My Orders
- Home
- PFE28KYNJFS
- Instructions
PFE28KYNJFS General Electric Refrigerator - Instructions
Search repair tips from other customers using simple keywords like "replace", "fit", "remove", "inspect". DIY doesn't mean you have to do it alone!
Search filter:
Clear Filter
Your search term must have 3 or more characters.
Food section of fridge always warm
-
Troy from Dacula, GA
- Easy
- 15 - 30 mins
-
Pliers, Socket set
Located temperature sensor on condenser in the freezer section( as per instructional video ). Cut off bad sensor with wire cutter then soldered on the new sensor and sealed with electrical shrink wrap.
Was this helpful?
Thank you for voting!
freezer no cold enought
-
John J. from Deland, FL
- Really Easy
- 15 - 30 mins
-
Nutdriver, Pliers
as per video- follow all of the videos and u r going to save a lot of money tx partselect im glad I found u guys ps only order from partselect.com they only ship the correct parts remember look at the video select the symptom and buy as per video tx again problemsolved
Was this helpful?
Thank you for voting!
Starter/overload assembly and run capacitor were bad
-
Colby from Blanding, UT
- Really Easy
- 15 - 30 mins
-
Screw drivers
Removed rer cover, unplugged starter assembly from side of compressor and replaced unit with a new one. Plugged fridge in and it works good.
Was this helpful?
Thank you for voting!
coil frosting up and refridgerator section was not cooling
-
Vernon from Harmony, NC
- Really Easy
- 15 - 30 mins
-
Nutdriver, Screw drivers
took out shelves and removed the back plate my removing 2 screws with a nutdriver.removed the old defrost timer and defrost heater which was really easy.then installed the new ones.the video i watched on the website was really helpfull.
Was this helpful?
Thank you for voting!
refig light did not work
-
paul from east hanover, NJ
- Really Easy
- 15 - 30 mins
-
Pliers, Screw drivers
per your instructions
Was this helpful?
Thank you for voting!