PCC641LB (Type 1) Porter Cable Impact Driver - Parts

Keep your bit holder secure with this genuine OEM spring for DeWalt impact drivers. Authorized by the manufacturer and sold individually, this durable metal spring is designed to maintain pressure on the N078437 sleeve and the rest of the bit holder assembly, ensuring that the bit stays firmly in place during use. If the spring fails or b...Read moreecomes worn, the bit may no longer be held securely—making replacement essential for safe and effective operation. This part is commonly used in a variety of DeWalt impact drivers and requires only a screwdriver for installation. Simply disassemble the bit holder assembly, remove the worn spring, and install the new one in its proper position to restore full functionality.

This is an OEM part sourced directly from the manufacturer. The switch assembly is found in a Porter Cable drill/driver. This part is a complete assembly, including a high-quality plastic trigger switch with plastic housing, metal connectors, and metal wires with flexible plastic coating. The switch is used to activate the machine. You will require a screwdriver when replacing this item.

Support your fasteners and maintain tool performance with this genuine OEM washer for DeWalt impact drivers. Sourced directly from the manufacturer, this high-quality metal washer provides a reliable bearing surface for load distribution or serves as a spacer, depending on your tool’s configuration. It’s compatible with a range of DeWalt ...Read moreimpact driver models and is sold individually for easy replacement. If you're unsure of the correct placement, be sure to consult your tool’s diagram to ensure proper installation and function.

Keep your bit holder assembly secure with this genuine OEM Hog Ring for DeWalt impact drivers. Sourced directly from the manufacturer and sold individually, this durable metal ring is designed to sit at the very front of the sleeve, holding the bit holder assembly together. Without it, the entire assembly may come apart, leading to tool m...Read morealfunction or lost components. Replacing the hog ring is a straightforward repair that requires only a screwdriver. Carefully remove the existing ring from the sleeve, position the new one in place, and secure it to ensure the bit holder remains intact and functional. This part is compatible with a range of DeWalt impact drivers, so be sure to check your model for compatibility.

Secure your screw bits with this genuine OEM part for DeWalt impact drivers. Sold individually and sourced directly from the manufacturer, this component is part of the bit holder system and plays a key role in keeping the screw bit firmly in place once inserted. Without it, the bit may not stay seated properly during use, which can affec...Read moret performance and safety. This part is compatible with the DeWalt impact drivers listed below—be sure to check your model for compatibility before ordering.

This is a genuine OEM part. The DeWALT sleeve is constructed of metal, and is compatible with several impact drivers. This component is fitted in the nose cone, between the spring and washer. The sleeve secures the anvil assembly and the spring. This part is sold individually. A hex key and a screwdriver may be helpful in the repair.

Lock your bits securely in place with this genuine DeWalt OEM Steel Ball. Designed as part of the chuck assembly in select DeWalt impact drivers, this 3.5mm steel ball plays a crucial role in holding the bit firmly once inserted. When you pull back the sleeve of the chuck and insert a bit, the steel ball is the component that locks it int...Read moreo position, ensuring stability during operation. This high-quality metal part is sourced directly from the manufacturer and is sold individually. A screwdriver is typically required for installation. Be sure to check your model’s compatibility in the list below before ordering.