RF195ACWP Samsung Refrigerator - Instructions

Placed lower spring leg in hole first. Manipulated upper spring leg into upper hole with needle nose pliers.

I removed the old spring along with the sleeve and inserted the new one in its place. used a small screw driver to remove the sleeve and inserted the sleeve side in first. took 5 minutes..

Placed one end of the new spring in left hole and used the needle nose pliers to insert the other end of the spring in the right hole.

Held spring with needle nose pliers and slipped into place

replacing broken french door spring.

Partselect made the repair process incredibly easy by linking a how-to video that explained exactly what to do. Without the video, I was trying to take the whole washer apart, but the video noted a convenient opening that provided easy access.
This is my second experience with Partselect, and I am definitely a fan. How you can maint ... Read more ain a stockpile of parts for so many appliances (as well as providing installation guidance for at least some items) is remarkable. Thanks.

Replaced the spring on my French door refrigerator
Was super easy

had to replace the spring on the Mullion door . the how to video helped however the demonstration shows putting the spring on in the opposite way that my door calls for, so just I turned the spring around and done, other than that easy as pie.
thanks
Chris F.

I watched several repair videos and decided I could do this because I have been doing mechanical work for over fifty years.The videos convinced me it needed replaced it is a 2009 model I bought new. I ordered the new part from parts select it came in 3 or 4 days.The hardest part was removing the freezer door and reinstalling when I was do ... Read more ne.That wasn’t complicated just awkward.Removing the ice maker was simple and replacing it with the new one was easy.There was a protective plate on the front of the old one that wouldn’t fit on the new one.So I left it off.So far it has been working very well.

Very carefully used the pliers to put the spring in the two slots with the door mullion. Works like brand new

Lifted out the broken part and replaced with new spring.

after receiving spring installed spring in seconds. Thanks partselect.com Ryan Cappell

pushed new spring in.

The replacement was fairly simple. I removed the existing tray and detached the water line. Once the water line water reattached to the new tray I inserted into the ice maker.

*** The problem I'm having now is the water is not filling up the tray***
Not sure what I did wrong? Any help would be greatly appreciated!!!