All Installation Instructions for General Electric Refrigerator PFSS9PKYBSS

on the french doors my granddaughter kept turning the inner seal bar when the door was open and when we went to close it it was in the wrong position and eventually the upper hinge broke

I took a small straight screw driver and popped the cap case off, removed old hinge and installed new hinge and snapped the cap back in place.. took all of 30 seconds

Parts Used:

French Door Hinge

CAP CASE FRENCH

david from bridge city, TX
Difficulty Level:
Really Easy
Total Repair Time:
Less than 15 mins
Tools:
Screw drivers

Was this instruction helpful to you?

Thank you for voting!

Spring broke

Installed new spring pin and spring. Took only 2-3 minutes. It was more difficult to get the correct part since the spring pin was the only number listed in the part diagram and I actually needed the spring and had to call customer service to get the correct part number.

Parts Used:

French Spring Pin

Sharol from Culdesac, ID
Difficulty Level:
Really Easy
Total Repair Time:
Less than 15 mins

Was this instruction helpful to you?

Thank you for voting!

replace water filter

Easy, with included video and instructions

Parts Used:

Refrigerator Ice and Water Filter

Richard from Waynesboro, PA
Difficulty Level:
Easy
Total Repair Time:
Less than 15 mins

Was this instruction helpful to you?

Thank you for voting!

Change Filter

My 14 year old Son

Parts Used:

Refrigerator Ice and Water Filter

GREGORY from SACRAMENTO, CA
Difficulty Level:
Really Easy
Total Repair Time:
Less than 15 mins

Was this instruction helpful to you?

Thank you for voting!

Ice and Water Filter needed replacement

It was easy and fast, like changing a light bulb. The directions were clear and easy to follow. Thank you.

Parts Used:

Refrigerator Ice and Water Filter

Irene from Tigard, OR
Difficulty Level:
Really Easy
Total Repair Time:
Less than 15 mins

Was this instruction helpful to you?

Thank you for voting!

did not need adapter

exactly as the instructions.......never did see anything about replacing the adapter...therefore i did not

Parts Used:

Refrigerator Ice and Water Filter

terry from fort worth, TX
Difficulty Level:
Really Easy
Total Repair Time:
Less than 15 mins

Was this instruction helpful to you?

Thank you for voting!

Ice Maker assembly was leaking into cube tray and fusing all cubes together.

Remove Ice maker tray and remove one screw on left side holding wire harness cover on. Remove wire harness cover, disconnect wire harness, pull out Ice Maker Assembly. Install new Ice Maker Assembly, plug in new wire harness & screw harness cover back on.

Parts Used: