SCA2000FWW02 General Electric Microwave - Parts

This ceramic microwave fuse is just over an inch in length. It is white in the center, and metal on both ends. This is a 20-amp fuse, and is used to power your microwave. If the touch pad on the microwave becomes unresponsive, the microwave produces little to no heat, or the appliance simply does not turn on, it could mean that your fuse ...Read moreis at fault and needs to be replaced. Because this part contains an electrical charge, remember to disconnect power to the microwave unit before you begin this repair. NOTE: Before you start this repair, ensure that the microwave is unplugged, and the capacitor is discharged. A capacitor stores large amounts of electricity even after your microwave is unplugged.

This interlock switch is located in the door latch.

If your microwave won’t start even though the door is shut, this switch might be the reason. It helps your microwave know the door is closed so it can run safely. This genuine part is easy to install and can get your appliance working again. Just be sure to unplug the microwave before replacing it!

This light assembly helps you see your food while it’s cooking in the microwave. It includes a small bulb and socket that fit inside the unit, giving you a clear view through the door. If your microwave light has gone out, this part is an easy fix—just unplug the appliance first and swap it out.

This part will trip once the inside of the cavity overheats and exceeds the recommended temperature.

This diode cable is a replacement electrical component designed to regulate current flow within an appliance circuit. It helps protect sensitive components and is commonly replaced when electrical faults or power irregularities occur. Proper application should be verified before installation.

This part is electrically designed for securing the door of the microwave while it’s in use.

Also known as rotating ring assembly.

Sold individually. Appliance may take 2.