start to rust rapidly.

The new rack arrived nearly ready to install. The brackets and wheels that connect the rack to the track in the dishwasher were already on the new rack when it was delivered. All I had to do was move some plastic parts from the old rack to the new rack. This is very easy and does not require any tools since the parts snap onto the racks. It's worth taking a moment to study the way each part is attached to the old rack before moving it to the new rack. Pay particular attention to exactly how & where the spray arm tube snaps to the rack. That tube took me two tries to get right. The whole operation took less than 15 minutes.

Parts Used:

CROCKERY BASKET

Douglas from KENDALL PARK, NJ
Difficulty Level:
Very Easy
Total Repair Time:
Less than 15 mins

4 of 4 people found this instruction helpful.

Was this instruction helpful to you?

Thank you for voting!

My flow tube had a hole in it

Initially, I received an E15 error. I evaluated for leaks but couldn't find anything except for water in the bottom of the dishwasher after about 30 minutes of the initial cycle. After discovering the hole in the flow tub, I order the part. It came a few days later & replace the part within a 15 minutes of receiving it. I didn't think it would resolve the issue but it did. Thank you!

Parts Used:

TUBE

Rick from LANDENBERG, PA
Difficulty Level:
Very Easy
Total Repair Time:
15 - 30 mins
Tools:
Screw drivers

4 of 4 people found this instruction helpful.

Was this instruction helpful to you?

Thank you for voting!

There was a roller missing from the lower washing rack.

There were 5 rollers still in place so I used them to show me how to snap the replacement roller in place.

Parts Used:

Dishrack Roller - Grey

George from STURGEON BAY, WI
Difficulty Level:
Really Easy
Total Repair Time:
Less than 15 mins

6 of 10 people found this instruction helpful.

Was this instruction helpful to you?

Thank you for voting!

WATER DRAIN MATRIX became plugged with sludge, stopping ventilation for draining function

removed machine so left side water drain matrix was accessible, replaced that unit, reinstalled machine to its built-in location.

Parts Used:

HOSE

WATER INLET

HOSE CLAMP

David from BURNSVILLE, MN
Difficulty Level:
Really Easy
Total Repair Time:
More than 2 hours
Tools:
Pliers, Screw drivers, Wrench set

5 of 7 people found this instruction helpful.

Was this instruction helpful to you?

Thank you for voting!

Wheels on the bottom tray broke off

The repair was extremely simple. Just lined up and popped them on. No tools needed.

Parts Used:

Dishrack Roller - Grey

Phyllis from BAYTOWN, TX
Difficulty Level:
Really Easy
Total Repair Time:
Less than 15 mins

4 of 5 people found this instruction helpful.

Was this instruction helpful to you?

Thank you for voting!

Over the years the filter became too clogged with embedded particles

Really simple. You pull out the drain filter plate and pull the filter off the support and replace. I gave everything a good cleaning and put it back in place.

Parts Used:

FILTER-MICRO

Jim from EDINA, MN
Difficulty Level:
Really Easy
Total Repair Time:
Less than 15 mins

4 of 5 people found this instruction helpful.

Was this instruction helpful to you?

Thank you for voting!

Four wheels on the lower dishwasher rack came off and got lost.

I bought replacement wheels.
I put them on the post, and they snapped onto the vertical post very easily. Job done.

Parts Used:

Dishrack Roller - Grey

james from PARSIPPANY, NJ
Difficulty Level:
Really Easy
Total Repair Time:
Less than 15 mins

3 of 4 people found this instruction helpful.

Was this instruction helpful to you?

Thank you for voting!

We accidentally damaged the upper spray arm

Easily removed the old one by carefully pulling it and repeated this procedure to replace it. Total time took less than 15 minutes

Parts Used:

Dishwasher Spray Arm

Sheldon from ROCKAWAY, NJ
Difficulty Level:
Really Easy
Total Repair Time:
Less than 15 mins

3 of 4 people found this instruction helpful.

Was this instruction helpful to you?

Thank you for voting!

Spray arm plug into water source became worn out and difficult to engage

The spray arm makes a slide in attachment to a slide out drawer. It was removed by forcing out of the connection on the back of the drawer and the replacement was installed by sliding it into the same connection point.

Parts Used:

Dishwasher Spray Arm