PCT23MGPCBB General Electric Refrigerator - Parts

This crank door recess is supplied directly from the original equipment manufacturer. The plastic part is fastened behind the interface dispenser assembly in the freezer door. Activated by the dispenser solenoid, this part regulates the opening and closing of the ice chute door. A screwdriver is needed for the repair. The crank door recess is sold individually.

10-16 pl pnp 5/8 szn - Sold individually.

This part is the replacement fresh food door gasket for your refrigerator. It is made of black rubber and is sold individually. The fresh food door gasket runs along the circumference of your refrigerator’s fresh food door and creates the seal that allows your refrigerator to regulate the temperature inside. If the gasket is worn, stretch...Read moreed, or damaged, your fridge may become too warm, and you may notice the door is sweating. The door also may not open or close properly because of a damaged gasket. To replace the gasket, carefully pull the old gasket out the grooves it fits in around the door. Press the new gasket into the same grooves snugly. This part is an OEM part from the manufacturer.

This dispenser housing shield kit contains genuine replacement parts. It includes the dispenser funnel, frame, spring, and the hardware you will need to install it. The funnel and frame are made out of black plastic. Before installing a new dispenser make sure you shut the water supply off and unplug the refrigerator.

Includes the wiring harness and thermistor. This evaporator fan motor is located in the back of the freezer, and circulates air over the refrigerator coils. These coils will convert the heat into cool air, which is then circulated.

Keep your refrigerator neat and organized with this crisper cover glass. It sits above the crisper drawers to give you extra space for food and helps prevent spills from spreading. If your old glass is cracked or broken, this replacement fits right into the frame for an easy fix. The clear glass is strong and easy to clean, so your fridge stays looking great. Just slide it into place—no tools required!

This dairy door is a manufaturer approved replacement part for your refrigerator. This part covers the shelf which houses food products such as butter in your fridge. It is made of clear plastic and is approximately 16 inches wide and 8 inches high. Replacing this part is easy, simply snap the old door off its mounting tabs, and secure the new one in place.

This part is a replacement recess grille tray for your refrigerator. This recess grille tray sits below the ice and water dispenser, and collects any spills. If your dispenser grille tray is broken or missing, this is the part that replaces it. This part is made of black plastic and is approximately 7 inches wide. It is sold individually and is an OEM part from the manufacturer.