Models > PDW8060G03SS > Instructions

PDW8060G03SS General Electric Dishwasher - Instructions

All Instructions for the PDW8060G03SS
31 - 31 of 31
Keep searches simple. Use keywords, e.g. "leaking", "pump", "broken" or "fit".
No water getting into the dishwasher
This is a somewhat difficult task in that the dishwasher had to be pulled out of the cabinet which required the water inlet hose to be removed (and water to the hose to be shut off). Once the dishwasher was free of the cabinet it had to be flipped over to reach the water inlet valve. Once the valve was replaced go in reverse to reinstall the dishwasher. Worked fine after I got everything installed; no leaks.
Parts Used:
Water Inlet Valve
  • Don from Herndon, VA
  • Difficulty Level:
    A Bit Difficult
  • Total Repair Time:
    1- 2 hours
  • Tools:
    Nutdriver, Screw drivers, Wrench (Adjustable), Wrench set
Was this instruction helpful to you?
Thank you for voting!
All Instructions for the PDW8060G03SS
31 - 31 of 31