All Installation Instructions for LG Dryer RN1368CS

Dryer wasn't getting hot enough

Removed the exhaust duct screw and removed the duct. Hardest part of the repair was reaching in one-handed to remove the screws for the parts. Make sure that the screwdriver is magnetic. Changed parts and dryer working better than it has in months.

Parts Used:

Blower Thermostat

Dryer Thermistor

Richard from Houston, TX
Difficulty Level:
Easy
Total Repair Time:
15 - 30 mins
Tools:
Screw drivers

Was this instruction helpful to you?

Hole in drum

Found YouTube video followed it closely and did extensive cleaning. The lint on the felt of the drum was causing a rough rotation as well.

Parts Used:

TUB ASSEMBLY,DRUM

David from Boise, ID
Difficulty Level:
Very Difficult
Total Repair Time:
1- 2 hours
Tools:
Screw drivers

Was this instruction helpful to you?

I broke the igniter while adapting from Natural gas to LPG

This was a repair from a repair. It started as a conversion to LPG, in the process the igniter broke. The parts arrived quickly and we were able to get it back together and the wife is happy. Thanks.

Parts Used:

Gas Igniter

Nathan from Mount Vernon, WA
Difficulty Level:
A Bit Difficult
Total Repair Time:
30 - 60 mins
Tools:
Screw drivers, Wrench set

Was this instruction helpful to you?

fractured, broken drum.

Easy repair, more time spent de-linting the inside of the machine and the duct system.

Parts Used:

TUB ASSEMBLY,DRUM

Thomas from Los Altos, CA
Difficulty Level:
Easy
Total Repair Time:
30 - 60 mins
Tools:
Screw drivers

Was this instruction helpful to you?

Not heating correctly

Removed Top, then front and drum. Parts easy to access once drum is out. Recommend reading up on drum replacement. Would appear that all repairs will require taking it out.

Parts Used: