The lower spray arm is mounted to the bottom of your dishwasher tub, and it rotates and sprays water to clean the dishes in the lower dish rack. This spray arm is made of gray plastic, and is approxim...
The circulation pump adapter, or pump adapter assembly connects the circulation pump to the tub of your dishwasher. If your dishwasher is leaking around this adapter, check the connection to ensure ev...
The hinge link on your dishwasher connects the spring to the dishwasher door hinge. If the hinge link becomes cracked or damaged, you may not be able to shut or lock your dishwasher door properly. In ...
This part is the replacement door hinge cable for your dishwasher. The door hinge cable connects the door spring to the door hinge, and allows the door to open in a controlled fashion. If you open you...
This part is the replacement for the middle spray arm in your dishwasher. The middle spray arm is mounted on the bottom of the middle dish rack, and it should rotate and spray water during the operati...
$71.88
Special Order
Questions And Answers for PDW9880L00SS
Ask our experts a question about this model and we'll get back to you as soon as possible!
2 questions answered by our experts.
< Prev
1
Next >
Sort by:
Search filter:
Clear Filter
Your search term must have 3 or more characters.
Keep searches simple. Use keywords, e.g. "leaking", "pump", "broken" or "fit".
Sorry, we couldn't find any existing answers that matched.Try using some different or simpler keywords, or submit your new question by using the "Ask a Question" button above!
Bill
December 1, 2019
In filter sump there is white tube. I cant find in diagram or parts list. Mine is falling apart. Do i need to replace. Could it be causing problems which keep the dishwasher from running.It turns on then stopswithin a couple of minutes.
For model number PDW9880L00SS
Hi Bill, thank you for your question. It sounds like you might be referring to the adapter. That would be this part here: PS1019542, we have a photo on our site where you can view the part. I hope that helps. Good luck with your repair.
Please advise as to why the dishwasher switches off automatically after switching it on. Within seconds of starting it, it switches off
For model number PDW9880L00SS
Hello Sandy, Thank you for the question. We suggest checking to see if the door is securely latched and the door is level. This could also indicate the Door Latch is damaged or defective or the Latch Micro Switch is faulty. The Switch can be tested with a Multimeter to check the continuity. We hope this helps!
All I had to do is take out the rack, pop off the old wheels, place the new stud rollers on, then pop on the new wheels. So easy and now my dishes don't get chipped when I pull the rack out and push it back in. I wish I didn't wait so long to order new parts.
I removed the old wheels & studs on the right side of the bottom rack of the dishwasher, and I gleefully THREW THEM ALL OUT! HA HA!
Then I put the nice new rollers on the studs, and then I put them on the rack.
Helpful hints for others beleaguered by this design problem:
1) Be sure to get new studs - that's the part that kept causing the wheels to fall off
2) Put the rollers on the studs before putting them on the rack. (Another user on this site noted that, and it was very helpful).
3) P.S. Very prompt shipping, great service - I will definitely use this company again. And thanks to whoever dropped a cheerful Christmas candy into the box!!