SHI6805UC-06 Bosch Dishwasher - Instructions

I just removed the lower panel according to the manual, but the easier way is to remove the upper control unit by lifting upward. The difficulty with removing the lower panel is that the heavy-duty plastic pieces at the door hinge area are prone to falling out while trying to reattach the heavy lower panel. Replacing the control unit was very easy. All of the connectors have small locks on the back sides. Spreading the plastic locks for the control unit itself lets it come right out. The new unit just snaps in. Just be sure each connector plug is seated and locked. It takes longer to describe it than to do it.

Use screwdriver to gently wedge the side of the dispenser body apart enough to pop out the old kid, then insert the new kid in it's place.

Remove spray arm. Pullout. Micro filter big screen . Tork bolt cover and small pliers to grab check valve flapper.

Removed old filter and replaced with new filter. Easy.

shut off water, pull dishwasher out, took side insulation off, unhooked what was connected to the float switch and replaced the new with the old. Reconnected everything and put insulation back and wa-la , all done

Remove front door remove screw holding pump replace pump