1. Home
  2. MQ1745ATL
  3. Instructions

MQ1745ATL (AS1ELGA) LG Microwave - Instructions

All Instructions for the MQ1745ATL
16 - 20 of 20

Search repair tips from other customers using simple keywords like "replace", "fit", "remove", "inspect". DIY doesn't mean you have to do it alone!

Search filter:
Clear Filter
Your search term must have 3 or more characters.
microwave turn table not working
1 person found this instruction helpful.
  • RICHARD from CARY, NC
  • Easy
  • 15 - 30 mins
  • Screw drivers
Removed the phillips screws from the base.

Using a # 10 secure driver, remove the motor. (I recommend obtaining a secure star driver set to be sure you have the right size)

Replace the spacer, which is a separate part from the motor.

Reinstall the spacer and motor.

Reinstall the bottom panel.

Enjoy!
Read less
Was this helpful?
Thank you for voting!
Leek
1 person found this instruction helpful.
  • Krzysztof from NEW BRITAIN, CT
  • Easy
  • 30 - 60 mins
Change gasket
Was this helpful?
Thank you for voting!
Microwave failed to head and light, fan, and turntable failed to come on.
1 of 2 people found this instruction helpful.
  • Robert from Cedar Park, TX
  • A Bit Difficult
  • 30 - 60 mins
  • Nutdriver, Screw drivers
Problem was due to a faulty door switch. Replaced with a new switch and the microwave now works fine! Only thing that was tricky was that LG uses the hex screws with a peg in the middle to keep the microwave cover on. Had to use a small screwdriver and pliers (on the screwdriver) to unscrew the screws.
Was this helpful?
Thank you for voting!
Wanted to see the instructions before I install it.
2 of 5 people found this instruction helpful.
  • Rene from MORENO VALLEY, CA
  • Really Easy
  • 30 - 60 mins
Wanted to see the instructions before I install it.
Was this helpful?
Thank you for voting!
Had to lift on the door for the microwave to run, suspected the door switches.
  • Arthur from Windham, NH
  • Easy
  • 30 - 60 mins
  • Pliers, Screw drivers
Ordered the switches from Partselect, arrive in two days. Had trouble removing the plastic connectors from the old switch terminals, one of the plastic protectors broke, but was able to reuse it. It took a little figuring out how to remove the existing switches. Must push in a tab and rotate the switch on a little pin, then remove. Must b e careful not to break the plastic tabs holding the switches in place. Replaced all (3) switches at the same time. All in all it was pretty easy.
Read less
Was this helpful?
Thank you for voting!
All Instructions for the MQ1745ATL
16 - 20 of 20