The relay switch may also be known as the door micro switch and is a part for your microwave. The function of this part is to monitor the door latch and communicate whether the door latch is open or c...
This roller guide sits underneath the glass turntable tray.
$129.31
Special Order
Questions And Answers for PLMV169DCD
Ask our experts a question about this model and we'll get back to you as soon as possible!
6 questions answered by our experts.
< Prev
1
2
Next >
Sort by:
Search filter:
Clear Filter
Your search term must have 3 or more characters.
Keep searches simple. Use keywords, e.g. "leaking", "pump", "broken" or "fit".
Sorry, we couldn't find any existing answers that matched.Try using some different or simpler keywords, or submit your new question by using the "Ask a Question" button above!
Mark
February 18, 2020
The screws that i was referring to in my previous question about the loose door are on the left side not the door handle . They hold the door to the frame
For model number PLMV169DCD
Hello Mark, thank you for your question. The screws that hold the front door panel to the frame inside are Part #: PS1150134. I hope this helps.
6 people found this helpful.
Was this helpful?
Thank you for voting!
Mark
February 18, 2020
There are 2 screws that fasten the door to the microwave body that have become loose and will not tighten, what part is needed to resolve this issue?
For model number PLMV169DCD
Hello Mark, Thank you for the question. This could be an issue with stripped screws or the handle. We suggest replacing the two screws and handle at the same time as they both could be worn. We hope this helps.
Door is very loose. There is a vertical plate that is part of, or welded to, the frame of the microwave. The plate has two tabs that project forward for the door to connect to. The whole plate has come loose. How does it attach? It appears that it had some very small spot welds. How do you recommend it be repaired?
For model number PLMV169DCD
Hello Dan, thank you for contacting us. The compatible door latch for your model is part number PS979580. In order to replace it, you may need to remove the door first. After that, place the door on a smooth surface. Remove the inner trim with the help of a putty knife. Un-thread the screws securing the inner door panel. You will get access to the screws securing the door latch. You may need to un-thread them to replace the door latch. We hope this helps!
Unit won't stop running, even after door is open & timer cycle is complete
For model number PLMV169DCD
Hello Otto, Thank you for the question. This is an indication one or more of the Door Switches are defective and should be tested or replaced. We hope this helps!
i need a door hinge screws that are visible when the door is open at the left corners of the oven opening the hold the door hinge snug to the front of the open oven
For model number PLMV169DCD
Hi David, thank you for contacting us. We have researched the model you have provided and have found that the part you are looking for is part number PS979606. We hope this helps!
I first removed the top plate above the microwave door (3 screws), then I removed the plate containing the buttons and clock. The microwave has 3 relay switches and they are in a little holder. The holder was too difficult to remove so I just removed the bottom switch and replaced. The microwave started right up.
Removed the 3 screws to drop the lower panel and, removeed the turn table plate and ring. Then removed the 2 screws holding the motor, the 2 wires attached to the motor and removed the old motor.Replaced the new motor in the reverse order. DO NOT FORGET TO UNPLUG THE MICROWAVE FIRST.
was told buy a repair person to check the door micro switches as it was a common problem. removed the top plastic air grill to get access to the screw that holds in place the control cover. After unplugging the unit, i took out the (2) screws that held in the switches and removed them (3). One switch was a bit melted so i tested it with a 12 volt battery and it was bad. Ordered a new one from Part select and got it fast . Works great .
