My Orders
- Home
- MV-1643MTSL
- Instructions
MV-1643MTSL LG Microwave - Instructions
Search repair tips from other customers using simple keywords like "replace", "fit", "remove", "inspect". DIY doesn't mean you have to do it alone!
Search filter:
Clear Filter
Your search term must have 3 or more characters.
Microwave failed to head and light, fan, and turntable failed to come on.
1 of 2 people
found this instruction helpful.
-
Robert from Cedar Park, TX
- A Bit Difficult
- 30 - 60 mins
-
Nutdriver, Screw drivers
Problem was due to a faulty door switch. Replaced with a new switch and the microwave now works fine! Only thing that was tricky was that LG uses the hex screws with a peg in the middle to keep the microwave cover on. Had to use a small screwdriver and pliers (on the screwdriver) to unscrew the screws.
Was this helpful?
Thank you for voting!
Broken Tray ,Glass
0 of 1 people
found this instruction helpful.
-
Gena from ROSICLARE, IL
- Really Easy
- Less than 15 mins
Received my replacement Tray,Glass in only 2 days. Opened it and placed it in the Microwave. Yep, it was that easy!
Was this helpful?
Thank you for voting!
light bulb replacement
9 of 31 people
found this instruction helpful.
-
Marianne from CHURCH HILL, MD
- Very Easy
- Less than 15 mins
very simple
Was this helpful?
Thank you for voting!
Light bulb burned out
-
Craig from Burke, VA
- Really Easy
- Less than 15 mins
-
Screw drivers
I unscrewed the light cover, removed the burned out light bulb and replaced it with one I ordered on Partselect.com. It was very easy.
Was this helpful?
Thank you for voting!
Microwave would not heat food, but everything else worked.
-
Samuel from Daleville, VA
- Really Easy
- 15 - 30 mins
-
Screw drivers
Problem was a faulty door latch switch. I easily accessed the switch by removing the control panel, total of 4 screws. After that, just disconnected the three switch door latch assembly and connected the new one. Took about half an hour and was very easy. Unit works perfectly now.
Was this helpful?
Thank you for voting!
No Heat
-
Dennis from Chesapeake, VA
- Really Easy
- 15 - 30 mins
-
Screw drivers
1. Removed unit from the cabinet. (2 screws). 2. Remove the outer microwave metal shell. (10 screws). 3. Locate and remove part. (3 screws). 4. Install new part and replace all screws. 5. Install unit back into cabinet. So easy. I will share this site with all of my friends.
Was this helpful?
Thank you for voting!