RB195BSBB Refrigerator - Overview

Models starting with RB195BSBB

Enter a part description. DIY Heroes keep it simple, eg. "belt" or "pump".

Search filter:
Clear Filter
Your search term must have 3 or more characters.
Lower Guard – Part Number: DA63-01263C
$141.59
On Order
Lower Guard
Part #DA63-01263C
Ice Cube Tray – Part Number: DA63-02284B
$32.84
In Stock
Ice Cube Tray
Part #DA63-02284B
Tapping Screw – Part Number: 6002-000213
$5.95
In Stock
Tapping Screw
Part #6002-000213
Defrost Sensor – Part Number: DA32-10105R
$41.41
On Order
Defrost Sensor
Part #DA32-10105R
The Samsung Defrost Sensor (DA32-10105R) is a genuine part designed specifically for Samsung refrigerators. This sensor, sometimes referred to as a defrost thermostat or defrost temperature sensor, is an integral part of your refrigerator's defrost system.
Cover - Sensor;AD,PP,T1.0, – Part Number: DA63-02183A
$5.95
In Stock
Cover - Sensor;AD,PP,T1.0,
Part #DA63-02183A
Roller Fixer – Part Number: DA71-20277A
$5.95
Special Order
Roller Fixer
Part #DA71-20277A
Roller Assembly – Part Number: DA97-22036A
No Longer Available
Roller Assembly
Part #DA97-22036A
Temperature Sensor – Part Number: DA32-10105T
$37.61
In Stock
Temperature Sensor
Part #DA32-10105T
This temperature sensor (part number DA32-10105T) is for refrigerators. Temperature sensor DA32-10105T senses the temperature inside the refrigerator and sends information to the electronic control. Unplug the refrigerator and safely store any food that could deteriorate while the power is off before installing this part. Wear work gloves to protect your hands.
Thermal Fuse Assembly – Part Number: DA47-00095E
No Longer Available
Thermal Fuse Assembly
Part #DA47-00095E
Light/Door Switch – Part Number: DA34-00006C
No Longer Available
Light/Door Switch
Part #DA34-00006C
This part turns the light on/off as the door opens and closes.
Motor - Fan – Part Number: DA31-00003N
No Longer Available
Motor - Fan
Part #DA31-00003N
Chilled Rail (White) – Part Number: DA61-00370B
No Longer Available
Chilled Rail (White)
Part #DA61-00370B
RAIL-CHILLED, R(50);W2-P

Common Symptoms of models starting with RB195BSBB

How this model fails, and the parts that fix it.

See how others fixed this model. Time, tools, difficulty, and steps that lead to victory! View More

Search repair tips from other customers using simple keywords like "replace", "fit", "remove", "inspect". DIY doesn't mean you have to do it alone!

Search filter:
Clear Filter
Your search term must have 3 or more characters.
Ice Build up behind refrigerator internal panel
5 of 7 people found this instruction helpful.
  • David from WILMINGTON, DE
  • Really Easy
  • More than 2 hours
  • Pliers, Screw drivers
I performed the repair to my own refrigerator, after watching multiple YouTube videos. I installed a secondary heater for the defrost coils and replaced the defrost sensor. The defrost sensor was actually bad. Today, 1/27/2024 I rechecked the fix from last week. All seems to be good so far.

If I get any build up of any ice on t he bottom tray of the recessed panel where the drain port is located. I suspect I will also need a new Defrost Heater as well. For now the refrigerator is operating as expected. There is a small amount of ice build up as of today.

Also, I had recently replaced the drain tubes, added a longer heater element part to fit the drain hole, and cleaned the fins in the back of the refrigerator. Thank you.
Was this helpful?
Thank you for voting!
Fridge side no longer cooled, freezer still workekd fine.
3 of 5 people found this instruction helpful.
  • Roger from Belle Fourche, SD
  • Easy
  • 1- 2 hours
  • Screw drivers
A couple of blogs said the freezer defrost sensor should be replaced, so I ordered one. Did not fix it. I did, however find a service manual online and one of the blog sites and it showed me how to remove the inside duct work. I discovered the fan the recirculates the air across the evaporator coil was not working. Ordered a new fan mo tor and installed it, fridge works perfectly now.
Was this helpful?
Thank you for voting!
No plastic cover comes with part
2 of 4 people found this instruction helpful.
  • Blake from WAVERLY, VA
  • Really Easy
  • 30 - 60 mins
Have not done installation yet. Trying to figure out what to do since the part did not come with the plastic cover to go in front of the LED temp readouts. Part does no good without the cover.
Was this helpful?
Thank you for voting!