PDW9280L00SS General Electric Dishwasher - Parts

Aids in the opening and closing of the dishwasher door.

Aides with movement or sliding of the dishrack.

This part is a replacement middle spray arm bearing for your dishwasher. The spray arm bearing reduces friction and allows the spray arm to rotate during the operating cycle. If the spray arm is not rotating or cleaning dishes properly, or is noisy during operation, you may need to replace the spray arm bearing. This is a bearing for the ...Read moremiddle spray arm, which is mounted to the bottom of the upper dish rack. The bearing is made of metal and is approximately one inch in diameter. This part is sold individually and is an OEM part.

This part is the replacement side trim gasket for your dishwasher. It is black in color and is approximately 24 inches long and 1 inch wide. The gasket runs along the side of your dishwasher, between the dishwasher and the cabinet. It is used for aesthetic purposes, and also as a sound curtain. The main reason you would want to replace th...Read moree door seal is if it is torn or missing. You will need a Phillips-head screwdriver to remove the dishwasher from the cabinet for this repair. This part is sold individually and is an OEM part from the manufacturer.

This part is the upper spray arm for your dishwasher. It is made of gray plastic and is approximately 11 inches wide. The upper spray arm is mounted to the top of the dishwasher tub and rotates during the cycle to ensure that your dishes are washed evenly. If your spray arm is clogged or damaged, your dishes may not clean evenly, and you ...Read morewill need to replace the spray arm. To access the spray arm, you will need to remove the top dish rack, then simply unscrew the old arm. Screw the replacement arm in and replace the dish rack to complete the repair.

The pump ejects the water from the dishwasher.

This works in conjunction with the pump and filtration system. It is used to filter the drainage for disposal.

This upper spray arm screw is a manufacturer-approved replacement part for your dishwasher. The spray arm is an integral part of the dishwashing process, so keeping it maintained is crucial. To replace this screw, remove the upper dishrack by popping out the dishrack stops on each side. Pull out the dishrack and use a 1/4 inch nut driver to unscrew the upper spray arm screw.

This filter is used to collect large food particles that can't pass threw the drain pump.